Dental implants are a permanent alternative to partial dentures and bring additional benefits that dentures cannot provide and will outlast normal dentures even under optimal conditions. Dental implants will actually replace the entire tooth (the tooth root as well as the crown) which eliminates bone deterioration and brings the same strength and durability as your original tooth.

I have had to go back a couple times to see Christopher Atari and his team they are so wonderful… I have had to go back a couple times to see Christopher Atari and his team they are so wonderful everyone on his staff make you feel like you're at home not at a dentist I cannot tell you how wonderful they are there are not words out there for this dental office if you need help you must go here everyone there everyone are so so kind and make you feel comfortable and most of all nothing to be ashamed of. I actually can't wait till my next visit he says it about a dentist no one that's how good they are. I thank you all from the bottom of my heart for your kindness and for making me so happy. And my great big smile. I can't quit smiling thank you thank you thank you. Anyone who's reading this this is the place to go. God bless every single one of you sincerely Toni Barajas Read more


The fabrication of a set of complete dentures is a challenge for any dentist/denturist. There are many axioms in the production of dentures that must be understood; ignorance of one axiom can lead to failure of the denture. In the vast majority of cases, complete dentures should be comfortable soon after insertion, although almost always at least two adjustment visits are necessary to remove the cause of sore spots. One of the most critical aspects of dentures is that the impression of the denture must be perfectly made and used with perfect technique to make an accurate model of the patient's edentulous (toothless) gums. The dentist or denturist must use a process called border molding to ensure that the denture flanges are properly extended. An array of problems may occur if the final impression of the denture is not made properly. It takes considerable patience and experience for a dentist to know how to make a denture, and for this reason it may be in the patient's best interest to seek a specialist, either a prosthodontist or denturist, to make the denture. A denturist is a trained and licensed professional who sees patients in need of dentures, partials, relines or repairs. A denturist not only takes the impression, but makes the entire denture in his or her own laboratory. The denturist then schedules a date for the delivery of the finished dentures to the patient. A general dentist may do a good job making dentures, but only if he or she is meticulous and experienced. Many dentists no longer make dentures themselves. but instead take an impression of the patients' mouth and then either send the impressions to a dental laboratory, which could be anywhere in the world, or send the patient to a denturist. Once the laboratory receives dental impressions of the patient's mouth, the laboratory creates plaster molds from them. The laboratory uses the molds to create the wax rims used to register the patient's bite. These wax rims are returned to the dentist, who uses them to register the patient's bite. The dentist may assist the patient in choosing the correct size of teeth for the dentures, or simply make the selection himself. Once bite registration is completed and the teeth are selected for the dentures, the wax rim is usually returned to the dental laboratory in order to have the denture teeth set into the wax. Once the teeth are set into the wax rim, the result is a prefinished denture that looks almost like the finished product. This prefinished denture is usually returned to the dentist's office and the patient usually has a chance to approve the setup (for immediate or standard dentures) or to try the denture before it is finished. After approval by the patient, the dentist returns the pre-denture to the laboratory for final processing. The finished denture is then returned to the dentist's office for delivery to the patient.
Denture Materials – Your dentures can be made from acrylic, nylon polymer, or cobalt metal. Each material offers its own distinct set of benefits and factors into the price you pay for your dentures. Metal, for instance, is more costly because it’s difficult to break, while denture plates made from acrylic resin are less expensive, more flexible, and can be tinted to match your natural gum line.
I went to Affordable Dentures & Implants on 1/4/17 to get a full set of dentures.  Before I went I, I had watched youtube videos to see the issues and complaints that people had about wearing dentures.  I was surprised that Dr. Athari immediately addressed the same issues.  The first thing he said to me was, " Dentures are not fun".  I appreciated the honesty but still wanted them.  So he suggested that I get dentures on the top and then wait and or save up to get implants on the bottom.  This was to avoid the problem that most people have with the dentures on the bottom moving so much.  I was curious about how much that would be so the administrative assistant typed up and printed out a detailed treatment plan.  After she informed me that the total cost wasn't due up front, I realized that it was doable.  I just got my upper dentures done today and I am really pleased.  I can't wait to get my implants.  Thank you Dr. Athari.
The care I received at this dentist office was outstanding! Everyone in the office was very friendly and professional, and explained everything to me including what I would have to pay after insurance, they left no question unanswered. The dentist that performed the procedure did so with speed and care, I was in an out and recovered quickly with little pain. I even recommend this office to a coworker that is looking for a dentist. My visit was so pleasant I look forward to coming back. Thank you for your excellent service!

Dentures are just one option for replacing missing teeth; some of the others include fixed bridgework and dental implants. Each method has its particular pluses and minuses, which should be carefully considered. There are also several varieties of dentures available to address specific issues, from partial dentures to implant-supported overdentures. The best option for you will depend on your individual situation.
Extractions were the main cost saver ($30 each) but you have to pay for the dentures first ($500). Don't think they would have accepted me if I only wanted extractions. TOOK 5 MONTHS and 6 or 7 visits to get these "immediate" dentures. Look good out of my mouth but when I smile u see all the bottom teeth and hardly any top ones. LOTS of overbite make biting PB&J sandwich impossible.

