I had the procedure done about 5 years ago and I'm down to one implant left. After the other 3 failed, I can say that one of them was my fault but the others I just feel were not seated properly and from what I researched I think 2 of my implants the dentist burned the bones so they inevitably failed. In fact the 1st one failed within 6 months and I knew walking out the day of the procedure something wasn't right with it but I was told it was just "healing".
The fabrication of a set of complete dentures is a challenge for any dentist/denturist. There are many axioms in the production of dentures that must be understood; ignorance of one axiom can lead to failure of the denture. In the vast majority of cases, complete dentures should be comfortable soon after insertion, although almost always at least two adjustment visits are necessary to remove the cause of sore spots. One of the most critical aspects of dentures is that the impression of the denture must be perfectly made and used with perfect technique to make an accurate model of the patient's edentulous (toothless) gums. The dentist or denturist must use a process called border molding to ensure that the denture flanges are properly extended. An array of problems may occur if the final impression of the denture is not made properly. It takes considerable patience and experience for a dentist to know how to make a denture, and for this reason it may be in the patient's best interest to seek a specialist, either a prosthodontist or denturist, to make the denture. A denturist is a trained and licensed professional who sees patients in need of dentures, partials, relines or repairs. A denturist not only takes the impression, but makes the entire denture in his or her own laboratory. The denturist then schedules a date for the delivery of the finished dentures to the patient. A general dentist may do a good job making dentures, but only if he or she is meticulous and experienced. Many dentists no longer make dentures themselves. but instead take an impression of the patients' mouth and then either send the impressions to a dental laboratory, which could be anywhere in the world, or send the patient to a denturist. Once the laboratory receives dental impressions of the patient's mouth, the laboratory creates plaster molds from them. The laboratory uses the molds to create the wax rims used to register the patient's bite. These wax rims are returned to the dentist, who uses them to register the patient's bite. The dentist may assist the patient in choosing the correct size of teeth for the dentures, or simply make the selection himself. Once bite registration is completed and the teeth are selected for the dentures, the wax rim is usually returned to the dental laboratory in order to have the denture teeth set into the wax. Once the teeth are set into the wax rim, the result is a prefinished denture that looks almost like the finished product. This prefinished denture is usually returned to the dentist's office and the patient usually has a chance to approve the setup (for immediate or standard dentures) or to try the denture before it is finished. After approval by the patient, the dentist returns the pre-denture to the laboratory for final processing. The finished denture is then returned to the dentist's office for delivery to the patient.
Sometimes, a Dallas dentist is not fully capable of dealing with the specialized needs of certain clients. That is where Dallas Dentures & Implants can help. We are a professional and courteous clinic that provides all types of prosthetic and aesthetic dental improvement. We specialize in this sort of work and are able to offer services from doctors who are experts in their field at a reasonable prices.
On my 3rd visit back to readjust my partial...I was going to a wedding and the Dr. wanted me to come back in to make sure it fit. The girl who took care of me (short curly auburn/reddish hair said the partial could not be adjust. I told her the Dr. adjusted it last week for me. Then she said: "well, you are just going to have to learn to adjust it yourself at home in a mean, stern voice.
See your dentist as soon as possible if your removable partial denture breaks, cracks or chips or if one of the teeth becomes loose. Also, your partial denture may need to be adjusted if you lose one of the supporting natural teeth. Sometimes dentists can make the repairs, often on the same day. Complex repairs can take longer. The sooner you make an appointment, the sooner you have a well-fitting partial denture again.
Our office is independently owned and operated, but we have the resources of a national network of implant and denture providers. With our on-site lab, we’re able to deliver same-day results in many cases. We strive to maintain lower rates by avoiding off-site lab needs and relying on our own highly trained technicians. Financing is available for qualified borrowers, and we do accept some insurance plans. If we’re not in your network, then we can provide you with a walk-out statement so you can expedite your own claim.
Medically, the consequences of not replacing missing teeth include unwanted and unhealthy nutritional changes. There are also potential risks of diabetes, obesity, heart disease, depression, and an increase in the likelihood of developing cancer. These are all prominent health risks that are avoidable by providing a dental structure with partial dentures or another quality tooth replacement option.
Dentures are removable dental appliances that replace missing teeth. Unlike dental implants and dental bridges, which are more or less permanently affixed to the bone, dentures are prosthetic teeth attached to a supporting structure. Dentures can be removed at night, for cleaning, or whenever desired. The most affordable dentures are those made with traditional plastic prosthetic teeth, but even more expensive porcelain cosmetic dentures usually cost less than implants.
