I have both upper and lower dentures, but the uppers, which are newer, are very white compared to the bottoms. It will cost me a lot (like $500) to replace them, but I want them to match. Can I whiten my dentures?Answer: It is not possible to whiten dentures like natural teeth because dentures are made of plastic. To minimize staining, properly clean your dentures daily to remove food and plaque bacteria. Brushing with a denture brush or soft toothbrush will prevent dentures from becoming permanently stained and will keep your mouth healthy. Moisten the brush and apply a nonabrasive denture paste (regular toothpaste is too abrasive) or use liquid soap. Brush every surface, inside and out, scrubbing gently. A variety of over-the-counter denture-cleanser products may be safely used (by following the manufacturer’s instructions) to remove some stains. You may also consider soaking your dentures in a cup of water with a teaspoon of household bleach, but be sure to rinse them off well before putting them back in your mouth. When cleaning your dentures, be careful not to drop them as they can break. You should clean your dentures over a sink that is filled with water or has a washcloth in place to prevent the dentures from breaking should you drop them while cleaning. More stubborn stains may require removal by your dentist or prosthodontist, a specialist in denture care and maintenance. To locate a prosthodontist near you, visit www.gotoapro.org. Response provided by the American College of Prosthodontists. Back to top

Medically, the consequences of not replacing missing teeth include unwanted and unhealthy nutritional changes. There are also potential risks of diabetes, obesity, heart disease, depression, and an increase in the likelihood of developing cancer. These are all prominent health risks that are avoidable by providing a dental structure with partial dentures or another quality tooth replacement option.

The fabrication of a set of complete dentures is a challenge for any dentist/denturist. There are many axioms in the production of dentures that must be understood; ignorance of one axiom can lead to failure of the denture. In the vast majority of cases, complete dentures should be comfortable soon after insertion, although almost always at least two adjustment visits are necessary to remove the cause of sore spots. One of the most critical aspects of dentures is that the impression of the denture must be perfectly made and used with perfect technique to make an accurate model of the patient's edentulous (toothless) gums. The dentist or denturist must use a process called border molding to ensure that the denture flanges are properly extended. An array of problems may occur if the final impression of the denture is not made properly. It takes considerable patience and experience for a dentist to know how to make a denture, and for this reason it may be in the patient's best interest to seek a specialist, either a prosthodontist or denturist, to make the denture. A denturist is a trained and licensed professional who sees patients in need of dentures, partials, relines or repairs. A denturist not only takes the impression, but makes the entire denture in his or her own laboratory. The denturist then schedules a date for the delivery of the finished dentures to the patient. A general dentist may do a good job making dentures, but only if he or she is meticulous and experienced. Many dentists no longer make dentures themselves. but instead take an impression of the patients' mouth and then either send the impressions to a dental laboratory, which could be anywhere in the world, or send the patient to a denturist. Once the laboratory receives dental impressions of the patient's mouth, the laboratory creates plaster molds from them. The laboratory uses the molds to create the wax rims used to register the patient's bite. These wax rims are returned to the dentist, who uses them to register the patient's bite. The dentist may assist the patient in choosing the correct size of teeth for the dentures, or simply make the selection himself. Once bite registration is completed and the teeth are selected for the dentures, the wax rim is usually returned to the dental laboratory in order to have the denture teeth set into the wax. Once the teeth are set into the wax rim, the result is a prefinished denture that looks almost like the finished product. This prefinished denture is usually returned to the dentist's office and the patient usually has a chance to approve the setup (for immediate or standard dentures) or to try the denture before it is finished. After approval by the patient, the dentist returns the pre-denture to the laboratory for final processing. The finished denture is then returned to the dentist's office for delivery to the patient.
In need of a professional dentist.I live in Northwest Ohio. Had my left leg amputated some years back. Then I came down with mrsa., so now I'm in need of dental help. After the Drs removed my leg then after year, they had come back and take off 2 more inches. I was fitted with a prosthetic and it never fit. Then I spend 2 1/2 years in a nursing home that sucks. I'm afraid of getting ripped off with getting false teeth.If anyone can recommend a dentist that does this kind of work in Northwest Ohio please email me. THANKS IN ADVANCE I just want to smile again.
Complete Dentures: Complete dentures are made of a plastic base that is colored in order to replicate gum tissue and supports a full set of plastic or porcelain teeth. The traditional full denture is held in the mouth by forming a seal with the gums. They can also be held in place by attaching to dental implants that are surgically placed in the bone of the jaws. This treatment is much more expensive than the traditional complete denture.
This is my third time taking my grandpa to this establishment. Every time our “appointment” is never when we go back. We have to wait almost 3 hours to even get to the back. When I asked someone at the desk how long it would be they said “you are next to go back” that was almost an hour ago, and more than 7 people have went in before us. If you make an appointment you should not have to wait 3 hours for someone who has not made an appointment.

