Went in today for some x-rays and a cleaning and Dr Athari & the staff were great! Dr Athari did a great job & I left feeling my teeth were cleaner & healthier! Also, glad that he motivated me to start flossing more so I can maintain my healthy teeth and gums! I knew that flossing was important but did you know that increased your life by 6 years!!It helped that he was very outgoing and had a great personality, I will definitely be back and I will be referring people to come here! Very honest, very fast and efficient!!
Wooden full dentures were invented in Japan around the early 16th century.[6] Softened bees wax was inserted into the patient's mouth to create an impression, which was then filled with harder bees wax. Wooden dentures were then meticulously carved based on that model. The earliest of these dentures were entirely wooden, but later versions used natural human teeth or sculpted pagodite, ivory, or animal horn for the teeth. These dentures were built with a broad base, exploiting the principles of adhesion to stay in place. This was an advanced technique for the era; it would not be replicated in the West until the late 18th century. Wooden dentures continued to be used in Japan until the Opening of Japan to the West in the 19th century.[6]
Implants: An implant is a metal post that is inserted into the bone of the upper or lower jaw. This post is then used to replace a single tooth by attaching a crown to it, or multiple teeth by attaching a bridge to multiple implants. Implants are the most expensive option for tooth replacement, but implants simulate natural teeth better than any of the other options.
Two to six dental implants that support a removable denture plate can cost $3,500-$30,000 or more depending on the number and type of implants (mini-implants are less expensive), denture materials (in some cases an existing denture plate can be adapted for use with implants) and any other procedures needed. A full set (upper and lower) of implants and dentures can cost $7,000-$90,000 or more.

I will be having Dr. Athari do my 7th dental implant.  I have had 6 implants done at various locations ... family dentist, oral surgeon, and local dental school over the past 7 years.   I was impressed with the clean modern office, friendly professional staff, and the price.  Dr. Athari and his assistant made me feel relaxed and comfortable.  They presented and explained to me a couple of treatment plans along with the pros and cons of each ... I chose to have another implant.  I am confident that Dr. Athari and his staff will make my tooth beautiful and functional again.

They do not use insurance, so don't ask. It's cash or credit card up front. I paid $1,330.00 for 7 extractions, a temporary denture till I heal and a permanent denture within a year. I know first hand that going the other way with a super good dentist, would have resulted in an Oral Surgeon, a Dentist and an expensive Denture Lab. It would have cost me over $5,000 if I had gone the best way... I made an appointment for a week later, to have the teeth removed and before that I went one morning to have my form made, so the temporary denture could be ready for the extraction day... The following lines are my thoughts about the people there...

Over a period of time, your denture will need to be relined, remade, or rebased due to normal wear. Rebasing means making a new base while keeping the existing denture teeth. Also, as you age, your mouth naturally changes. These changes cause your dentures to loosen, making chewing difficult and irritating your gums. At a minimum, you should see your dentist annually for a checkup.

Dr. Shiel received a Bachelor of Science degree with honors from the University of Notre Dame. There he was involved in research in radiation biology and received the Huisking Scholarship. After graduating from St. Louis University School of Medicine, he completed his Internal Medicine residency and Rheumatology fellowship at the University of California, Irvine. He is board-certified in Internal Medicine and Rheumatology.

First of all the facility is not equipped properly, during service you have to spit into a plastic cup which is completely ridiculous. Secondly, they make you wait 9 months instead of 7 to heal your gum after pulling out original teeth. Final product (ultimate fit) break after 2 months in the mouth while eating pasta. Low quality material!!! Fighting to get our money back. :((

There are some other kinds of full and partial dentures that differ from traditional permanent dentures including a type called immediate dentures. These dentures are created before the teeth that are being replaced with dentures have been removed and are used immediately after tooth extraction and during the healing process, which can be up to six months long. These dentures can be more easily refitted than permanent dentures to accommodate for mouth changes as the swelling in the gums and jaw subsides while healing. The immediate dentures will be disposed of once the healing process is complete and your mouth is ready for permanent dentures.
It takes practice to put in and take out a removable partial denture. It may feel a bit odd or tight for the first few weeks. But in time, you should get used to it. Never force the denture into place by biting down. This could bend or break the clasps or damage your teeth. If you have a problem with your new partial denture, talk with your dentist.
Denture adhesives, also called denture adherents, are creams, powders, wafers or strips that are used to hold dentures firmly in place. The adhesive also helps form a seal that keeps food particles from sticking between the dentures and gums. Adhesive is applied to clean dentures, which are then positioned in the mouth and held in place for a few seconds, according to the manufacturer’s instructions.
Retention is the principle that describes how well the denture is prevented from moving vertically in the opposite direction of insertion. The better the topographical mimicry of the intaglio (interior) surface of the denture base to the surface of the underlying mucosa, the better the retention will be (in removable partial dentures, the clasps are a major provider of retention), as surface tension, suction and friction will aid in keeping the denture base from breaking intimate contact with the mucosal surface. It is important to note that the most critical element in the retentive design of a maxillary complete denture is a complete and total border seal (complete peripheral seal) in order to achieve 'suction'. The border seal is composed of the edges of the anterior and lateral aspects and the posterior palatal seal. The posterior palatal seal design is accomplished by covering the entire hard palate and extending not beyond the soft palate and ending 1–2 mm from the vibrating line.