I hate my dentures!!! I paid over $2000 for the ultimate denture, at the wax try in everything was fine. I had no problem with the dentures and I was told the gum on the denture would be a little dark as the wax was a bright pink color. I picked my permanent denture up a week later and the gums on the denture are black! I don't know if they feel all black people have black gums however, my real gums are not dark to start with. I asked what the cost would be to get the gums on the denture lightened and I was told they would have to be re-made. I paid over $2000 and now it sounds like the only way to get the dentures done right I would have to purchase a new pair. THIS IS VERY DISAPPOINTING! I cannot believe I recommended this place to people. I feel like I flushed $2000 down the toilet! I am currently wearing my immediate dentures (cheap economy dentures) I received after surgery and they look better than my permanent dentures (expensive ultimate dentures). My advise to everyone is to not sign anything until you know for certain what the end result is. They only focus on how short or long you want the teeth, no one says anything about how the gums attached to the teeth are going to look. I feel if you pay that kind of money they should be done right!
They do not use insurance, so don't ask. It's cash or credit card up front. I paid $1,330.00 for 7 extractions, a temporary denture till I heal and a permanent denture within a year. I know first hand that going the other way with a super good dentist, would have resulted in an Oral Surgeon, a Dentist and an expensive Denture Lab. It would have cost me over $5,000 if I had gone the best way... I made an appointment for a week later, to have the teeth removed and before that I went one morning to have my form made, so the temporary denture could be ready for the extraction day... The following lines are my thoughts about the people there...
Removable partial dentures. Although these don't require grinding down adjacent teeth, they are not nearly as stable or comfortable as dental implants and can affect speech and eating. This type of restoration is less expensive but doesn’t look as natural or function as well as an implant-supported crowns. The bone underneath a removable partial denture may deteriorate over time, changing the appearance of your smile and face.
I began to get suspicious when they refused to pull my teeth unless I agreed to buy their most expensive package. Being in a dire financial situation I really didn't have much a choice. The most expensive package isn't what I wanted but it was still far cheaper than getting work done elsewhere. I agreed and signed the necessary paperwork. My next appointment was going to be about a week later.
Dentures are generally worn during the day and taken out at night to give the oral tissues time to relax. During the first few days after receiving the denture, however, it needs to remain in the mouth even when sleeping to best identify areas that need to be adjusted. This is especially important after receiving an immediate denture, for the gum tissues will swell after the teeth are extracted or lost and then may not permit the denture to be reinserted if taken out.
Complete dentures are made when gums are restored to a healthy condition and sufficient time has passed for healing. Complete dentures replace all teeth in the upper or lower jaws of the mouth. Gums will naturally shrink through the healing process of tooth loss, which normally takes from six to 12 months. During this period the immediate dentures may require adjustments to accommodate the changes in the gums and underlying bone structure. This could include soft and hard relining procedures.
Paste application. Apply this denture adhesive to a dry or preferably wet denture. Avoid placing adhesive close to the denture borders. If the adhesive oozes, use less of the product. For dentures on the upper jaw, apply three short strips of adhesive -- or a series of small dots -- along the ridge area and one down the center. For dentures on the lower jaw, apply three short strips of adhesive -- or a series of small dots -- in the center of the ridge area.
I hate my dentures!!! I paid over $2000 for the ultimate denture, at the wax try in everything was fine. I had no problem with the dentures and I was told the gum on the denture would be a little dark as the wax was a bright pink color. I picked my permanent denture up a week later and the gums on the denture are black! I don't know if they feel all black people have black gums however, my real gums are not dark to start with. I asked what the cost would be to get the gums on the denture lightened and I was told they would have to be re-made. I paid over $2000 and now it sounds like the only way to get the dentures done right I would have to purchase a new pair. THIS IS VERY DISAPPOINTING! I cannot believe I recommended this place to people. I feel like I flushed $2000 down the toilet! I am currently wearing my immediate dentures (cheap economy dentures) I received after surgery and they look better than my permanent dentures (expensive ultimate dentures). My advise to everyone is to not sign anything until you know for certain what the end result is. They only focus on how short or long you want the teeth, no one says anything about how the gums attached to the teeth are going to look. I feel if you pay that kind of money they should be done right!