Complete dentures are made when gums are restored to a healthy condition and sufficient time has passed for healing. Complete dentures replace all teeth in the upper or lower jaws of the mouth. Gums will naturally shrink through the healing process of tooth loss, which normally takes from six to 12 months. During this period the immediate dentures may require adjustments to accommodate the changes in the gums and underlying bone structure. This could include soft and hard relining procedures.
Most patients need a few weeks to get used to the feel and use of their new dentures. Until the muscles of the cheeks and tongue adjust to the new dentures and learn to keep them in place, they may feel a little loose. It will also take time before you are comfortable putting your dentures in place and removing them. Since the mouth increases the amount of saliva produced in reaction to the new dentures, patients should expect to have mild sores and irritations in their mouth.
dr recommended immediate dentures. what I read on immediate dentures was that they are generally temporary. apparently per this dentist not so. now wants to charge 380 for reline knowing the bone was receded a lot and would have to reline right away. given all I know now, I would never go to this dentist again. ask more questions, get more estimates from other dentists. upper plate only has 12 teeth in it. inside of teeth do not touch lower permanent teeth, gap of at least 1/8 " between gm and inside of plate, gum does not touch bottom of gums at all.

Hello, I hate to leave a bad review about anything but I started my "new teeth" adventure in May 2017, my husband had paid upfront for the ultimate fit package and I was 100% sure there were no teeth solid enough to leave in my mouth, but, they (Dr **) & Staff did. I feel from what was told to me by the Dr., the bottom front 6... they are absolutely not supposed to be in my mouth and after the horrible almost year of no teeth except for the rotted bottom and being told one thing yet getting the exact opposite when the appointment took place and at the end of the journey to get my permanent's on top and a very sketchy partial which had already poked a hole through the enamel on my own tooth, repeated calls and in person visit being told that I "had to wait until they fall out"..??!! REALLY?!

