Complete Dentures: Complete dentures are made of a plastic base that is colored in order to replicate gum tissue and supports a full set of plastic or porcelain teeth. The traditional full denture is held in the mouth by forming a seal with the gums. They can also be held in place by attaching to dental implants that are surgically placed in the bone of the jaws. This treatment is much more expensive than the traditional complete denture.

Overall, when considering full dentures for the lower jaw, an overdenture should be discussed with your dental professional as it can provide the most effective, satisfying, and longest-lasting alternative. Traditional full and partial denture options should be explored, weighing their benefits and pitfalls carefully to find the right dentures for your tooth loss.  

A complete denture consists of a thin acrylic base that rests on the gum tissue and is the same color as your gums. Porcelain or acrylic replacement teeth built into the base give the appearance of natural teeth emerging from the gums. We know that your smile is unique, and Dr. Yonan, Scott, Bushnell, Fairbanks & Quigley have the experience to help you select the teeth that appear most natural and harmonious in your smile. This gives you the option to customize the way you look, whether you want a "new" smile or just want to restore the one you had.
Always remove your dentures before sleeping to avoid damaging them, dislodging them, and to give your gums some time to relax. Submerge your dentures fully in warm, but not hot, water to keep them from drying out and becoming misshapen. Only use denture soaking solution if your dentures do not have metal components as the solution can tarnish the metal.
Throughout the years, a key driver of our expansion (now more than 230 affiliated practice locations...and counting!) has been Affordable Care, a dental support organization that equips affiliated practice owners to meet their ever-growing patient needs. Affordable Care provides lab and business services through a nationwide network of on-site Affordable Dentures Dental Laboratories (ADDL) and extensive nonclinical support.

Our process allows most patients to arrive early in the morning to make impressions for your denture, have your extractions done during the day, and receive your dentures by the end of the day. With our DDS All-In-One Solution, you could have an all-new smile in the same day, thanks to our state-of-the-art 3D X-ray technology. This set of teeth, although temporary, locks into place, meaning you can immediately begin the transition from eating softer foods, to eating the foods you want again.

The fabrication of a set of complete dentures is a challenge for any dentist/denturist. There are many axioms in the production of dentures that must be understood; ignorance of one axiom can lead to failure of the denture. In the vast majority of cases, complete dentures should be comfortable soon after insertion, although almost always at least two adjustment visits are necessary to remove the cause of sore spots. One of the most critical aspects of dentures is that the impression of the denture must be perfectly made and used with perfect technique to make an accurate model of the patient's edentulous (toothless) gums. The dentist or denturist must use a process called border molding to ensure that the denture flanges are properly extended. An array of problems may occur if the final impression of the denture is not made properly. It takes considerable patience and experience for a dentist to know how to make a denture, and for this reason it may be in the patient's best interest to seek a specialist, either a prosthodontist or denturist, to make the denture. A denturist is a trained and licensed professional who sees patients in need of dentures, partials, relines or repairs. A denturist not only takes the impression, but makes the entire denture in his or her own laboratory. The denturist then schedules a date for the delivery of the finished dentures to the patient. A general dentist may do a good job making dentures, but only if he or she is meticulous and experienced. Many dentists no longer make dentures themselves. but instead take an impression of the patients' mouth and then either send the impressions to a dental laboratory, which could be anywhere in the world, or send the patient to a denturist. Once the laboratory receives dental impressions of the patient's mouth, the laboratory creates plaster molds from them. The laboratory uses the molds to create the wax rims used to register the patient's bite. These wax rims are returned to the dentist, who uses them to register the patient's bite. The dentist may assist the patient in choosing the correct size of teeth for the dentures, or simply make the selection himself. Once bite registration is completed and the teeth are selected for the dentures, the wax rim is usually returned to the dental laboratory in order to have the denture teeth set into the wax. Once the teeth are set into the wax rim, the result is a prefinished denture that looks almost like the finished product. This prefinished denture is usually returned to the dentist's office and the patient usually has a chance to approve the setup (for immediate or standard dentures) or to try the denture before it is finished. After approval by the patient, the dentist returns the pre-denture to the laboratory for final processing. The finished denture is then returned to the dentist's office for delivery to the patient.
Processing a denture is usually performed using a lost-wax technique whereby the form of the final denture, including the acrylic denture teeth, is invested in stone. This investment is then heated, and when it melts the wax is removed through a spruing channel. The remaining cavity is then either filled by forced injection or pouring in the uncured denture acrylic, which is either a heat cured or cold-cured type. During the processing period, heat cured acrylics—also called permanent denture acrylics—go through a process called polymerization, causing the acrylic materials to bond very tightly and taking several hours to complete. After a curing period, the stone investment is removed, the acrylic is polished, and the denture is complete. The end result is a denture that looks much more natural, is much stronger and more durable than a cold cured temporary denture, resists stains and odors, and will last for many years.

