While we strive to offer the highest quality of care possible, we know that a person who can’t afford treatment is not going to come in, regardless of how great a job we do. That is why we work with our patients as much as we possibly can. We want to make sure that they get the care they need and that they get it a price they can afford. To that end, we offer significant discounts over other care providers. Additionally, we are always happy to help set up a flexible financing program with our clients.
Review: My own experience with Todd Young has been that he does care about results and about how his work affects me as a patient. I have some pre-existing medical conditions that made fitting me with dentures very challenging and Todd has shown himself to be a perfectionist in his effort to get my dentures ”just right” and working for me. He and his staff have explained every step of the process and answered any questions I’ve had. In addition, I’ve seen Todd go above and beyond what I had expected, especially in terms of dealing with a difficult surgery I’d undergone at another dental practice — he did his best to correct a situation that he had nothing to do with creating! I wasn’t expecting that kind of support and both my wife and I are very grateful to Todd for his help. And his staff are certainly friendly and courteous. It’s hard for me to believe that the negative reviews posted here aren’t just from someone who has to have some complaint about anything and everything. I can say that in the many visits I’ve made to Todd because of my special fitting needs, I have never heard another customer complain about ANYTHING they experienced with Todd and his staff.
Went in today for some x-rays and a cleaning and Dr Athari & the staff were great! Dr Athari did a great job & I left feeling my teeth were cleaner & healthier! Also, glad that he motivated me to start flossing more so I can maintain my healthy teeth and gums! I knew that flossing was important but did you know that increased your life by 6 years!!It helped that he was very outgoing and had a great personality, I will definitely be back and I will be referring people to come here! Very honest, very fast and efficient!!
Dr. Steve Horne began his career at Brigham Young University obtaining his BA in English. He earned his doctorate of dental surgery in 2007 from the University of Southern California where his pursuit for academic excellence landed him on the dean's list. He was recognized for his superior clinical skills and invited to help teach other dental students in courses on restorative dentistry, prosthodontics, and tooth anatomy. During dental school, he provided dental care for underserved populations of Los Angeles and Orange County, Mexico, and Costa Rica with the international volunteer organization AYUDA. After graduation from USC, Dr. Horne entered active duty with the U.S. Army and practiced dentistry at Fort Knox, Kentucky, for four years. During this time, in 2010, he was deployed as part of a medical unit to Baghdad, Iraq, to provide dental and triage support to military and civilian workers who were involved in the effort there. During his military service, he received multiple Army Achievement Medals, the Army Commendation Medal, and served as company commander. After leaving the Army in 2011, Dr. Horne joined a private practice in La Jolla, Calif., and became credentialed with Scripps Memorial Hospital La Jolla as a dental consultant. Health and education are of paramount importance to Dr. Horne, and since 2012, he has been writing dental articles for MedicineNet and WebMD to provide accurate information about oral health to the public. He is a member of the American Dental Association (ADA), Academy of General Dentistry (AGD), California Dental Association (CDA), and the San Diego County Dental Society and American Academy of Cosmetic Dentistry (AACD). He is a preferred provider with Invisalign and spends countless hours each year pursuing continuing education in order to maintain a standard of excellence in dentistry. Dr. Horne has been married for 15 years to his wife, Christy. They have 3-year-old twins, Camille and Trent, and very recently welcomed their third child, Colette Elise, on July 6! The heart and soul of the family is Roscoe, their chocolate Labrador.
Processing a denture is usually performed using a lost-wax technique whereby the form of the final denture, including the acrylic denture teeth, is invested in stone. This investment is then heated, and when it melts the wax is removed through a spruing channel. The remaining cavity is then either filled by forced injection or pouring in the uncured denture acrylic, which is either a heat cured or cold-cured type. During the processing period, heat cured acrylics—also called permanent denture acrylics—go through a process called polymerization, causing the acrylic materials to bond very tightly and taking several hours to complete. After a curing period, the stone investment is removed, the acrylic is polished, and the denture is complete. The end result is a denture that looks much more natural, is much stronger and more durable than a cold cured temporary denture, resists stains and odors, and will last for many years.
Regardless of whether a patient gets partial or full dentures, the transition may feel uncomfortable and awkward at first. It may take a little while for the patient to get used to eating and speaking with the dentures and it takes roughly the same amount of time for the cheeks and the tongue to learn how to naturally hold your dentures in place. During the initial period, it is not uncommon for the patient to experience an excessive production of saliva, irritations stemming from feeling like the space inside the mouth has become cramped and like the lips are being pushed forward, and some level of soreness. If the irritation escalates to an unbearable level, do not hesitate to visit your dentist for a check up.