Are you missing many or all of your teeth? If so, dentures may be the solution for you! Dr. Taylor or Dr. Carmichael provide custom full and partial dentures at Affordable Dentistry and Orthodontics, designed and created at our in-house dental lab, to restore your smile and the shape of your face. We invite you to call our office at 214-330-7771 to learn more about dentures in Dallas, Texas, and schedule a consultation with one of our skilled dentists.
As one of the oldest and most established dental support organizations in the United States, Affordable Care, provides 360° business support services to affiliated Affordable Dentures & Implants practices and their on-site Affordable Dentures Dental Laboratories. Affiliated AD&I owners oversee all clinical decision-making in their practices, but they also rely on Affordable Care staff to deliver nonclinical services that help drive down costs—savings we can pass along to patients nationwide.
Complete Dentures: Complete dentures are made of a plastic base that is colored in order to replicate gum tissue and supports a full set of plastic or porcelain teeth. The traditional full denture is held in the mouth by forming a seal with the gums. They can also be held in place by attaching to dental implants that are surgically placed in the bone of the jaws. This treatment is much more expensive than the traditional complete denture.
After implant-supported dentures are in place, patients should properly care for their teeth and gums. The dentures, gums, and tongue should be brushed twice a day. Patients should also floss daily to remove debris between the teeth; though false teeth won't become damaged by decay, plaque build-up can still cause gum disease and bad breath. Patients with dentures should also schedule dental visits every six months so their dentists can check the fit of the dentures and look for signs of dental problems. 
My teeth are never secure and have to reapply adhesive several times a day. Is this normal?? Think I'll find somewhere else for my lowers... get what you pay for. I was having severe pain in some of my lower teeth on that last visit, also. I asked for a Rx for antibiotics but Renee told me I did not need them. I now have an abscess and look like a squirrel. Thanks, Renee!! By the way, Renee, the mouth does NOT exaggerate!! Thanks for your great patient care!!!
If you are in need of replacing an entire arch of teeth, a full arch denture is going to be the most affordable tooth-replacement option. Additionally, not having any teeth causes mild to severe physical changes in your face mouth and lips. A full arch denture can restore some biting and chewing functionality and bring back a more attractive appearance.
Powder application. Sprinkle a thin, uniform layer throughout the tissue-bearing surface of the denture. Shake off excess powder and press the denture into place. Powders may be preferred over pastes because they are easier to clean off the denture and tissue. In addition, they don't have the same tendency as pastes do to "shim" (keep the denture away from the tissue).
When you want to replace missing or damaged teeth in Mesquite, TX, learn more about dentures and implants with Affordable Dentures & Implants®. It’s possible to improve your smile and even your life with comfortable and attractive treatment options. Here at our practice, we can provide you with affordable, custom-made dentures or implant solutions that function and feel like your natural teeth.
A film of saliva typically helps hold dentures in place. Denture adhesives may be used if the salivary glands do not produce a sufficient amount of saliva. Denture adhesives are not, however, a remedy for ill-fitting dentures. A denture that fits poorly (i.e., feels loose or causes discomfort) may need to be relined or replaced as it can contribute to the development of mouth sores.
Every tooth in your mouth is vital to maintaining proper alignment, and spaces left behind by one or more missing teeth can have an effect on your bite, speech, smile, and face shape. Missing teeth can cause your remaining teeth to shift and cause problems with your bite. To preserve your oral health and dental hygiene, you should weigh your options when it comes to tooth replacement treatments and choose the procedure that meets your needs.
Lab management needs better education on how to speak to employees when they make mistakes and to not put so much pressure on trying to make everything perfect. I felt as after my 90 days were up the lab manager started treating me differently in a negative way. I know I was struggling and my performance may have been slightly off towards the end due to personal issues but management could have handled it differently instead of being more demanding.
They deserve ten stars. Took my elderly blind neighbor to Bright Now dental and waited over an hour and a half past our appt time. Was so angry we walked out and didn't know what to do so we found Dental Works in the same mall. We had no appt but they fit us right in. They were wonderful. Had to have 12 teeth pulled and now onto dentures. All the women that work there are very friendly and caring. Dr Chi was great and very gentle on a poor lady who was scared to death. Would highly recommend them and their price was the best too!!!!! More

Dentures are artificial teeth and gums that are formed to your mouth and created by your dentists to replace lost or removed natural teeth. Dentures can either be full or partial, meaning they can either replace all teeth on either the top or bottom gum line, or just a few that are missing. Regardless of what kind of dentures you may need, they will be custom designed to fit your mouth, and visually matched to your existing teeth.
Our office is independently owned and operated, but we have the resources of a national network of implant and denture providers. With our on-site lab, we’re able to deliver same-day results in many cases. We strive to maintain lower rates by avoiding off-site lab needs and relying on our own highly trained technicians. Financing is available for qualified borrowers, and we do accept some insurance plans. If we’re not in your network, then we can provide you with a walk-out statement so you can expedite your own claim.
Tooth-supported fixed bridge. The most common alternative to dental implants for a single tooth, fixed bridges involve grinding away – in other words, intentionally damaging – healthy adjacent teeth that are used to attach and support the bridge. The tooth-supported bridge does not stimulate natural bone growth beneath it, so the bone may deteriorate over time. Bridges generally fail after 5-10 years because patient have difficulty flossing them, which makes the root surfaces below and around the bridgework highly susceptible to decay.

