The first visit was nice enough. The receptionists were polite even if they didn't seem to have a clue what they were doing. The only bad experience I had was a very rude lady who dealt with the mountains of paperwork I was filling out. You could clearly tell that she hated her job. With that being said you run into unpleasant people every day and unless you are incredibly thin skinned it shouldn't bother you. It was the least of my problems.
If you've recently lost your teeth and received an immediate denture, it's normal to find some tissue shrinkage and bone loss occurring. Therefore, in several months you may find that your immediate dentures no longer fit well. You will have two choices at this point: You can have your immediate (temporary) dentures re-lined. This means that material is added under the denture's base to better conform to the new contours of your alveolar ridge. A better option is to move to a set of conventional full dentures, which will last longer and fit better. With proper care, dentures offer a functional, aesthetic and economical solution to the problem of tooth loss.

Dentures that fit well during the first few years after creation will not necessarily fit well for the rest of the wearer's lifetime. This is because the bone and mucosa of the mouth are living tissues, which are dynamic over decades. Bone remodeling never stops in living bone. Edentulous jaw ridges tend to resorb progressively over the years, especially the alveolar ridge of the lower jaw. Mucosa reacts to being chronically rubbed by the dentures. Poorly fitting dentures hasten both of those processes compared to the rates with well-fitting dentures. Poor fitting dentures may also lead to the development of conditions such as epulis fissuratum. In addition, the occlusion (chewing surfaces of the teeth) tends to wear away over time, which reduces chewing efficacy and decreases the vertical dimension of occlusion, (the "open-ness" of the jaws and mouth).


Our office is independently owned and operated, but we have the resources of a national network of implant and denture providers. With our on-site lab, we’re able to deliver same-day results in many cases. We strive to maintain lower rates by avoiding off-site lab needs and relying on our own highly trained technicians. Financing is available for qualified borrowers, and we do accept some insurance plans. If we’re not in your network, then we can provide you with a walk-out statement so you can expedite your own claim.
WORST PLACE IN THE WORLD TO GO TO BELIEVE ME. 1 YEAR AGO 04/09/2017 THEY PULLED 8 TEETH. That's where everything started to go south. I purchased the ultimate dentures. So first you start off with economy set. 5 plates later nothing fit, Some bizarre looking teeth. One set the mid-line was very crooked. What a joke. (It looked as I was walking sideways.) I kept hearing different excuses on why they did not fit. Some blamed my jaw bone (which is not unique). Some blamed the lab. One of the dentists said on plated number 3 before it came out of the cup, "Oh good JR made them," so of course I asked, he said "when things come out of the lab with the initials JR on them I can breathe easier." I'm thinking, "Great only 1 guy in the lab who does a good job."
Retention is the principle that describes how well the denture is prevented from moving vertically in the opposite direction of insertion. The better the topographical mimicry of the intaglio (interior) surface of the denture base to the surface of the underlying mucosa, the better the retention will be (in removable partial dentures, the clasps are a major provider of retention), as surface tension, suction and friction will aid in keeping the denture base from breaking intimate contact with the mucosal surface. It is important to note that the most critical element in the retentive design of a maxillary complete denture is a complete and total border seal (complete peripheral seal) in order to achieve 'suction'. The border seal is composed of the edges of the anterior and lateral aspects and the posterior palatal seal. The posterior palatal seal design is accomplished by covering the entire hard palate and extending not beyond the soft palate and ending 1–2 mm from the vibrating line.
An implant-supported denture often provides a better fit on the bottom jaw than conventional dentures. In many cases, an implant overdenture on the bottom is paired with a conventional top denture. It can take several months to learn to eat and speak while wearing dentures, and they require daily cleaning. SimpleStepsDental.com lists tips for living with dentures[4] .
The front office staff does not greet you or ask how they can help you when you come it they look at you and watch you stand at an empty desk until a patient sitting in the lobby advises the customer where to go. The staff in the back are excellent they keep you informed and will try to assist any way they can. The Dr was great helping me as a patient however the patient does not need to hear or see him reprimand the assistant when they mess up or do something wrong. I don't need to know something is incorrectly done. Now as for as my service I had a horrible experience I arrived on time but because they didnt have my paper work told me I would have to wait an hour and half til the office who had the info open I told them I can go home and get my copy before the office opens. My upper denture was fitted a nice fit but when I returned my upper were crooked and the left side looked like baby teeth ere used then adult teeth on the right side ...and angle is very obvious. The whole process time it took to make it was something that could not be correct the same day because a whole new denture need to be made. In the meantime I can wear the crooked one until my next appointment woke up this morning my more is so sore from eating and the rubbing of the new denture on my gum line A very unpleasant experience
For most cases, this office is well equipped and able to be of great benefit. If you have a difficult case, you may need someone with a greater level of ability. I am unfortunately unable to rate this practice very high, while mine is a delicate and difficult case, I was left to find another professional to help me complete my implant process that was started with this office.
Processing a denture is usually performed using a lost-wax technique whereby the form of the final denture, including the acrylic denture teeth, is invested in stone. This investment is then heated, and when it melts the wax is removed through a spruing channel. The remaining cavity is then either filled by forced injection or pouring in the uncured denture acrylic, which is either a heat cured or cold-cured type. During the processing period, heat cured acrylics—also called permanent denture acrylics—go through a process called polymerization, causing the acrylic materials to bond very tightly and taking several hours to complete. After a curing period, the stone investment is removed, the acrylic is polished, and the denture is complete. The end result is a denture that looks much more natural, is much stronger and more durable than a cold cured temporary denture, resists stains and odors, and will last for many years.
Occasionally, denture wearers may use adhesives. Adhesives come in many forms: creams, powders, pads/wafers, strips or liquids. If you use one of these products, read the instructions, and use them exactly as directed. Your dentist can recommend appropriate cleansers and adhesives; look for products with the ADA Seal of Acceptance. Products with the ADA Seal have been evaluated for safety and effectiveness.
I will be having Dr. Athari do my 7th dental implant.  I have had 6 implants done at various locations ... family dentist, oral surgeon, and local dental school over the past 7 years.   I was impressed with the clean modern office, friendly professional staff, and the price.  Dr. Athari and his assistant made me feel relaxed and comfortable.  They presented and explained to me a couple of treatment plans along with the pros and cons of each ... I chose to have another implant.  I am confident that Dr. Athari and his staff will make my tooth beautiful and functional again.
I had the procedure done about 5 years ago and I'm down to one implant left. After the other 3 failed, I can say that one of them was my fault but the others I just feel were not seated properly and from what I researched I think 2 of my implants the dentist burned the bones so they inevitably failed. In fact the 1st one failed within 6 months and I knew walking out the day of the procedure something wasn't right with it but I was told it was just "healing".

