A full arch denture is a removable tooth replacement option for those who need all their teeth replaced. They can be crafted to provide the characteristics (tooth shape and color) the patient desires. Advances have been made in the materials used for dentures and in the way they are designed. If you already have dentures (partial or full arch) you may be experiencing a loose fit or denture slipping. This can lead to gum sores, can affect your chewing and your speech and decrease your confidence when speaking and/or laughing with others. We can help restore your dentures to the correct fit.
I went to Affordable Dentures 800 Black Horse Pike in Mount Ephraim NJ 08059. I was seen by one of their dental assistant. Everything went well until I got my dentures. They didn't fit right when they first put them in. They said it would be fine. A week later had to go back. Made a adjustment. Told the girl that it still wasn't fitting right. Said it will be fine. Two weeks later had to go back again. Then the fourth and fifth time. Very unhappy with the staff. They were making my dentures worse. I would not recommend this company. Save your money and go to a experience dentist. After a year of living with these dentures that didn't fit I went to real dentist. They were surprise to see how bad the dentures were made.
They deserve ten stars. Took my elderly blind neighbor to Bright Now dental and waited over an hour and a half past our appt time. Was so angry we walked out and didn't know what to do so we found Dental Works in the same mall. We had no appt but they fit us right in. They were wonderful. Had to have 12 teeth pulled and now onto dentures. All the women that work there are very friendly and caring. Dr Chi was great and very gentle on a poor lady who was scared to death. Would highly recommend them and their price was the best too!!!!! More
Wooden full dentures were invented in Japan around the early 16th century.[6] Softened bees wax was inserted into the patient's mouth to create an impression, which was then filled with harder bees wax. Wooden dentures were then meticulously carved based on that model. The earliest of these dentures were entirely wooden, but later versions used natural human teeth or sculpted pagodite, ivory, or animal horn for the teeth. These dentures were built with a broad base, exploiting the principles of adhesion to stay in place. This was an advanced technique for the era; it would not be replicated in the West until the late 18th century. Wooden dentures continued to be used in Japan until the Opening of Japan to the West in the 19th century.[6]
The discount program provides access to the Aetna Dental Access® network. This network is administered by Aetna Life Insurance Company (ALIC). Neither ALIC nor any of its affiliates offers or administers the discount program. Neither ALIC nor any of its affiliates is an affiliate, agent, representative or employee of the discount program. Dental providers are independent contractors and not employees or agents of ALIC or its affiliates. ALIC does not provide dental care or treatment and is not responsible for outcomes.
When you see these low costs advertised, it is almost always a "bait and switch." With dentures, you get about what you pay for, but rarely would you find even average quality for $399-$599 and that is for each, not both. Since well-fitting dentures are essential for good health, to say nothing of cosmetics, one should not consider price alone. Low cost dentures use cheap and "soft" teeth that wear rapidly and look fake, while higher quality teeth last for many years. The pink denture base made of cheap material discolors, breaks easily and usually fits poorly. I would advise that, as with hand grenades and parachutes, don't always look for the lowest cost.
Fifty-four complete-denture wearers were interviewed one year after they had been fitted with the dentures. Their opinions and reactions were noted and the answers given to standard questions were analysed for inter-correlations and for correlations with findings in earlier series of clinical and roentgenological investigations. Most of the patients were satisfied with the fit, aesthetic effect of the denture and ability to chew and speak. Many of the patients reported oral parafunctions. Roughly every fourth patient used sedatives because they felt restless and nervous.
