Powder application. Sprinkle a thin, uniform layer throughout the tissue-bearing surface of the denture. Shake off excess powder and press the denture into place. Powders may be preferred over pastes because they are easier to clean off the denture and tissue. In addition, they don't have the same tendency as pastes do to "shim" (keep the denture away from the tissue).
Partial Dentures: Partial dentures can either be made with a plastic base or a metal framework that supports the number of teeth that need to be replaced. It is held in the mouth by using clasps and rests that are carefully adapted around the natural teeth. The partial denture that uses a metal framework is the traditional design, due to the rigidity and strength of the metal. Plastic partial dentures have normally been used as emergency or temporary replacements of missing teeth, allowing the gums and bone to heal before a definitive restorative solution is obtained. Recently, however, various materials such as Valplast have been developed to provide durable, flexible alternatives in certain situations.
Acrylic partial dentures are more affordable, but they tend to feel more bulky. This partial has an acrylic base into which the denture teeth are set and is attached to your natural teeth with small metal clasps. The acrylic partial may be available with more durable, natural-looking teeth. The practice staff can inform you of availability in each office.

Always remove your dentures before sleeping to avoid damaging them, dislodging them, and to give your gums some time to relax. Submerge your dentures fully in warm, but not hot, water to keep them from drying out and becoming misshapen. Only use denture soaking solution if your dentures do not have metal components as the solution can tarnish the metal.


Temporary or interim appliances serve many useful purposes and are often an integral part of a prosthetic treatment plan. These appliances can be designed to be either fixed or removable. This simple appliance is excellent for temporary replacement of front teeth while the patient is waiting for a permanent bridge, a partial, or implants. This removable interim bridge is made of a clear vacuum-formed material. The appliance simply snaps into place.
There are several types of partial and full dentures. Complete dentures, also called full dentures, may be recommended when all teeth in the upper or lower jaw are missing. There are two options for complete dentures: immediate and conventional. Immediate dentures are made before the patient's teeth are removed and can be inserted as soon as the tooth removal surgery is complete.

In 1820, Samuel Stockton, a goldsmith by trade, began manufacturing high-quality porcelain dentures mounted on 18-carat gold plates. Later dentures from the 1850s on were made of Vulcanite, a form of hardened rubber into which porcelain teeth were set. In the 20th century, acrylic resin and other plastics were used.[12] In Britain, sequential Adult Dental Health Surveys revealed that in 1968 79% of those aged 65–74 had no natural teeth; by 1998, this proportion had fallen to 36%.[13]
Processing a denture is usually performed using a lost-wax technique whereby the form of the final denture, including the acrylic denture teeth, is invested in stone. This investment is then heated, and when it melts the wax is removed through a spruing channel. The remaining cavity is then either filled by forced injection or pouring in the uncured denture acrylic, which is either a heat cured or cold-cured type. During the processing period, heat cured acrylics—also called permanent denture acrylics—go through a process called polymerization, causing the acrylic materials to bond very tightly and taking several hours to complete. After a curing period, the stone investment is removed, the acrylic is polished, and the denture is complete. The end result is a denture that looks much more natural, is much stronger and more durable than a cold cured temporary denture, resists stains and odors, and will last for many years.
Overdentures are an alternative that can be used if traditional dentures prove to be extremely uncomfortable or if you have a few natural teeth left. Overdentures are fitted over the roots of natural teeth and either rest on these or on dental implants, if there are no natural teeth to fit over. Some find this type of denture more comfortable and they are also easily removable.

Complete Dentures: Complete dentures are made of a plastic base that is colored in order to replicate gum tissue and supports a full set of plastic or porcelain teeth. The traditional full denture is held in the mouth by forming a seal with the gums. They can also be held in place by attaching to dental implants that are surgically placed in the bone of the jaws. This treatment is much more expensive than the traditional complete denture.