Dr. Athari's dental center has an on-site dental lab that fabricates new dentures and provides repairs and relines, often with same-day service. Being able to provide dentures in a day is a significant advantage, especially for patients who have traveled far distances to visit the practice. The on-site lab also eliminates the need to use outside commercial labs, which helps keep our fees low.


Under the direction of dentist Clark Damon, Texas Denture Clinic and Implant Center has become the dental implant destination in Fort Worth, TX and Richardson, Tx. As a true Dental Implant Center, rather than visiting a separate practice for each phase of your dental implant treatment, you can receive high-quality care from start to finish in a single office using the latest techniques and technology. 
Extra care must be taken when handling dentures or partials because they are delicate and could break when dropped. It is also important to prevent dentures or partials from drying out so place them in the specified soaking solution or plain water when not in use. Avoid hot water because this will cause the denture to lose its shape. Brush dentures daily to dislodge food deposits and prevent them from becoming stained.
Complete dentures are made when gums are restored to a healthy condition and sufficient time has passed for healing. Complete dentures replace all teeth in the upper or lower jaws of the mouth. Gums will naturally shrink through the healing process of tooth loss, which normally takes from six to 12 months. During this period the immediate dentures may require adjustments to accommodate the changes in the gums and underlying bone structure. This could include soft and hard relining procedures.
The process of receiving your customized partial dentures is relatively easy when compared to more invasive replacement procedures that take a long time, like dental implants. The creation and fitting of your partial dentures will take a few weeks at most. We will first make impressions and molds of your remaining teeth, gums, and jaw that will help us create partial dentures that fit you perfectly.