I had a really great experience with Affordable Dentures and Implants. My mom has always been afraid of dentists and didn't take care of her teeth. She also had a stroke a few years back which has created a few more barriers to treatment. It's difficult to explain to anyone who doesn't personally know a stroke survivor, but she gets antsy pretty quickly and can be a bit difficult to work with at times. She's also physically handicapped and can't use her left side, plus is having trouble transferring from her wheelchair to other seats, getting into a helpful position, and following directions, so it's a bit of a unique situation. She underwent major oral surgery in this office- multiple extractions and bone augmentation- in order to get dentures. This is something we've seen a couple different dentists for, but she has always refused treatment because she didn't like something about the office or wanted to be put to sleep in a hospital, which was out of our budget. Given her limitations and dental anxiety, I wasn't sure what to expect this time around, but I couldn't have been happier with how this office behaved. The front office has been great in terms of explaining processes, scheduling, and billing. I've also had to coordinate paratransit to get my mom to the office, and they've worked with me on times to make sure everything lines up right. Something you can probably only appreciate if you've been in a similar situation. They've also worked with us on fixing issues and missed appointments due to unforeseeable circumstances. Not only did they not scold us for missing an appointment, but they worked with me to resolve the problem that caused it- my mom's assisted living facility biffed it and didn't give her pain medicine after her surgery. :/ But, like I said, this office came through and helped- always making her care the top priority. As far as back office goes, Carlos the assistant has the patience of a saint. Seriously. We had to do a full series of x-rays because my mom couldn't stand up for the pano. My mom had trouble holding still and repeatedly failed to follow instructions. Carlos never stopped smiling and encouraging her. He had a lot of positive energy and kept joking with her throughout, which I know went a long way to making her feel good about the office. He did the same during the other visits, but the x-rays I'm sure were the biggest challenge. Jennifer assisted with the surgery. She was incredibly kind, gentle, and thoughtful. She was always doing what she could to keep my mom comfortable and looking out for her. She even went and grabbed my mom a pillow to make sure she was comfortable. Dr. Athari has an amazing sense of calm about him. He walked us through everything and talked to us throughout the procedure. My mom needed frequent breaks during the surgery and he always gave her the time she needed to regroup. He was very gentle and mindful with her throughout the procedure, and I'm certain that's what got my mom through it without issue. I cannot stress how difficult this process could have been considering the amount of care needed and the limitations of the patient. However, these folks rolled with everything we threw at them and never missed a beat. Always helpful, knowledgeable, kind, and gentle. If I had to find one negative about the office, it would be the wait times. On our first visit, one woman in the waiting room said she'd been waiting 30+ minutes. It took a day to get a call back to schedule. We waited a little while in the office too. However, when you consider that they're working with people like the person I brought in, and that it's totally impossible to predict the needs and behaviors of some of the patients who go in there, it's totally understandable. I have no doubt they took a little longer because they were treating someone else exactly as they treated us- with patience and understanding. That's worth waiting for. So, if you do go, be prepared for some short delays, but also know why those delays happen. Overall, they work like a well-oiled machine. We got to meet the whole team, including their on-site lab techs. Every single person met us with a smile and kind words. I cannot thank Dr. Athari enough for creating an environment like this. Before I close, I'd like to add a word on fees as well. I almost hesitate to call this an affordable dental office, simply because they obviously put care first. All dental offices should do what this office does and provide options, but few do. It's that commitment to patient care and letting you choose what's right for you that makes them more affordable, versus the offices that cut corners to save you a buck. That's a major difference worth noting. They also have an on-site lab, which saves costs as well. Anyway, again, sending a huge thank-you to Dr. Athari and his staff. You guys are beyond awesome.
Retention is the principle that describes how well the denture is prevented from moving vertically in the opposite direction of insertion. The better the topographical mimicry of the intaglio (interior) surface of the denture base to the surface of the underlying mucosa, the better the retention will be (in removable partial dentures, the clasps are a major provider of retention), as surface tension, suction and friction will aid in keeping the denture base from breaking intimate contact with the mucosal surface. It is important to note that the most critical element in the retentive design of a maxillary complete denture is a complete and total border seal (complete peripheral seal) in order to achieve 'suction'. The border seal is composed of the edges of the anterior and lateral aspects and the posterior palatal seal. The posterior palatal seal design is accomplished by covering the entire hard palate and extending not beyond the soft palate and ending 1–2 mm from the vibrating line.
Immediate Dentures: These are usually a temporary means of helping you transition to successful denture wearing. Because of the muscular readjustment required, as well as the natural shrinkage of gums, the dentures which are placed immediately after tooth extraction won't fit as well as permanent dentures made when the healing is complete. They do, however, provide you with new teeth right away, and give you time to adjust.
