The fabrication of a set of complete dentures is a challenge for any dentist/denturist. There are many axioms in the production of dentures that must be understood; ignorance of one axiom can lead to failure of the denture. In the vast majority of cases, complete dentures should be comfortable soon after insertion, although almost always at least two adjustment visits are necessary to remove the cause of sore spots. One of the most critical aspects of dentures is that the impression of the denture must be perfectly made and used with perfect technique to make an accurate model of the patient's edentulous (toothless) gums. The dentist or denturist must use a process called border molding to ensure that the denture flanges are properly extended. An array of problems may occur if the final impression of the denture is not made properly. It takes considerable patience and experience for a dentist to know how to make a denture, and for this reason it may be in the patient's best interest to seek a specialist, either a prosthodontist or denturist, to make the denture. A denturist is a trained and licensed professional who sees patients in need of dentures, partials, relines or repairs. A denturist not only takes the impression, but makes the entire denture in his or her own laboratory. The denturist then schedules a date for the delivery of the finished dentures to the patient. A general dentist may do a good job making dentures, but only if he or she is meticulous and experienced. Many dentists no longer make dentures themselves. but instead take an impression of the patients' mouth and then either send the impressions to a dental laboratory, which could be anywhere in the world, or send the patient to a denturist. Once the laboratory receives dental impressions of the patient's mouth, the laboratory creates plaster molds from them. The laboratory uses the molds to create the wax rims used to register the patient's bite. These wax rims are returned to the dentist, who uses them to register the patient's bite. The dentist may assist the patient in choosing the correct size of teeth for the dentures, or simply make the selection himself. Once bite registration is completed and the teeth are selected for the dentures, the wax rim is usually returned to the dental laboratory in order to have the denture teeth set into the wax. Once the teeth are set into the wax rim, the result is a prefinished denture that looks almost like the finished product. This prefinished denture is usually returned to the dentist's office and the patient usually has a chance to approve the setup (for immediate or standard dentures) or to try the denture before it is finished. After approval by the patient, the dentist returns the pre-denture to the laboratory for final processing. The finished denture is then returned to the dentist's office for delivery to the patient.
I will be having Dr. Athari do my 7th dental implant. I have had 6 implants done at various locations ... family dentist, oral surgeon, and local dental school over the past 7 years. I was impressed with the clean modern office, friendly professional staff, and the price. Dr. Athari and his assistant made me feel relaxed and comfortable. They presented and explained to me a couple of treatment plans along with the pros and cons of each ... I chose to have another implant. I am confident that Dr. Athari and his staff will make my tooth beautiful and functional again.
Retention is the principle that describes how well the denture is prevented from moving vertically in the opposite direction of insertion. The better the topographical mimicry of the intaglio (interior) surface of the denture base to the surface of the underlying mucosa, the better the retention will be (in removable partial dentures, the clasps are a major provider of retention), as surface tension, suction and friction will aid in keeping the denture base from breaking intimate contact with the mucosal surface. It is important to note that the most critical element in the retentive design of a maxillary complete denture is a complete and total border seal (complete peripheral seal) in order to achieve 'suction'. The border seal is composed of the edges of the anterior and lateral aspects and the posterior palatal seal. The posterior palatal seal design is accomplished by covering the entire hard palate and extending not beyond the soft palate and ending 1–2 mm from the vibrating line.
If I had to find one negative about the office, it would be the wait times. On our first visit, one woman in the waiting room said she'd been waiting 30+ minutes. It took a day to get a call back to schedule. We waited a little while in the office too. However, when you consider that they're working with people like the person I brought in, and that it's totally impossible to predict the needs and behaviors of some of the patients who go in there, it's totally understandable. I have no doubt they took a little longer because they were treating someone else exactly as they treated us- with patience and understanding. That's worth waiting for. So, if you do go, be prepared for some short delays, but also know why those delays happen. Overall, they work like a well-oiled machine. We got to meet the whole team, including their on-site lab techs. Every single person met us with a smile and kind words. I cannot thank Dr. Athari enough for creating an environment like this.
Only his assistant - she did his job great. But I didn't pay her. I paid him. He nonchalantly walked down the hall not even stopping to take a look at my jawline that's showing. I love my immediate dentures. But the money I paid. I think I should have a decent dentist that is interested in helping his patient with care. My Medicaid dentist treats me better and he doesn't get paid so much.
Implants: An implant is a metal post that is inserted into the bone of the upper or lower jaw. This post is then used to replace a single tooth by attaching a crown to it, or multiple teeth by attaching a bridge to multiple implants. Implants are the most expensive option for tooth replacement, but implants simulate natural teeth better than any of the other options.