Later that afternoon I came back to have 16 teeth extracted. I got to the office and waited about 30 minutes before I was seen. I got to the back and began injections. After this I went to a full blown panic attack and came close to passing out. The one positive is the dentist who was working on me took it in stride. I wasn't treated disrespectfully and after about 30 minutes the panic subsided and she was able to finish my injections and begin pulling teeth.
Temporary or interim appliances serve many useful purposes and are often an integral part of a prosthetic treatment plan. These appliances can be designed to be either fixed or removable. This simple appliance is excellent for temporary replacement of front teeth while the patient is waiting for a permanent bridge, a partial, or implants. This removable interim bridge is made of a clear vacuum-formed material. The appliance simply snaps into place.
My wife started her denture procedure at the Bethany Home office. On November 14th she had three implants installed. Had an appoint to get the stiches out in 3 weeks. Got a call the day before our appointment and they cancelled because they did not have doctor. Since starting in June we have been thru three doctors. There is currently no doctor at that office. When I called there corporate office they referred me to the Sun City Office. Sun City gave an appointment for Wednesday at 11 and called back within the hour to cancel and said they were not taking Bethany Home patients till after the 1st of the year. Adele at corporate worked hard to get us set up with the Mesa office. Said they would call within the hour and they did. Darb called (supper nice lady) and gave us an appoint for the very next day. When we got to the office all of the people were amazing. They made us feel very welcomed and we are excited about having them finish the procedure. I recommend Affordable Dentures. Save yourself the time and go right to the Mesa office.
Since then, the affiliated network of Affordable Dentures & Implants affiliated practices has steadily grown from coast to coast - delivering "A Smile For Everyone" through consistent, knowledgeable care in extractions, dentures and implants at competitive prices. We continue to support people in need of dental treatment through Mission of Mercy events and other charitable efforts.
Affordable Dentures, Franklin, Indiana, should be closed and prohibited from operating in the state. An investigation of this office and the qualifications of its staff are imperative. When I paid $1990 on my credit card to the assistant named "**"€, I asked for a copy of my file. **'s reply was, "What do you need it for?" I said I have the right to access my medical records. She said, "We don'€™t do that."€ Affordable Dentures willfully violates HIPPA law.
A trip to the dentist should leave you feeling as though your smile is refreshed and brand-new. However, many people dread visiting the dentist, due to worry about the cost or the frustration of taking time out of their day to make an appointment. It’s important to find a dental office that understands the needs of your budget. DDS Dentures + Implant Solutions offers the comprehensive range of care you need, at a price you can afford. With our “price-beat guarantee,” we promise we can beat any licensed dentist’s treatment plan price by at least 10 percent. When you need your smile restored, with implants, bridges, or dentures, the process can take anywhere from weeks to months. But what if you could have a brand-new smile with fewer visits? Thanks to an in-house dental lab, DDS Dentures + Implant Solutions is able to make new implants, bridges, and dentures efficiently. And less time spent at the dentist means more time to spend on things you enjoy. If you live in Arkansas, Louisiana, Mississippi, Missouri, Oklahoma, Tennessee or Texas, this convenient and affordable dental care is only a phone call or visit away. Find a DDS Dentures + Implant Solutions location near you here, and let us show you how a trip to the dentist could be something to smile about.
The main alternatives are a fixed bridge or a dental implant. A dental bridge is made by putting crowns on the teeth at either side of the gap, and then joining these two crowns together by placing a false tooth in the space. This is all made in the laboratory and then the pieces are cemented into place with special adhesives. The bridge can't be removed.
Dr. Clark Damon has been in practice since 2011. Over the years, his practice has helped thousands to experience renewed oral health. He enjoys transforming the lives of patients with the latest in dental implant treatments. As a lecturer for Nobel Biocare, he understands the treatment rationale, science, and prognosis at a high level. Dr. Damon educates other Dentists about the Benefits of Full Arch Implant treatment on a monthly basis. 
My wife started her denture procedure at the Bethany Home office. On November 14th she had three implants installed. Had an appoint to get the stiches out in 3 weeks. Got a call the day before our appointment and they cancelled because they did not have  doctor. Since starting in June we have been thru three doctors. There is currently no doctor at that office. When I called there corporate office they referred me to the Sun City Office. Sun City gave an appointment for Wednesday at 11 and called back within the hour to cancel and said they were not taking Bethany Home patients till after the 1st of the year. Adele at corporate worked hard to get us set up with the Mesa office. Said they would call within the hour and they did. Darb called (supper nice lady) and gave us an appoint for the very next day. When we got to the office all of the people were amazing. They made us feel very welcomed and we are excited about having them finish the procedure. I recommend Affordable Dentures. Save yourself the time and go right to the Mesa office.