In need of a professional dentist.I live in Northwest Ohio. Had my left leg amputated some years back. Then I came down with mrsa., so now I'm in need of dental help. After the Drs removed my leg then after year, they had come back and take off 2 more inches. I was fitted with a prosthetic and it never fit. Then I spend 2 1/2 years in a nursing home that sucks. I'm afraid of getting ripped off with getting false teeth.If anyone can recommend a dentist that does this kind of work in Northwest Ohio please email me. THANKS IN ADVANCE I just want to smile again.
Very disappointed in the dentist and staff at Affordable Dentures. I had my mother go there because of the high ratings in Yelp. I believe they have a new dentist and he promised my mother, who had purchased both upper and lower, that they would adjust to make lower dentures right. Instead she went in and they said there wasn't anything else they could help her with they would refund her . My mother explained she couldn't t eat with bottom dentures. They sent her home with no teeth. Very unprofessional. Elderly people need extra patience. She had arranged rides to their office several times to correct problem ( she lived 40 miles away ) . Very very unhappy with this company.
Terrible place. Had to go back several times because the denture they made tore up my gum. This is after I filed the rough spots off the denture myself at home. They said they could not adjust it anymore and would not make one that fit properly. Now they are even lying about that. Most of the people I talked to while waiting forever also were having problems with their painful dentures made there. Go to a quality dentist even if the cost is a little more, you will save time and pain in the long run. This place doesn't take appointments so expect to waste a day.
I went in for my finals and just like last time everyone was great everything went fast I was… I went in for my finals and just like last time everyone was great everything went fast I was treated like a queen and like I said before I highly recommend affordable dentures for dentures implants what ever they do they are awesome my smile is awesome I feel awesome I Christopher Atari and his staff from the bottom of my heart thank you thank you thank you and God bless I highly highly recommend affordable dentures sincerely Toni Barajas Read more
Processing a denture is usually performed using a lost-wax technique whereby the form of the final denture, including the acrylic denture teeth, is invested in stone. This investment is then heated, and when it melts the wax is removed through a spruing channel. The remaining cavity is then either filled by forced injection or pouring in the uncured denture acrylic, which is either a heat cured or cold-cured type. During the processing period, heat cured acrylics—also called permanent denture acrylics—go through a process called polymerization, causing the acrylic materials to bond very tightly and taking several hours to complete. After a curing period, the stone investment is removed, the acrylic is polished, and the denture is complete. The end result is a denture that looks much more natural, is much stronger and more durable than a cold cured temporary denture, resists stains and odors, and will last for many years.
Extra care must be taken when handling dentures or partials because they are delicate and could break when dropped. It is also important to prevent dentures or partials from drying out so place them in the specified soaking solution or plain water when not in use. Avoid hot water because this will cause the denture to lose its shape. Brush dentures daily to dislodge food deposits and prevent them from becoming stained.
Dr. Okunuga’s dental center has an on-site dental lab that fabricates new dentures and provides repairs and relines, often with same-day service. Being able to provide dentures in a day is a significant advantage, especially for patients who have traveled far distances. The on-site lab also eliminates the need to use outside commercial labs, which helps keep our fees low.
Affordable Dentures and Implants can be an ideal place to work; however, each office is owned by a different dentist. This may determine if you advance within the company, your pay raise, and overall office environment. The office environment I am a part of is poorly managed with a high turnover rate. Advancing within the company is not an option. The doctor does not monitor staff activities through out the day nor patient flow. Bonuses can be achieved if meeting and morning huddles were implemented. She does not encourage office cohesiveness or educating staff. Her leadership skills are poor and needs improving. Her drive is office chaos. This office needs leadership replacement to succeed.
The lower denture's teeth surface is even with the gum surface making the lower plate essentially flat. I mean there is no white tooth higher than the pink gum material. Not knowing the difference and trusting these so called "professionals," I have worn the partials for 8 years now and my bite is so off that my upper and lower front teeth butt against each other and has resulted in wearing them flat, taking the edge off them.
Treatment for lost teeth can be hard to find even in a metropolitan city like Dallas. Denture treatment and fitting needs to be done by a clinic with the highest level of skill and professionalism, like Dallas Dentures & Implants. Because we strive for a relaxing, comfortable environment and we treat our patients with a gentle care that is personalized to each individual, it is easy to forget that we also utilize cutting edge technology and the latest in prosthetic tooth replacement procedures. Add to that our 30 years of experience in medicine and it is easy to see why we are a leader in our field.
In any case, implant-supported dentures have several advantages over conventional dentures. They offer improved comfort due to less irritation of the gums, confidence due to less risk of slipping out, and appearance due to less plastic required for retention purposes. Patients with implant-supported dentures have increased chewing efficacy and can speak more clearly.