For patients with multiple missing teeth – Having multiple missing teeth would mean that speech could be impaired and chewing would be much more difficult. Also, a patient could experience low-self confidence and consciousness over their appearance. Full and partial dentures can help ease those burdens and give the patients a new smile and a new outlook in life.
When dentures no longer fit well, the correct action is to seek follow-up care. Denture adhesive is recommended for dentures, even well fitting ones. Adhesives improve retention, seal the borders to prevent food from slipping under, and cusion the soft tissues from the rigid acrylic. Using denture adhesive may improve the fit, but it tends to work best when only a small amount is used. Covering the entire denture fitting surface in adhesive makes it stay in less well. Adhesives may compensate for gradual loosening of a denture, but it is only a temporary solution; it does not solve the problem. Fortunately, dentures can often be relined with relining materials to improve the fit, and this process costs less than creation of new dentures. Overall, a well-made denture could last about 5 years (or more), but this is different for every patient.
Have your dentist evaluate your needs, as partial dentures are used if there are a larger number of teeth that need to be replaced and if there is a risk of more tooth loss while bridges work best for smaller gaps on the same side of your mouth. Additionally, partial dentures are easier to adjust and repair and are usually less expensive. However, partial dentures can become broken or lost while bridges remain safely fixed to your teeth.
The process of fabricating a denture usually begins with an initial dental impression of the maxillary and mandibular ridges. Standard impression materials are used during the process. The initial impression is used to create a simple stone model that represents the maxillary and mandibular arches of the patient's mouth. This is not a detailed impression at this stage. Once the initial impression is taken, the stone model is used to create a 'Custom Impression Tray' which is used to take a second and much more detailed and accurate impression of the patient's maxillary and mandibular ridges. Polyvinylsiloxane impression material is one of several very accurate impression materials used when the final impression is taken of the maxillary and mandibular ridges. A wax rim is fabricated to assist the dentist or denturist in establishing the vertical dimension of occlusion. After this, a bite registration is created to marry the position of one arch to the other.
A full arch denture is a removable tooth replacement option for those who need all their teeth replaced. They can be crafted to provide the characteristics (tooth shape and color) the patient desires. Advances have been made in the materials used for dentures and in the way they are designed. If you already have dentures (partial or full arch) you may be experiencing a loose fit or denture slipping. This can lead to gum sores, can affect your chewing and your speech and decrease your confidence when speaking and/or laughing with others. We can help restore your dentures to the correct fit.
I have both upper and lower dentures, but the uppers, which are newer, are very white compared to the bottoms. It will cost me a lot (like $500) to replace them, but I want them to match. Can I whiten my dentures?Answer: It is not possible to whiten dentures like natural teeth because dentures are made of plastic. To minimize staining, properly clean your dentures daily to remove food and plaque bacteria. Brushing with a denture brush or soft toothbrush will prevent dentures from becoming permanently stained and will keep your mouth healthy. Moisten the brush and apply a nonabrasive denture paste (regular toothpaste is too abrasive) or use liquid soap. Brush every surface, inside and out, scrubbing gently. A variety of over-the-counter denture-cleanser products may be safely used (by following the manufacturer’s instructions) to remove some stains. You may also consider soaking your dentures in a cup of water with a teaspoon of household bleach, but be sure to rinse them off well before putting them back in your mouth. When cleaning your dentures, be careful not to drop them as they can break. You should clean your dentures over a sink that is filled with water or has a washcloth in place to prevent the dentures from breaking should you drop them while cleaning. More stubborn stains may require removal by your dentist or prosthodontist, a specialist in denture care and maintenance. To locate a prosthodontist near you, visit www.gotoapro.org. Response provided by the American College of Prosthodontists. Back to top
A mid-priced (and better quality) heat cured denture typically costs $500–$1,500 per denture or $1,000-$3,000 for a complete set. The teeth look much more natural and are much longer lasting than cold cured or temporary dentures. In many cases, they may be tried out before they are finished to ensure that all the teeth occlude (meet) properly and look esthetically pleasing. These usually come with a 90-day to two-year warranty and in some cases a money-back guarantee if the customer is not satisfied. In some cases, the cost of subsequent adjustments to the dentures is included.
Dentures must be handled with great care and placed in a container of water or denture cleaner when not being worn. They should never be placed in hot water, for they can be damaged or warped. They must be cleaned daily using a soft toothbrush with soap and water. The mouth should be rinsed daily without the dentures in place to clean off any plaque and reduce the risk of infection like candidiasis.