Needless to say that I am going to a different dentist. A man who has been in this community for a long time and has a spotless office with people who treat their patients with respect. Charges more, but worth it to be treated right. I have gone to Affordable Dentures for a while because of the pricing but every time I went, new doctor, new office people, but these people at my last time there, they are really nasty. I am also going to contact the board of health because while I was sitting in the dental chair I looked up at the light and it was filthy, nasty with what looked like old spit or blood or whatever it was. It was not clean in my opinion.
Remember: You can do serious harm to your denture and to your health by trying to adjust or repair your denture. Using a do-it-yourself kit can damage the appliance beyond repair. Glues sold over-the-counter often contain harmful chemicals and should not be used on a denture. If your denture breaks, cracks or chips, or if one of the teeth becomes loose, call your dentist immediately. In many cases, dentists can make necessary adjustments or repairs, often on the same day. Complicated repairs may require that the denture be sent to a special dental laboratory. 
Since there is nothing for the Conventional Denture to latch onto, this type of appliance generally has more retentive issues as compared to an implant-retained denture. The latter is held in place by strategic placement of dental implants that are embedded into the patient’s jaw, providing greater stability and strength. The increased stability also means optimum comfort and functionality of the new prosthetic teeth. Go to our webpage Dentures Brisbane CBD for further reading on Full Dentures.
Medically, the consequences of not replacing missing teeth include unwanted and unhealthy nutritional changes. There are also potential risks of diabetes, obesity, heart disease, depression, and an increase in the likelihood of developing cancer. These are all prominent health risks that are avoidable by providing a dental structure with partial dentures or another quality tooth replacement option.

This is long,but I writting this to hopefully save someone else from going through this,self pay people are at the mercy of blood sucking dentist.Well,I carefully compared several NC Affordable Dentures,I read reviews from many sources.The one near me is pretty bad,went many years ago and the currant reviews are down right scary,couple with a serious fear of dentist,did not want to put myself through that again. Soooo the search was on,after being quoted 632.00$??? at DentalWorks!! Who the he'll can afford that out of pocket,so after reading the reviews for this location I called asked questions,asked what I needed to bring along with time to be there.Then I read website to make sure everything was a go.Had x-rays sent over along with bringing a copy myself incase something went wrong.Website&Receptionist both confirmed needing to arrive by 7:30am.Okay,I cancelled one of my accounts (means I lost money),woke up at 4:30am then drove hour n half to A.D. Apex Highway Location.Stood in line,filled out forms,handed over X-Rays,took a seat.After watching people come in at 10 am be seen before me,denture customers get teeth pulled come back sit down in lobby again,then be called back for fittings or whatever of course started to get anxious.I just needed one extraction.There was a very loud girl there who had to have one tooth pulled as well.At the four hour mark,she asked them what was going on.Receptionist tells her denture people should all be done being treated by 3pm.So she may or may not be treated sooner.What?????Been waiting 4hours,drove almost two to get there with less then 5 hours sleep to make sure I'd be on time and it's going to be another 4hour wait??? and then that's not guaranteed.So I asked receptionist if this was the case,told her my issue,she just looked at me blankly"yep"..This information is no where on website,I told her on phone what I needed asked if there was anything I needed to know.She even said for treatments had to be there at 7:30am.NO WHERE DOES IT STATE JUST EXTRACTIONS WILL BE DONE AFTER EVERYTHING ELSE.The whole ordeal was just inexcusable.I got my x-rays and left,I am now sitting with a abscessed tooth waiting to make an appointment on Monday at one of them blood sucking offices,got small loan because the price of extractions is inexcusable too.You know what though,I Will expect it,I will also be treated better,will not automatically assume I have no other options but them so they can treat me however an if they mess up oh well.How would these ppl like to be treated this way,this issue may sound insufficient but the fact is I lost a day of my personal time along with a days work and still need to see a dentist because of thier mistake not mine. You slap the word affordable on a business,make em line up,play by your rules or else,because you know they cannot afford it anywhere else,its borderline cruel.I'm positive there has got to be a hundred other poor souls that will go through something similar to me,I if I can help one person avoid it,good!!..
The lower denture's teeth surface is even with the gum surface making the lower plate essentially flat. I mean there is no white tooth higher than the pink gum material. Not knowing the difference and trusting these so called "professionals," I have worn the partials for 8 years now and my bite is so off that my upper and lower front teeth butt against each other and has resulted in wearing them flat, taking the edge off them.

