We paid for extraction and dentures and it was for 2 sets one to wear until gums heal and so we did but it took so much time because they said not ready on gums. This went on & on and then they would NOT answer their phone when we called for the permanent set (we paid for) and they would not return messages. So 2 years have gone and I am left with the first set used until gum set and they are awful and this place is in Odessa, Texas. They are cheats and liars.
An overdenture is a removable dental prosthesis that covers and rests on one or more remaining tooth roots. A removable partial denture is a dental prosthesis that replaces some teeth and is built around existing natural teeth. Both the overdenture and the removable partial denture may be connected to the remaining tooth roots or remaining natural teeth with anchors made of metal or plastic. These connections improve stability and the retention of both prostheses.
Yes. Good oral health is still important – even if you have a few missing teeth. In addition to caring for your new dental prosthetic, you’ll also need to brush your gums and tongue twice daily to stimulate circulation and remove bacteria that could cause gum disease. Continue seeing your dentist twice yearly for exams and cleanings, and be sure to bring your partial dentures along to each visit. After a few years, you may find that your partial needs to be rebased to better fit the changes to the bone structure in your mouth.
The process of getting dentures requires several appointments, usually over a period of several weeks.  Highly accurate impressions (molds) and measurements are taken and used to create your custom denture.  Several “try-in” appointments may be necessary to ensure proper shape, color, and fit.  At the final appointment, your dentist will precisely adjust and place the completed denture, ensuring a natural and comfortable fit.
Dentures are mainly made from acrylic due to the ease of material manipulation and likeness to intra-oral tissues, ie. gums. Most dentures made are fabricated from heat-cured acrylic polymethyl methacrylate and rubber-reinforced polymethyl methacrylate.[3] Coloring agents and synthetic fibers are added to obtain the tissue-like shade, and to mimic the small capillaries of the oral mucosa, respectively.[4] However, dentures made from acrylic can be fragile and fracture easily if the patient has trouble adapting neuromuscular control. This can be overcome by reinforcing the denture base with cobalt chromium (Co-Cr). They are often thinner (therefore more comfortable) and stronger (to prevent repeating fractures).

Before we discuss the factors that will impact your buying decision, let’s first make a very important distinction: Seeking out affordable dentures prices is not the same as getting “cheap” dentures. You can get fitted by a seasoned, skilled dental professional and get quality dentures at an affordable out-of-pocket price. Affordable dentures refer to the value you get for your financial investment, and you can get well-crafted dentures that fit properly without paying thousands of dollars for them.
Regardless of whether a patient gets partial or full dentures, the transition may feel uncomfortable and awkward at first. It may take a little while for the patient to get used to eating and speaking with the dentures and it takes roughly the same amount of time for the cheeks and the tongue to learn how to naturally hold your dentures in place. During the initial period, it is not uncommon for the patient to experience an excessive production of saliva, irritations stemming from feeling like the space inside the mouth has become cramped and like the lips are being pushed forward, and some level of soreness. If the irritation escalates to an unbearable level, do not hesitate to visit your dentist for a check up.
Full or partial dentures consist of a gum-colored base made of plastic resin, which fits over the remaining alveolar (bone) ridge that formerly held the teeth. The prosthetic teeth projecting from the base are designed to look and function just like your natural teeth. Dentures are held in place primarily by the suctioning effect of their close fit against the alveolar ridges — that's why it's so important that they are fitted properly. The upper denture also gets extra support from the large surface area of the roof of the mouth (palate), which generally makes it extremely stable.