If you’ve had a metal RPD, you know how cumbersome and heavy they can be. Dentists often see them damage remaining teeth and injure the inside of the mouth. Ultaire™ AKP partial dentures are 60% lighter than metal frames! The polymer was formulated to be lightweight as well as strong, similar to polymers used in hip implants. This creates partial dentures that are comfortable, durable and biocompatible, meaning they are safe to have in your body. Unlike metal, Ultaire™ AKP is non-toxic, non-irritating and nickel-free.
An overdenture is a removable dental prosthesis that covers and rests on one or more remaining tooth roots. A removable partial denture is a dental prosthesis that replaces some teeth and is built around existing natural teeth. Both the overdenture and the removable partial denture may be connected to the remaining tooth roots or remaining natural teeth with anchors made of metal or plastic. These connections improve stability and the retention of both prostheses.
A complete denture consists of a thin acrylic base that rests on the gum tissue and is the same color as your gums. Porcelain or acrylic replacement teeth built into the base give the appearance of natural teeth emerging from the gums. We know that your smile is unique, and Dr. Yonan, Scott, Bushnell, Fairbanks & Quigley have the experience to help you select the teeth that appear most natural and harmonious in your smile. This gives you the option to customize the way you look, whether you want a "new" smile or just want to restore the one you had.
To clarify, denture-supported implants normally require four implants per arch to secure these bridges. The aim of this inaccurate narrative is to get you to call in using prices and terms that lead you to believe you’ve discovered an “affordable” denture implant solution. Inevitably, sticker shock and disappointment sets in after you find out the true cost.
MCCALLA, ALABAMA -- 5/8/18 I had all my remaining top teeth removed & an immediate denture (ID) put in. First, I was the last surgery of the day. The dentist let all his experienced staff leave & had the receptionist assist him! He had to tell her every little thing to do. She couldn't even work the suction instrument correctly & she finally just quit suctioning my mouth!
Affordable Dentures, Franklin, Indiana, should be closed and prohibited from operating in the state. An investigation of this office and the qualifications of its staff are imperative. When I paid $1990 on my credit card to the assistant named "**"€, I asked for a copy of my file. **'s reply was, "What do you need it for?" I said I have the right to access my medical records. She said, "We don'€™t do that."€ Affordable Dentures willfully violates HIPPA law.
Our hope is that, regardless of your skill level when you join one of our lab teams, you will continue to grow as a dental lab professional. ADDL was founded by and is managed by dental lab technicians. What does this mean for you? Not only will you be managed by someone who has experience working in your position, you will have the opportunity to be considered for management team positions, such as on-site management and upper-management roles.
Price: Dentures tend to be the least costly solution for replacing missing teeth. Alternative treatment options such as dental bridges or implants are generally more expensive and require more extensive treatment. However, dental bridges and implants do offer a better fit, increased comfort, better chewing ability, and a more natural appearance. For these reasons, dentures-wearers may want to ask their dentists about these alternative treatment options. Your dentist can let you know if you are a good candidate for dentures, dental bridges, or implants, and let you know the cost of these options.
A common situation is that insurance benefits include payment for half of the cost of a partial payment after the policy’s deductible is paid (if it has one). The best way to find out what your insurance will cover is to contact your insurance provider directly. Most discount dental plans give huge discounts for partial dentures, so it’s worth taking a closer look.
As you may know, dentures are removable substitutes for missing teeth. Full dentures provide value when a person is missing all of their natural teeth while partial dentures replace only individual missing teeth to eliminate gaps and improve chewing. Denture treatment is customized specifically to each patient, and Dr. Yonan, Scott, Bushnell, Fairbanks & Quigley can help you decide which option works best for you.