Recently, I have been breaking and losing my teeth. I had partials, but I have never had dentures, and my husband is encouraging me to finally get them. What is the cost if I have no insurance, and how long does it take for the teeth to be removed and replaced with dentures?Answer: Denture fees vary widely based on location. The best way to determine fees for service is to visit with your dentist or prosthodontist and discuss the care you may need. You may also contact your state or local dental society to find out if the organization has any resources for the public related to the cost of dental services. You may want to seek the care of a prosthodontist, a dentist with three years of training beyond dental school who specializes in the care and maintenance of dentures. To locate a prosthodontist near you, visit www.gotoapro.org. Temporary dentures can be placed the same day as your teeth are removed. Remember that once the teeth are gone, the jaws begin to shrink. Although this shrinkage is dramatic for the first six months and then slows down, you must remember that it is an ongoing, long-term concern for denture wearers and affects the fit of the dentures during the years. Temporary dentures will help your mouth look normal, but after wearing the temporary dentures for six months, they will need to be remade or relined. It is important that you continue to have the fit of your dentures evaluated on a regular basis and remade as needed to maintain their function and appearance.Response provided by the American College of Prosthodontists. Back to top
Since then, the affiliated network of Affordable Dentures & Implants affiliated practices has steadily grown from coast to coast - delivering "A Smile For Everyone" through consistent, knowledgeable care in extractions, dentures and implants at competitive prices. We continue to support people in need of dental treatment through Mission of Mercy events and other charitable efforts.
For patients with multiple missing teeth – Having multiple missing teeth would mean that speech could be impaired and chewing would be much more difficult. Also, a patient could experience low-self confidence and consciousness over their appearance. Full and partial dentures can help ease those burdens and give the patients a new smile and a new outlook in life.
Dentures are mainly made from acrylic due to the ease of material manipulation and likeness to intra-oral tissues, ie. gums. Most dentures made are fabricated from heat-cured acrylic polymethyl methacrylate and rubber-reinforced polymethyl methacrylate.[3] Coloring agents and synthetic fibers are added to obtain the tissue-like shade, and to mimic the small capillaries of the oral mucosa, respectively.[4] However, dentures made from acrylic can be fragile and fracture easily if the patient has trouble adapting neuromuscular control. This can be overcome by reinforcing the denture base with cobalt chromium (Co-Cr). They are often thinner (therefore more comfortable) and stronger (to prevent repeating fractures).

When you are missing one or more teeth, the bite pressures shift in your mouth. Other teeth may begin to move to compensate for the “gap” in your bite, and you may experience shrinking of both the soft tissues and the supporting bone near your missing teeth. This can alter your physical appearance and can lead to subsequent problems with your other teeth. A partial denture keeps the underlying structures of your mouth – your gums, jawbone, facial muscles, etc. – active and engaged. It helps prevent further shifting of the other teeth in your mouth, while giving you the confidence of having a beautiful, complete smile.

I will ask to see the dentist when I return and tell him that if the permanent denture is not going to be formed with any more care than this, I want the remainder of my money back and I will go elsewhere. Even for an "affordable denture" the quality of this temporary is not worth the mouth pain and I will never be able to wear it for 6mo to 1yr while I wait for the permanent one. If you can afford better, then please do, as you will not be happy with the poor quality results.
To clarify, denture-supported implants normally require four implants per arch to secure these bridges. The aim of this inaccurate narrative is to get you to call in using prices and terms that lead you to believe you’ve discovered an “affordable” denture implant solution. Inevitably, sticker shock and disappointment sets in after you find out the true cost.
anything else they could help her with they would refund her . My mother explained she couldn't t eat with bottom dentures. They sent her home with no teeth.  Very unprofessional. Elderly people need extra patience. She had arranged rides to their office several times to correct problem ( she lived 40 miles away ) . Very very unhappy with this company.
High-end dentures usually involve a great measure of dental artistry and utilize materials which simulate the natural look and color of teeth and gums to the highest degree possible. The teeth, normally made from composite acrylic resins, are designed to last a long time and often include a warranty against wear and tear, such as chipping and cracking. These life-like dentures can cost anywhere from $1,000 to $5,000 for a full set (upper and lower jaw).