Resin-bonded bridge. Also called Maryland Bridge, this is sometimes considered for replacing front teeth that don't endure the biting and chewing demands of back teeth. It has wings on each side to attach to healthy, adjacent teeth but usually doesn't involve preparing, or grinding down, other teeth. A resin-bonded bridge looks and functions better than a removable denture but isn't as strong as fixed bridgework and typically doesn’t function or last nearly as long as dental implants.
If you’ve had a metal RPD, you know how cumbersome and heavy they can be. Dentists often see them damage remaining teeth and injure the inside of the mouth. Ultaire™ AKP partial dentures are 60% lighter than metal frames! The polymer was formulated to be lightweight as well as strong, similar to polymers used in hip implants. This creates partial dentures that are comfortable, durable and biocompatible, meaning they are safe to have in your body. Unlike metal, Ultaire™ AKP is non-toxic, non-irritating and nickel-free.
BEWARE: I have purchased the most expensive denture offered called the "Ultimate Fit Package". Upper denture only at $1200.00. This is my experience in this office. I went in for my first visit at Affordable Dentures in Shelbyville, with Dr. Marvo **, in October 2017. My upper teeth had already been extracted 2 months earlier at a local dentist office in Lewisburg. I spent a lot of time researching all of the available options online at Affordable Dentures in Shelbyville, TN., before contacting them to set up an appointment. I purposely chose the "Ultimate Fit Denture" because it was supposed to fit every contour of my mouth, the oral topography was touted as being "second-to-none" plus it comes with a 7 year warranty.
My teeth are never secure and have to reapply adhesive several times a day. Is this normal?? Think I'll find somewhere else for my lowers... get what you pay for. I was having severe pain in some of my lower teeth on that last visit, also. I asked for a Rx for antibiotics but Renee told me I did not need them. I now have an abscess and look like a squirrel. Thanks, Renee!! By the way, Renee, the mouth does NOT exaggerate!! Thanks for your great patient care!!!
Cold cured or cold pour dentures, also known as temporary dentures, do not look very natural, are not very durable, tend to be highly porous and are only used as a temporary expedient until a more permanent solution is found. These types of dentures are inferior and tend to cost much less due to their quick production time (usually minutes) and low cost materials. It is not suggested that a patient wear a cold cured denture for a long period of time, for they are prone to cracks and can break rather easily.
Review: My own experience with Todd Young has been that he does care about results and about how his work affects me as a patient. I have some pre-existing medical conditions that made fitting me with dentures very challenging and Todd has shown himself to be a perfectionist in his effort to get my dentures ”just right” and working for me. He and his staff have explained every step of the process and answered any questions I’ve had. In addition, I’ve seen Todd go above and beyond what I had expected, especially in terms of dealing with a difficult surgery I’d undergone at another dental practice — he did his best to correct a situation that he had nothing to do with creating! I wasn’t expecting that kind of support and both my wife and I are very grateful to Todd for his help. And his staff are certainly friendly and courteous. It’s hard for me to believe that the negative reviews posted here aren’t just from someone who has to have some complaint about anything and everything. I can say that in the many visits I’ve made to Todd because of my special fitting needs, I have never heard another customer complain about ANYTHING they experienced with Todd and his staff.
Always remove your dentures before sleeping to avoid damaging them, dislodging them, and to give your gums some time to relax. Submerge your dentures fully in warm, but not hot, water to keep them from drying out and becoming misshapen. Only use denture soaking solution if your dentures do not have metal components as the solution can tarnish the metal.
Implants: An implant is a metal post that is inserted into the bone of the upper or lower jaw. This post is then used to replace a single tooth by attaching a crown to it, or multiple teeth by attaching a bridge to multiple implants. Implants are the most expensive option for tooth replacement, but implants simulate natural teeth better than any of the other options.
Like a bridge, partial dentures rest on surrounding teeth to fill in the gaps where one or more teeth are missing. But unlike a bridge, partial dentures are fully removable by the wearer. Partials are affordable alternatives to other types of dental prosthetics and are custom-made to blend in with each patient’s natural teeth. It takes a little time to adapt to new partials, but many people find that they reclaim much of their original function and aesthetics with partial dentures in place.
Dentures not only improve the appearance of a smile that has multiple missing teeth, but they also keep the structure of the mouth sound by supporting the structures around the cheeks and lips. Dentures also make it possible to eat foods that require chewing, making it possible to keep your diet the same and ensure that you are properly nourished. Lastly, dentures are a viable solution to replace teeth that are causing serious pain and oral health issues, such as those with rotted roots or severe damage. Having dentures fitted means that troublesome teeth are eliminated and replaced with a strong and beautiful alternative.