Dr. Shiel received a Bachelor of Science degree with honors from the University of Notre Dame. There he was involved in research in radiation biology and received the Huisking Scholarship. After graduating from St. Louis University School of Medicine, he completed his Internal Medicine residency and Rheumatology fellowship at the University of California, Irvine. He is board-certified in Internal Medicine and Rheumatology.

The process of getting dentures requires several appointments, usually over a period of several weeks.  Highly accurate impressions (molds) and measurements are taken and used to create your custom denture.  Several “try-in” appointments may be necessary to ensure proper shape, color, and fit.  At the final appointment, your dentist will precisely adjust and place the completed denture, ensuring a natural and comfortable fit.

Acrylic partial dentures are more affordable, but they tend to feel more bulky. This partial has an acrylic base into which the denture teeth are set and is attached to your natural teeth with small metal clasps. The acrylic partial may be available with more durable, natural-looking teeth. The practice staff can inform you of availability in each office.
This is my third time taking my grandpa to this establishment. Every time our “appointment” is never when we go back. We have to wait almost 3 hours to even get to the back. When I asked someone at the desk how long it would be they said “you are next to go back” that was almost an hour ago, and more than 7 people have went in before us. If you make an appointment you should not have to wait 3 hours for someone who has not made an appointment.

If you are in need of replacing an entire arch of teeth, a full arch denture is going to be the most affordable tooth-replacement option. Additionally, not having any teeth causes mild to severe physical changes in your face mouth and lips. A full arch denture can restore some biting and chewing functionality and bring back a more attractive appearance.


Overdentures are an alternative that can be used if traditional dentures prove to be extremely uncomfortable or if you have a few natural teeth left. Overdentures are fitted over the roots of natural teeth and either rest on these or on dental implants, if there are no natural teeth to fit over. Some find this type of denture more comfortable and they are also easily removable.
Multiple "attempts" to correct issues, everyone has failed. Told to do one-thing by corp. Then does what they want. Never gets any better. Only worse. I have been trying for years now to get my dentures to fit and sit properly. I have no idea why they keep fixing broken dentures time and time again. When I first transferred my account from Fresno CA to Tulsa OK for my implants that was a whole ordeal itself with one Dr not wanting to release the funds to the new office, not helping by talking to the Fresno Dr directly only through email. But eventually it was done and started all the issues.
The fabrication of a set of complete dentures is a challenge for any dentist/denturist. There are many axioms in the production of dentures that must be understood; ignorance of one axiom can lead to failure of the denture. In the vast majority of cases, complete dentures should be comfortable soon after insertion, although almost always at least two adjustment visits are necessary to remove the cause of sore spots. One of the most critical aspects of dentures is that the impression of the denture must be perfectly made and used with perfect technique to make an accurate model of the patient's edentulous (toothless) gums. The dentist or denturist must use a process called border molding to ensure that the denture flanges are properly extended. An array of problems may occur if the final impression of the denture is not made properly. It takes considerable patience and experience for a dentist to know how to make a denture, and for this reason it may be in the patient's best interest to seek a specialist, either a prosthodontist or denturist, to make the denture. A denturist is a trained and licensed professional who sees patients in need of dentures, partials, relines or repairs. A denturist not only takes the impression, but makes the entire denture in his or her own laboratory. The denturist then schedules a date for the delivery of the finished dentures to the patient. A general dentist may do a good job making dentures, but only if he or she is meticulous and experienced. Many dentists no longer make dentures themselves. but instead take an impression of the patients' mouth and then either send the impressions to a dental laboratory, which could be anywhere in the world, or send the patient to a denturist. Once the laboratory receives dental impressions of the patient's mouth, the laboratory creates plaster molds from them. The laboratory uses the molds to create the wax rims used to register the patient's bite. These wax rims are returned to the dentist, who uses them to register the patient's bite. The dentist may assist the patient in choosing the correct size of teeth for the dentures, or simply make the selection himself. Once bite registration is completed and the teeth are selected for the dentures, the wax rim is usually returned to the dental laboratory in order to have the denture teeth set into the wax. Once the teeth are set into the wax rim, the result is a prefinished denture that looks almost like the finished product. This prefinished denture is usually returned to the dentist's office and the patient usually has a chance to approve the setup (for immediate or standard dentures) or to try the denture before it is finished. After approval by the patient, the dentist returns the pre-denture to the laboratory for final processing. The finished denture is then returned to the dentist's office for delivery to the patient.

An immediate full denture is inserted immediately after the remaining teeth are removed. (Your dentist takes measurements and makes models of your jaw during a prior visit.) While immediate dentures offer the benefit of never having to be without your teeth, they must be relined several months after being inserted. The reason is that the bone supporting the teeth reshapes as it heals, causing the denture to become loose.
×