The process starts by taking a series of impressions or molds of the oral tissues that will support the denture. A dental lab will use these impressions to make models of the patient's mouth. The dentist and laboratory technician will then slowly start building the dentures on these models and transferring them to the patient's mouth at each step to ensure proper fit, establish a proper bite, and ensure that the appearance and esthetics of the denture are desirable. The patient will generally need to be seen by the dentist once per week for about 4 to 5 weeks until the denture is complete. The patient will then need to return occasionally during the first month after the denture is delivered to have adjustments made.
We continue to invest in our dental lab technicians by providing opportunities to advance their technical and professional skill sets. Our technicians receive assistance with continuing education, work with cutting-edge technology, and learn innovative techniques, including advanced implant prosthetic-restoration training. Our technicians also receive professional recognition within the field of dental lab technology, such as becoming a Certified Dental Lab Technician.
If I had to find one negative about the office, it would be the wait times. On our first visit, one woman in the waiting room said she'd been waiting 30+ minutes. It took a day to get a call back to schedule. We waited a little while in the office too. However, when you consider that they're working with people like the person I brought in, and that it's totally impossible to predict the needs and behaviors of some of the patients who go in there, it's totally understandable. I have no doubt they took a little longer because they were treating someone else exactly as they treated us- with patience and understanding. That's worth waiting for. So, if you do go, be prepared for some short delays, but also know why those delays happen. Overall, they work like a well-oiled machine. We got to meet the whole team, including their on-site lab techs. Every single person met us with a smile and kind words. I cannot thank Dr. Athari enough for creating an environment like this.
Web Privacy | Links from websites affiliated with UT Health's website (uthscsa.edu) to other websites do not constitute or imply university endorsement of those sites, their content, or products and services associated with those sites. The content on this website is intended to be used for informational purposes only. Health information on this site is not meant to be used to diagnose or treat conditions. Consult a health care provider if you are in need of treatment.

When I arrived for my appointment, they said I did not have an appointment and they had no fax from a doctor. They did tell me that they would fit me in but later they acted as though I was telling them a lie, or that I called a different office which according to my cellphone, I had the correct place. The dentist talked to me like I was dirt. I was just trying to tell him that I had this conversation with the lady at that office and then I heard the woman's voice and recognized it as the lady that I spoke with on the phone. I did point at her and say that it was her that I had talked to and she yelled at me not to point at her.

Remember: You can do serious harm to your denture and to your health by trying to adjust or repair your denture. Using a do-it-yourself kit can damage the appliance beyond repair. Glues sold over-the-counter often contain harmful chemicals and should not be used on a denture. If your denture breaks, cracks or chips, or if one of the teeth becomes loose, call your dentist immediately. In many cases, dentists can make necessary adjustments or repairs, often on the same day. Complicated repairs may require that the denture be sent to a special dental laboratory. 
The fabrication of a set of complete dentures is a challenge for any dentist/denturist. There are many axioms in the production of dentures that must be understood; ignorance of one axiom can lead to failure of the denture. In the vast majority of cases, complete dentures should be comfortable soon after insertion, although almost always at least two adjustment visits are necessary to remove the cause of sore spots. One of the most critical aspects of dentures is that the impression of the denture must be perfectly made and used with perfect technique to make an accurate model of the patient's edentulous (toothless) gums. The dentist or denturist must use a process called border molding to ensure that the denture flanges are properly extended. An array of problems may occur if the final impression of the denture is not made properly. It takes considerable patience and experience for a dentist to know how to make a denture, and for this reason it may be in the patient's best interest to seek a specialist, either a prosthodontist or denturist, to make the denture. A denturist is a trained and licensed professional who sees patients in need of dentures, partials, relines or repairs. A denturist not only takes the impression, but makes the entire denture in his or her own laboratory. The denturist then schedules a date for the delivery of the finished dentures to the patient. A general dentist may do a good job making dentures, but only if he or she is meticulous and experienced. Many dentists no longer make dentures themselves. but instead take an impression of the patients' mouth and then either send the impressions to a dental laboratory, which could be anywhere in the world, or send the patient to a denturist. Once the laboratory receives dental impressions of the patient's mouth, the laboratory creates plaster molds from them. The laboratory uses the molds to create the wax rims used to register the patient's bite. These wax rims are returned to the dentist, who uses them to register the patient's bite. The dentist may assist the patient in choosing the correct size of teeth for the dentures, or simply make the selection himself. Once bite registration is completed and the teeth are selected for the dentures, the wax rim is usually returned to the dental laboratory in order to have the denture teeth set into the wax. Once the teeth are set into the wax rim, the result is a prefinished denture that looks almost like the finished product. This prefinished denture is usually returned to the dentist's office and the patient usually has a chance to approve the setup (for immediate or standard dentures) or to try the denture before it is finished. After approval by the patient, the dentist returns the pre-denture to the laboratory for final processing. The finished denture is then returned to the dentist's office for delivery to the patient.
CEDAR RAPIDS, IOWA -- I had a great experience there, and I'd recommend them to anyone. I had 22 teeth extracted and immediate dentures placed all in the same day. The dentist there is a fireball and I really liked her. I liked all the staff really. In the morning they took the impressions and then sent me out to lunch with prescriptions to fill. A mild sedative, pain pills, and antibiotics. They told me to come back at 2 pm, take the sedative in the waiting room, and wait to be called. When I went back there, they had me take the first pain pill and then numbed me up and began the process. Wow.
An immediate full denture is inserted immediately after the remaining teeth are removed. (Your dentist takes measurements and makes models of your jaw during a prior visit.) While immediate dentures offer the benefit of never having to be without your teeth, they must be relined several months after being inserted. The reason is that the bone supporting the teeth reshapes as it heals, causing the denture to become loose.
×