Dr. Athari's dental center has an on-site dental lab that fabricates new dentures and provides repairs and relines, often with same-day service. Being able to provide dentures in a day is a significant advantage, especially for patients who have traveled far distances to visit the practice. The on-site lab also eliminates the need to use outside commercial labs, which helps keep our fees low.

I had 16 teeth pulled and plates made for under $1,000. I went in in the morning and had new teeth the early the next morning with the main cost being $40 a tooth for pulling which took about a half hour. The upper fits well and I have been getting by with lower, need it refitted but do not have the doe re me at present. It is just crazy what dentists and doctors charge for routine proceedures here in the US.
^{well it's been over a year now. and iam still a very happy smiling!! patient of dr. atari. affordable dentures & implants. i have refferd several people. each person that has gone can't thank aaffordable dentures/implants or dr .atari and the wonderful staff !!!enough. and me too. for recommending , referring ,them. the best and great for your wallet as well..should be 10 stars !and the ladys at the front are also 10 stars! without them what would they do ? we do ???? thank you again. so much for my beautiful beautiful smile and giving me the ability to smile big and beautiful again.. sincerely toni barajas.}
Our process allows most patients to arrive early in the morning to make impressions for your denture, have your extractions done during the day, and receive your dentures by the end of the day. With our DDS All-In-One Solution, you could have an all-new smile in the same day, thanks to our state-of-the-art 3D X-ray technology. This set of teeth, although temporary, locks into place, meaning you can immediately begin the transition from eating softer foods, to eating the foods you want again.
Patients may consider partial or full removable dentures to replace any missing teeth and help them eat, speak, and look better. Full or complete dentures replace all of the teeth and connective gum tissue on the upper and/or lower jaw. Partial dentures, also called a removable bridge, can be used to replace gaps in the natural teeth. Removable dentures at Dallas Laser Dentistry are made with advanced techniques by Dr. Mary Swift and Dr. Terrel Myers for a comfortable fit and to match the shade and color of the natural teeth in partial dentures. At Dallas Laser Dentistry, all restorative dentistry, like removal dentures, are made to suit the patient’s face and look natural, but dazzling.
On the cheap or “discount denture” end, you get units with premade fits that often look artificial. Less expensive sets are generally made with lower quality materials and their warranties reflect that. In the end, cheap dentures lack the desired lifelike look, are more prone to crack or break outright, may have poor bite alignment, and are typically less comfortable.
Acrylic partial dentures are more affordable, but they tend to feel more bulky. This partial has an acrylic base into which the denture teeth are set and is attached to your natural teeth with small metal clasps. The acrylic partial may be available with more durable, natural-looking teeth. The practice staff can inform you of availability in each office.
On my 3rd visit back to readjust my partial...I was going to a wedding and the Dr. wanted me to come back in to make sure it fit. The girl who took care of me (short curly auburn/reddish hair said the partial could not be adjust. I told her the Dr. adjusted it last week for me. Then she said: "well, you are just going to have to learn to adjust it yourself at home in a mean, stern voice.

The first visit was nice enough. The receptionists were polite even if they didn't seem to have a clue what they were doing. The only bad experience I had was a very rude lady who dealt with the mountains of paperwork I was filling out. You could clearly tell that she hated her job. With that being said you run into unpleasant people every day and unless you are incredibly thin skinned it shouldn't bother you. It was the least of my problems.

Dentures are just one option for replacing missing teeth; some of the others include fixed bridgework and dental implants. Each method has its particular pluses and minuses, which should be carefully considered. There are also several varieties of dentures available to address specific issues, from partial dentures to implant-supported overdentures. The best option for you will depend on your individual situation.
Eating with new dentures will take a little practice and may be uncomfortable for some wearers for a few weeks. To get used to the new denture, start with soft foods cut into small pieces. Chew slowly using both sides of your mouth. As you get used to new dentures, add other foods until you return to a normal diet. Be cautious with hot or hard foods and sharp-edged bones or shells. And, avoid foods that are extremely sticky or hard. You should also avoid chewing gum while you wear the denture. Also, don't use toothpicks while wearing dentures.