Although dental implant success rates are high, there are cases in which the implant will fail. Most cases of implant failure can be prevented if the patient maintains his or her oral health and chooses a qualified implant dentist to plan and perform the procedure. Dental implants are more likely to fail in the maxilla (upper jaw) than in the mandible (lower jaw). Possible reasons for implant failure include:
Most patients need a few weeks to get used to the feel and use of their new dentures. Until the muscles of the cheeks and tongue adjust to the new dentures and learn to keep them in place, they may feel a little loose. It will also take time before you are comfortable putting your dentures in place and removing them. Since the mouth increases the amount of saliva produced in reaction to the new dentures, patients should expect to have mild sores and irritations in their mouth.
A film of saliva typically helps hold dentures in place. Denture adhesives may be used if the salivary glands do not produce a sufficient amount of saliva. Denture adhesives are not, however, a remedy for ill-fitting dentures. A denture that fits poorly (i.e., feels loose or causes discomfort) may need to be relined or replaced as it can contribute to the development of mouth sores.
The fabrication of a set of complete dentures is a challenge for any dentist/denturist. There are many axioms in the production of dentures that must be understood; ignorance of one axiom can lead to failure of the denture. In the vast majority of cases, complete dentures should be comfortable soon after insertion, although almost always at least two adjustment visits are necessary to remove the cause of sore spots. One of the most critical aspects of dentures is that the impression of the denture must be perfectly made and used with perfect technique to make an accurate model of the patient's edentulous (toothless) gums. The dentist or denturist must use a process called border molding to ensure that the denture flanges are properly extended. An array of problems may occur if the final impression of the denture is not made properly. It takes considerable patience and experience for a dentist to know how to make a denture, and for this reason it may be in the patient's best interest to seek a specialist, either a prosthodontist or denturist, to make the denture. A denturist is a trained and licensed professional who sees patients in need of dentures, partials, relines or repairs. A denturist not only takes the impression, but makes the entire denture in his or her own laboratory. The denturist then schedules a date for the delivery of the finished dentures to the patient. A general dentist may do a good job making dentures, but only if he or she is meticulous and experienced. Many dentists no longer make dentures themselves. but instead take an impression of the patients' mouth and then either send the impressions to a dental laboratory, which could be anywhere in the world, or send the patient to a denturist. Once the laboratory receives dental impressions of the patient's mouth, the laboratory creates plaster molds from them. The laboratory uses the molds to create the wax rims used to register the patient's bite. These wax rims are returned to the dentist, who uses them to register the patient's bite. The dentist may assist the patient in choosing the correct size of teeth for the dentures, or simply make the selection himself. Once bite registration is completed and the teeth are selected for the dentures, the wax rim is usually returned to the dental laboratory in order to have the denture teeth set into the wax. Once the teeth are set into the wax rim, the result is a prefinished denture that looks almost like the finished product. This prefinished denture is usually returned to the dentist's office and the patient usually has a chance to approve the setup (for immediate or standard dentures) or to try the denture before it is finished. After approval by the patient, the dentist returns the pre-denture to the laboratory for final processing. The finished denture is then returned to the dentist's office for delivery to the patient.
Later that afternoon I came back to have 16 teeth extracted. I got to the office and waited about 30 minutes before I was seen. I got to the back and began injections. After this I went to a full blown panic attack and came close to passing out. The one positive is the dentist who was working on me took it in stride. I wasn't treated disrespectfully and after about 30 minutes the panic subsided and she was able to finish my injections and begin pulling teeth.
A complete denture can be either “conventional” or “immediate.”  A conventional type is made after the teeth have been removed and the gum tissue has healed (usually takes 4 to 6 weeks).  During this time, the patient will go without teeth.  Immediate dentures are made in advance and immediately placed after the teeth are removed, thus preventing the patient from having to be without teeth during the healing process.  Once the tissues shrink and heal, adjustments will have to be made.
Custom-made porcelain dentures are crafted to look like your natural teeth (or an improved version of your natural teeth). Great care is taken to design and fabricate a set of teeth that not only look natural, but also complement the size and shape of your mouth. Dentists may first create wax versions of the dentures so patients can try on their new teeth on before the final dentures are made; this process allows for design modifications and fit adjustments that can be applied to the final set of dentures.
Implant technology can vastly improve the patient's denture-wearing experience by increasing stability and preventing bone from wearing away. Implants can also aid retention. Instead of merely placing the implants to serve as blocking mechanism against the denture's pushing on the alveolar bone, small retentive appliances can be attached to the implants that can then snap into a modified denture base to allow for tremendously increased retention. Available options include a metal "Hader bar" or precision balls attachments.
Having a complete set of bright and well-aligned teeth can give you a beautiful smile. When a person loses his or her teeth to disease, injury, accidents or age, the gaps in the smile are usually enough reasons to warrant a dental solution. Of course, the reasons for treating missing teeth goes beyond aesthetic reasons and extends into the realms of health, such as personal well-being and simply feeling good about oneself.

Once the actual extractions were over they stitched my mouth up and inserted my temporary denture. Now I consider myself a very tolerant person. I was willing to look past the sales pitches, the potentially broken jaw, and the incompetent receptionists. What really set me off is when the denture itself was so poorly made that it would not even stay in my mouth. I knew something was up when the lady who inserted the denture told me that I would need to wear "a lot" of adhesive to get the denture to stay in. Despite the fact that my mouth was swollen and that my gums had not yet receded at all.