For most cases, this office is well equipped and able to be of great benefit. If you have a difficult case, you may need someone with a greater level of ability. I am unfortunately unable to rate this practice very high, while mine is a delicate and difficult case, I was left to find another professional to help me complete my implant process that was started with this office.
The fabrication of a set of complete dentures is a challenge for any dentist/denturist. There are many axioms in the production of dentures that must be understood; ignorance of one axiom can lead to failure of the denture. In the vast majority of cases, complete dentures should be comfortable soon after insertion, although almost always at least two adjustment visits are necessary to remove the cause of sore spots. One of the most critical aspects of dentures is that the impression of the denture must be perfectly made and used with perfect technique to make an accurate model of the patient's edentulous (toothless) gums. The dentist or denturist must use a process called border molding to ensure that the denture flanges are properly extended. An array of problems may occur if the final impression of the denture is not made properly. It takes considerable patience and experience for a dentist to know how to make a denture, and for this reason it may be in the patient's best interest to seek a specialist, either a prosthodontist or denturist, to make the denture. A denturist is a trained and licensed professional who sees patients in need of dentures, partials, relines or repairs. A denturist not only takes the impression, but makes the entire denture in his or her own laboratory. The denturist then schedules a date for the delivery of the finished dentures to the patient. A general dentist may do a good job making dentures, but only if he or she is meticulous and experienced. Many dentists no longer make dentures themselves. but instead take an impression of the patients' mouth and then either send the impressions to a dental laboratory, which could be anywhere in the world, or send the patient to a denturist. Once the laboratory receives dental impressions of the patient's mouth, the laboratory creates plaster molds from them. The laboratory uses the molds to create the wax rims used to register the patient's bite. These wax rims are returned to the dentist, who uses them to register the patient's bite. The dentist may assist the patient in choosing the correct size of teeth for the dentures, or simply make the selection himself. Once bite registration is completed and the teeth are selected for the dentures, the wax rim is usually returned to the dental laboratory in order to have the denture teeth set into the wax. Once the teeth are set into the wax rim, the result is a prefinished denture that looks almost like the finished product. This prefinished denture is usually returned to the dentist's office and the patient usually has a chance to approve the setup (for immediate or standard dentures) or to try the denture before it is finished. After approval by the patient, the dentist returns the pre-denture to the laboratory for final processing. The finished denture is then returned to the dentist's office for delivery to the patient.
First of all the facility is not equipped properly, during service you have to spit into a plastic cup which is completely ridiculous. Secondly, they make you wait 9 months instead of 7 to heal your gum after pulling out original teeth. Final product (ultimate fit) break after 2 months in the mouth while eating pasta. Low quality material!!! Fighting to get our money back. :((
Generally speaking partial dentures tend to be held in place by the presence of the remaining natural teeth and complete dentures tend to rely on muscular co-ordination and limited suction to stay in place. The maxilla very commonly has more favorable denture bearing anatomy as the ridge tends to be well formed and there is a larger area on the palate for suction to retain the denture. Conversely, the mandible tends to make lower dentures much less retentive due to the displacing presence of the tongue and the higher rate of resorption, frequently leading to significantly resorbed lower ridges. Disto-lingual regions tend to offer retention even in highly resorbed mandibles, and extension of the flange into these regions tends to produce a more retentive lower denture. An implant supported lower denture is another option for improving retention.
If you decide to get a partial denture, you’ll need to visit your dentist to have metal clasps attached to your surrounding teeth and an impression made of the area your partial will fill. The impression will be sent to a dental lab, where a technician will fabricate a custom denture that includes a gum-colored base that will fit securely over your gums. A metal framework will be used to attach your new partial to the clasps on your natural teeth to ensure a secure fit.
Often, the process of getting beautiful, custom dentures begins with one or more tooth extractions. Next, your dentist will begin the process of creating your new dentures. A conventional denture is fitted after a full-mouth extraction (removal of all teeth) once your gums have healed. In most cases, immediate dentures are created and placed immediately after your extractions, allowing the gums to heal underneath the appliance.
Later that afternoon I came back to have 16 teeth extracted. I got to the office and waited about 30 minutes before I was seen. I got to the back and began injections. After this I went to a full blown panic attack and came close to passing out. The one positive is the dentist who was working on me took it in stride. I wasn't treated disrespectfully and after about 30 minutes the panic subsided and she was able to finish my injections and begin pulling teeth.