It is extremely important to practice healthy dental hygiene when wearing dentures. There is an increased risk of developing a more serious medical condition should oral irritation result from improper dental hygiene. These conditions include, but are not limited to, periodontal disease, leukoplakia (thickened white, potentially precancerous patches on the mucous membranes, also called smoker’s tongue) and fungal (denture stomatitis) infections.
While wearing removable dentures, patients should not chew gum or use toothpicks. In addition, patients need to be careful when eating food that is hot or hard, as well as anything with bones or shells. It may take a while to get used to chewing with dentures, so Dallas Laser Dentistry suggests patients start with softer foods that are cut into small pieces. Chewing slowly and using both sides of the mouth may also help some patients.
The low-end cost for a full-mouth restoration is about $11,000, a reasonable financial investment compared to a mouthful of single implants (which could run $160,000). A dental practice representing that they can provide a complete-mouth restoration starting at $1,000 is certainly being disingenuous and deceptive. At a minimum, such a procedure requires at least 4 implants and would “start” at a figure closer to $9,000, although probably much higher when considering extractions and prosthetic costs.
I have both upper and lower dentures, but the uppers, which are newer, are very white compared to the bottoms. It will cost me a lot (like $500) to replace them, but I want them to match. Can I whiten my dentures?Answer: It is not possible to whiten dentures like natural teeth because dentures are made of plastic. To minimize staining, properly clean your dentures daily to remove food and plaque bacteria. Brushing with a denture brush or soft toothbrush will prevent dentures from becoming permanently stained and will keep your mouth healthy. Moisten the brush and apply a nonabrasive denture paste (regular toothpaste is too abrasive) or use liquid soap. Brush every surface, inside and out, scrubbing gently. A variety of over-the-counter denture-cleanser products may be safely used (by following the manufacturer’s instructions) to remove some stains. You may also consider soaking your dentures in a cup of water with a teaspoon of household bleach, but be sure to rinse them off well before putting them back in your mouth. When cleaning your dentures, be careful not to drop them as they can break. You should clean your dentures over a sink that is filled with water or has a washcloth in place to prevent the dentures from breaking should you drop them while cleaning. More stubborn stains may require removal by your dentist or prosthodontist, a specialist in denture care and maintenance. To locate a prosthodontist near you, visit www.gotoapro.org. Response provided by the American College of Prosthodontists. Back to top
If you decide to get a partial denture, you’ll need to visit your dentist to have metal clasps attached to your surrounding teeth and an impression made of the area your partial will fill. The impression will be sent to a dental lab, where a technician will fabricate a custom denture that includes a gum-colored base that will fit securely over your gums. A metal framework will be used to attach your new partial to the clasps on your natural teeth to ensure a secure fit.
Once the numbness wore off I could not open my mouth fully for days. It took a full week before I was out of severe pain. It honestly felt like she had broken my jaw. I decided to tough it out as I have a phobia of dentists. Once the severe pain was over my jaw was sore for the next two months. I'm fairly certain that isn't the norm for routine extractions.
Some partial dentures are made almost entirely of acrylic – but just like metal framework dentures, acrylic dentures have wire clasps that attach to any remaining natural teeth. These are generally used as a cost-effective alternative to metal-based partial dentures. They can also be used for transitional dentures when you’re expected to have additional prosthetic treatments, such as implants, in the future.
Review: My own experience with Todd Young has been that he does care about results and about how his work affects me as a patient. I have some pre-existing medical conditions that made fitting me with dentures very challenging and Todd has shown himself to be a perfectionist in his effort to get my dentures ”just right” and working for me. He and his staff have explained every step of the process and answered any questions I’ve had. In addition, I’ve seen Todd go above and beyond what I had expected, especially in terms of dealing with a difficult surgery I’d undergone at another dental practice — he did his best to correct a situation that he had nothing to do with creating! I wasn’t expecting that kind of support and both my wife and I are very grateful to Todd for his help. And his staff are certainly friendly and courteous. It’s hard for me to believe that the negative reviews posted here aren’t just from someone who has to have some complaint about anything and everything. I can say that in the many visits I’ve made to Todd because of my special fitting needs, I have never heard another customer complain about ANYTHING they experienced with Todd and his staff.
Your dentist or prosthodontist will instruct you as to how long to wear dentures and when to remove them. During the first several days after receiving your denture, you may be asked to wear it all the time, including while you sleep. Although this may be temporarily uncomfortable, it is the quickest way to identify the areas on the denture that may need adjustment. Once adjustments are made, you should remove dentures before going to bed. This allows gum tissues to rest and allows normal stimulation and cleansing by the tongue and saliva. The denture can be put back in the mouth in the morning.
×