It is extremely important to practice healthy dental hygiene when wearing dentures. There is an increased risk of developing a more serious medical condition should oral irritation result from improper dental hygiene. These conditions include, but are not limited to, periodontal disease, leukoplakia (thickened white, potentially precancerous patches on the mucous membranes, also called smoker’s tongue) and fungal (denture stomatitis) infections.
A film of saliva typically helps hold dentures in place. Denture adhesives may be used if the salivary glands do not produce a sufficient amount of saliva. Denture adhesives are not, however, a remedy for ill-fitting dentures. A denture that fits poorly (i.e., feels loose or causes discomfort) may need to be relined or replaced as it can contribute to the development of mouth sores.
Partial dentures are a less-invasive option that also tends to be less expensive than other options for replacing missing teeth. They do require a bit of maintenance but are easy to get used to and, for many patients, do an excellent job of restoring beauty and functionality to that part of their mouth. Daily cleaning of your partial denture is vital but is a simple process that will keep your gums healthy and your partial denture looking great. Also, if future adjustments are needed – such as expanding your partial denture – DDS Dentures + Implant Solutions can take care of your needs quickly and cost-effectively.
For most cases, this office is well equipped and able to be of great benefit.  If you have a difficult case, you may need someone with a greater level of ability. I am unfortunately unable to rate this practice very high, while mine is a delicate and difficult case, I was left to find another professional to help me complete my implant process that was started with this office.
The process of fabricating a denture usually begins with an initial dental impression of the maxillary and mandibular ridges. Standard impression materials are used during the process. The initial impression is used to create a simple stone model that represents the maxillary and mandibular arches of the patient's mouth. This is not a detailed impression at this stage. Once the initial impression is taken, the stone model is used to create a 'Custom Impression Tray' which is used to take a second and much more detailed and accurate impression of the patient's maxillary and mandibular ridges. Polyvinylsiloxane impression material is one of several very accurate impression materials used when the final impression is taken of the maxillary and mandibular ridges. A wax rim is fabricated to assist the dentist or denturist in establishing the vertical dimension of occlusion. After this, a bite registration is created to marry the position of one arch to the other.
He was very good and I did not once feel the needle. Then he extracted the 7 teeth is less than 5 minutes! I was amazed at the skill he used. I had some really bad ones, that a regular dentist would not have touched, but this guy was the best... Once the teeth were out, he put in the temporary denture and had to make a couple small adjustments, because it was too tight. He used a "liquid bandage" substance over the wounds and put the denture in...
After implant-supported dentures are in place, patients should properly care for their teeth and gums. The dentures, gums, and tongue should be brushed twice a day. Patients should also floss daily to remove debris between the teeth; though false teeth won't become damaged by decay, plaque build-up can still cause gum disease and bad breath. Patients with dentures should also schedule dental visits every six months so their dentists can check the fit of the dentures and look for signs of dental problems. 
Our hope is that, regardless of your skill level when you join one of our lab teams, you will continue to grow as a dental lab professional. ADDL was founded by and is managed by dental lab technicians. What does this mean for you? Not only will you be managed by someone who has experience working in your position, you will have the opportunity to be considered for management team positions, such as on-site management and upper-management roles.

The process starts by taking a series of impressions or molds of the oral tissues that will support the denture. A dental lab will use these impressions to make models of the patient's mouth. The dentist and laboratory technician will then slowly start building the dentures on these models and transferring them to the patient's mouth at each step to ensure proper fit, establish a proper bite, and ensure that the appearance and esthetics of the denture are desirable. The patient will generally need to be seen by the dentist once per week for about 4 to 5 weeks until the denture is complete. The patient will then need to return occasionally during the first month after the denture is delivered to have adjustments made.
Been struggling with getting my dentures since June. After waiting weeks for first appointment, came back for second appointment. Was told can't complete services because location was then closing for a week because first doc was fired. Asked me to reschedule at least a week after reopening since they'd need to catch up. So I rearranged my schedule. OK. Came back yesterday, Thursday, and the girl dropped my impression on the floor right in front of me, then told me to come back at 1:00. I asked if needed to redo the impression but she just brushed it off. As soon as I was 10 miles away, I was called back to redo the impression because they needed a better one. OK. So I return and make another impression, and left with pain, bleeding, and swelling. Told to return at 1:30 to get my new teeth. OK.
More modern dentures can be fitted immediately after removal of the last tooth. They are made prior to the operation and allow the user full faculty of their mouth straight after their insertion. However, immediate dentures may lose their fit as the bones and gum shrink during the healing process. Immediate dentures are often used as a temporary solution until conventional dentures can be fitted at a later date.
The initial appointment started with a consultation. I didn't actually have anything done that day. The dentist and an assistant came in and gave me the costs as well as explained the process. They were fairly thorough and had no problems answering my questions. At this point I figured that I had maybe dodged a bullet. I was very hopeful that I was going to be one of the lucky ones.
A denturist or prosthodontist should be able to fit you with comfortable and affordable dentures to match your needs and budget. Prosthodontists receive three to four years of additional training after dental school, and specialize in cosmetic restoration and teeth replacement. Denturists, meanwhile, can take impressions of oral tissue, construct prosthetics and deliver them to patients.