First and Foremost, this is the nicest and cleanest dental office I have ever been in !! I am always very nervous to go to the dentist and Dr Athari and his staff made me feel very comfortable. I would highly recommend going to this office and ONLY this office. My tooth ache is finally gone, and Dr Athari gave me my smile back :) I could not thank Affordable Dentures Mesa enough !!!!

In cases where teeth need to be removed, an immediate denture is typically placed to enable proper healing of the extraction sites and serve as an esthetic replacement for natural teeth. This can be easily modified for changing ridge contours during healing until final dentures can be made. In constructing the immediate dentures, dentists will use a shade and mold chart to choose replacement teeth that will most closely match your natural teeth, minimizing any changes in appearance.


The process of receiving your customized partial dentures is relatively easy when compared to more invasive replacement procedures that take a long time, like dental implants. The creation and fitting of your partial dentures will take a few weeks at most. We will first make impressions and molds of your remaining teeth, gums, and jaw that will help us create partial dentures that fit you perfectly.


In need of a professional dentist.I live in Northwest Ohio. Had my left leg amputated some years back. Then I came down with mrsa., so now I'm in need of dental help. After the Drs removed my leg then after year, they had come back and take off 2 more inches. I was fitted with a prosthetic and it never fit. Then I spend 2 1/2 years in a nursing home that sucks. I'm afraid of getting ripped off with getting false teeth.If anyone can recommend a dentist that does this kind of work in Northwest Ohio please email me. THANKS IN ADVANCE I just want to smile again.
Patients should combine the brushing of their dentures with soaking them in an immersion cleaner from time to time as this combined cleaning strategy has been shown to control denture plaque.[33] Due to microbial invasion, the lack of use of immersion cleaners and inadequate denture plaque control will cause rapid deterioration of the soft linings of the denture.[34]
Partial Dentures: Partial dentures can either be made with a plastic base or a metal framework that supports the number of teeth that need to be replaced. It is held in the mouth by using clasps and rests that are carefully adapted around the natural teeth. The partial denture that uses a metal framework is the traditional design, due to the rigidity and strength of the metal. Plastic partial dentures have normally been used as emergency or temporary replacements of missing teeth, allowing the gums and bone to heal before a definitive restorative solution is obtained. Recently, however, various materials such as Valplast have been developed to provide durable, flexible alternatives in certain situations.
Patients should combine the brushing of their dentures with soaking them in an immersion cleaner from time to time as this combined cleaning strategy has been shown to control denture plaque.[33] Due to microbial invasion, the lack of use of immersion cleaners and inadequate denture plaque control will cause rapid deterioration of the soft linings of the denture.[34]
Gum disease is caused by plaque and may result in tooth loss without proper treatment. Symptoms and signs of gum disease (gingivitis or periodontal disease) include receding gums, bad breath and pocket formation between the teeth and gums. Treatment depends upon the stage of the gum disease, how you responded to earlier treatments, and your overall health.
My lower dentures broke in half. What is the cost to repair my dentures?Answer: Dental procedures and costs vary widely based on many factors such as difficulty and the condition of your dentures as well as your bone and gums. The best way to determine fees for service is to visit with your dentist or prosthodontist and discuss the care you may need. The best solution is to return to the dentist or prosthodontist who made your dentures and have the broken denture repaired professionally. It may seem easy to fix, but it is important that the repair is done correctly to prevent problems with chewing and to avoid any sore spots. The doctor also needs to check the denture and adjust it after it’s repaired. There is also a chance that the denture is too old and no longer fit closely to your gums, and you may need a new one. To find a dentist who is a specialist who has extra training in making dentures, visit www.gotoapro.org.Response provided by the American College of Prosthodontists. Back to top
As of now I essentially have no teeth and won't until at least 2-3 months later when I am supposed to return for my "permanent denture". It is incredibly humiliating having to go out in public with no teeth. I returned to ask what they could do and they wanted around 300 bucks for a reline but recommended I just get a new denture made (which they of course wanted to charge me around 600 bucks for). I couldn't believe what I was hearing. They made an awful denture and refused to fix it. Suddenly all of the nightmare stories began to make sense. I kindly told them to screw off and that I would just wait a few months.
Later that afternoon I came back to have 16 teeth extracted. I got to the office and waited about 30 minutes before I was seen. I got to the back and began injections. After this I went to a full blown panic attack and came close to passing out. The one positive is the dentist who was working on me took it in stride. I wasn't treated disrespectfully and after about 30 minutes the panic subsided and she was able to finish my injections and begin pulling teeth. 

Affordable Dentures

×