The fabrication of a set of complete dentures is a challenge for any dentist/denturist. There are many axioms in the production of dentures that must be understood; ignorance of one axiom can lead to failure of the denture. In the vast majority of cases, complete dentures should be comfortable soon after insertion, although almost always at least two adjustment visits are necessary to remove the cause of sore spots. One of the most critical aspects of dentures is that the impression of the denture must be perfectly made and used with perfect technique to make an accurate model of the patient's edentulous (toothless) gums. The dentist or denturist must use a process called border molding to ensure that the denture flanges are properly extended. An array of problems may occur if the final impression of the denture is not made properly. It takes considerable patience and experience for a dentist to know how to make a denture, and for this reason it may be in the patient's best interest to seek a specialist, either a prosthodontist or denturist, to make the denture. A denturist is a trained and licensed professional who sees patients in need of dentures, partials, relines or repairs. A denturist not only takes the impression, but makes the entire denture in his or her own laboratory. The denturist then schedules a date for the delivery of the finished dentures to the patient. A general dentist may do a good job making dentures, but only if he or she is meticulous and experienced. Many dentists no longer make dentures themselves. but instead take an impression of the patients' mouth and then either send the impressions to a dental laboratory, which could be anywhere in the world, or send the patient to a denturist. Once the laboratory receives dental impressions of the patient's mouth, the laboratory creates plaster molds from them. The laboratory uses the molds to create the wax rims used to register the patient's bite. These wax rims are returned to the dentist, who uses them to register the patient's bite. The dentist may assist the patient in choosing the correct size of teeth for the dentures, or simply make the selection himself. Once bite registration is completed and the teeth are selected for the dentures, the wax rim is usually returned to the dental laboratory in order to have the denture teeth set into the wax. Once the teeth are set into the wax rim, the result is a prefinished denture that looks almost like the finished product. This prefinished denture is usually returned to the dentist's office and the patient usually has a chance to approve the setup (for immediate or standard dentures) or to try the denture before it is finished. After approval by the patient, the dentist returns the pre-denture to the laboratory for final processing. The finished denture is then returned to the dentist's office for delivery to the patient.
Dentures do not function like natural teeth. It takes time to learn how to properly use dentures. Food must be cut up into small pieces and be placed on the back teeth on both sides to balance chewing. Denture chewing occurs up and down bilaterally, not on one side. One sided chewing will cause the dentures to dislodge. Biting with the front denture teeth will cause the back of the dentures to dislodge. Dentures only function properly when force is applied evenly over the entire chewing surface of the back teeth.
New dentures may feel a little odd or loose for a few weeks until the muscles of the cheeks and tongue learn to keep them in place and you get comfortable inserting and removing them. Also, it is not unusual for minor irritation or soreness to occur and for saliva flow to increase when you first start wearing dentures, but these problems will diminish as the mouth adjusts.
The process of fabricating a denture usually begins with an initial dental impression of the maxillary and mandibular ridges. Standard impression materials are used during the process. The initial impression is used to create a simple stone model that represents the maxillary and mandibular arches of the patient's mouth. This is not a detailed impression at this stage. Once the initial impression is taken, the stone model is used to create a 'Custom Impression Tray' which is used to take a second and much more detailed and accurate impression of the patient's maxillary and mandibular ridges. Polyvinylsiloxane impression material is one of several very accurate impression materials used when the final impression is taken of the maxillary and mandibular ridges. A wax rim is fabricated to assist the dentist or denturist in establishing the vertical dimension of occlusion. After this, a bite registration is created to marry the position of one arch to the other.
Once the relative position of each arch to the other is known, the wax rim can be used as a base to place the selected denture teeth in correct position. This arrangement of teeth is tested in the mouth so that adjustments can be made to the occlusion. After the occlusion has been verified by the dentist or denturist and the patient, and all phonetic requirements are met, the denture is processed.
Dental implants are a permanent alternative to partial dentures and bring additional benefits that dentures cannot provide and will outlast normal dentures even under optimal conditions. Dental implants will actually replace the entire tooth (the tooth root as well as the crown) which eliminates bone deterioration and brings the same strength and durability as your original tooth.
To clean your dentures, take them out of your mouth and run clean water over them to dislodge any food particles that may be stuck between teeth, along the gum line, or underneath the structure. Then brush the dentures all over with a denture brush or very soft toothbrush using a mild soap or denture cleaner. Be sure not to use any other cleaners, regular toothpaste, or electric toothbrushes as these are all too abrasive and can damage and wear away the denture materials. After cleaning, make sure to rinse them well.
Teeth can fall out for a number of reasons, ranging from genetics to drug abuse. Most commonly, teeth are removed or fall out on their own due to severe tooth decay. Neglect to upkeep oral hygiene or not seeking proper treatment for damaged teeth, can lead to the onset of decay which in turn leads to loss of teeth. Visiting you dentist in 6 month intervals is a good preventive measure to spot any early signs of decay.