Dentures are generally worn during the day and taken out at night to give the oral tissues time to relax. During the first few days after receiving the denture, however, it needs to remain in the mouth even when sleeping to best identify areas that need to be adjusted. This is especially important after receiving an immediate denture, for the gum tissues will swell after the teeth are extracted or lost and then may not permit the denture to be reinserted if taken out.
The process of getting dentures requires several appointments, usually over a period of several weeks.  Highly accurate impressions (molds) and measurements are taken and used to create your custom denture.  Several “try-in” appointments may be necessary to ensure proper shape, color, and fit.  At the final appointment, your dentist will precisely adjust and place the completed denture, ensuring a natural and comfortable fit.
When we say we’re changing the face of dentistry, we mean it in every sense. Wait until you see the difference that same-day service makes. It differentiates AD&I affiliated practices and Affordable Care and, most important of all, transforms the lives of patients. So you can expect to see smiles and to hear how you and your teammates have impacted their lives. And isn’t that why you do what you do?

Very poor quality denture. has rough surfaces all over, was not polished, Left corner of my mouth is injured from use of a too large impression tray. I have sores in my mouth and have gone back to using my old partial. I would not recommend Affordable Dentures although their prices are unbeatable. it is unfortunate that they do not produce a quality product.
Patients can become entirely edentulous (without teeth) for many reasons, the most prevalent being removal due to dental disease typically relating to oral flora control, i.e., periodontal disease and tooth decay. Other reasons include pregnancy, tooth developmental defects caused by severe malnutrition, genetic defects such as dentinogenesis imperfecta, trauma, or drug use.

The process of fabricating a denture usually begins with an initial dental impression of the maxillary and mandibular ridges. Standard impression materials are used during the process. The initial impression is used to create a simple stone model that represents the maxillary and mandibular arches of the patient's mouth. This is not a detailed impression at this stage. Once the initial impression is taken, the stone model is used to create a 'Custom Impression Tray' which is used to take a second and much more detailed and accurate impression of the patient's maxillary and mandibular ridges. Polyvinylsiloxane impression material is one of several very accurate impression materials used when the final impression is taken of the maxillary and mandibular ridges. A wax rim is fabricated to assist the dentist or denturist in establishing the vertical dimension of occlusion. After this, a bite registration is created to marry the position of one arch to the other.
Treatment for lost teeth can be hard to find even in a metropolitan city like Dallas. Denture treatment and fitting needs to be done by a clinic with the highest level of skill and professionalism, like Dallas Dentures & Implants. Because we strive for a relaxing, comfortable environment and we treat our patients with a gentle care that is personalized to each individual, it is easy to forget that we also utilize cutting edge technology and the latest in prosthetic tooth replacement procedures. Add to that our 30 years of experience in medicine and it is easy to see why we are a leader in our field.
If needed, patients can get a full set of upper or lower dentures, but many patients get partial removable dentures and keep as many of their natural teeth as possible. Partial dentures can replace one or more teeth in the upper or lower set, allowing spaces for natural teeth. In other words, the teeth in partial dentures do not need to be next to each other.
Partial dentures are designed to give you all the form and function of natural teeth. It may take some time for you to adjust to your new partial denture, but eventually, you will be able to enjoy most of the foods that you love. You’ll want to begin with soft foods and should take care to chew slowly and on both sides of the mouth. Particularly hard or sticky foods should be avoided.
Partial Dentures: Partial dentures can either be made with a plastic base or a metal framework that supports the number of teeth that need to be replaced. It is held in the mouth by using clasps and rests that are carefully adapted around the natural teeth. The partial denture that uses a metal framework is the traditional design, due to the rigidity and strength of the metal. Plastic partial dentures have normally been used as emergency or temporary replacements of missing teeth, allowing the gums and bone to heal before a definitive restorative solution is obtained. Recently, however, various materials such as Valplast have been developed to provide durable, flexible alternatives in certain situations.
×