The denture itself is not very good. Again, I fault this due to a low paid lab worker, who is probably texting while he makes the denture. It clearly did not fit properly, too much in one area, too little in another. I am glad that I have had a partial for years and an upper for years, as I know what can be done to alleviate the pressure points. I had to remove material in several spots on the lower edges of the denture, to keep it from bruising my gums.
In cases where teeth need to be removed, an immediate denture is typically placed to enable proper healing of the extraction sites and serve as an esthetic replacement for natural teeth. This can be easily modified for changing ridge contours during healing until final dentures can be made. In constructing the immediate dentures, dentists will use a shade and mold chart to choose replacement teeth that will most closely match your natural teeth, minimizing any changes in appearance.

Only his assistant - she did his job great. But I didn't pay her. I paid him. He nonchalantly walked down the hall not even stopping to take a look at my jawline that's showing. I love my immediate dentures. But the money I paid. I think I should have a decent dentist that is interested in helping his patient with care. My Medicaid dentist treats me better and he doesn't get paid so much.

Dr. Walton's dental center has an on-site dental lab that fabricates new dentures and provides repairs and relines, often with same-day service. He crafts single-visit crowns using the latest CAD/CAM technology to deliver a custom, natural-looking restoration. Dr. Walton has incorporated the use of Laser Technology in his practice to provide his patients with the leading edge options for surgery and periodontal treatment. Being able to provide dentures and crowns in a day is a significant advantage, especially for patients who have traveled far distances. The on-site lab also eliminates the need to use outside commercial labs, therefore helping to keep costs low.
If you decide to get a partial denture, you’ll need to visit your dentist to have metal clasps attached to your surrounding teeth and an impression made of the area your partial will fill. The impression will be sent to a dental lab, where a technician will fabricate a custom denture that includes a gum-colored base that will fit securely over your gums. A metal framework will be used to attach your new partial to the clasps on your natural teeth to ensure a secure fit.
Remember: You can do serious harm to your denture and to your health by trying to adjust or repair your denture. Using a do-it-yourself kit can damage the appliance beyond repair. Glues sold over-the-counter often contain harmful chemicals and should not be used on a denture. If your denture breaks, cracks or chips, or if one of the teeth becomes loose, call your dentist immediately. In many cases, dentists can make necessary adjustments or repairs, often on the same day. Complicated repairs may require that the denture be sent to a special dental laboratory. 
If cared for properly, dentures should last a minimum of 5 years. Over time, the bone shrinks and causes the denture to become loose. The rate that this happens varies with each individual, but can be controlled by visiting a dentist regularly to ensure that the denture is fitting properly. An ill-fitting denture causes the bone to shrink more rapidly. To prolong the life of a denture, a dentist will often use a denture liner to refit the internal surface of the denture to the oral tissues.
Powder application. Sprinkle a thin, uniform layer throughout the tissue-bearing surface of the denture. Shake off excess powder and press the denture into place. Powders may be preferred over pastes because they are easier to clean off the denture and tissue. In addition, they don't have the same tendency as pastes do to "shim" (keep the denture away from the tissue).
×