Dr. Athari's dental center has an on-site dental lab that fabricates new dentures and provides repairs and relines, often with same-day service. Being able to provide dentures in a day is a significant advantage, especially for patients who have traveled far distances to visit the practice. The on-site lab also eliminates the need to use outside commercial labs, which helps keep our fees low.

On the cheap or “discount denture” end, you get units with premade fits that often look artificial. Less expensive sets are generally made with lower quality materials and their warranties reflect that. In the end, cheap dentures lack the desired lifelike look, are more prone to crack or break outright, may have poor bite alignment, and are typically less comfortable.

The fabrication of a set of complete dentures is a challenge for any dentist/denturist. There are many axioms in the production of dentures that must be understood; ignorance of one axiom can lead to failure of the denture. In the vast majority of cases, complete dentures should be comfortable soon after insertion, although almost always at least two adjustment visits are necessary to remove the cause of sore spots. One of the most critical aspects of dentures is that the impression of the denture must be perfectly made and used with perfect technique to make an accurate model of the patient's edentulous (toothless) gums. The dentist or denturist must use a process called border molding to ensure that the denture flanges are properly extended. An array of problems may occur if the final impression of the denture is not made properly. It takes considerable patience and experience for a dentist to know how to make a denture, and for this reason it may be in the patient's best interest to seek a specialist, either a prosthodontist or denturist, to make the denture. A denturist is a trained and licensed professional who sees patients in need of dentures, partials, relines or repairs. A denturist not only takes the impression, but makes the entire denture in his or her own laboratory. The denturist then schedules a date for the delivery of the finished dentures to the patient. A general dentist may do a good job making dentures, but only if he or she is meticulous and experienced. Many dentists no longer make dentures themselves. but instead take an impression of the patients' mouth and then either send the impressions to a dental laboratory, which could be anywhere in the world, or send the patient to a denturist. Once the laboratory receives dental impressions of the patient's mouth, the laboratory creates plaster molds from them. The laboratory uses the molds to create the wax rims used to register the patient's bite. These wax rims are returned to the dentist, who uses them to register the patient's bite. The dentist may assist the patient in choosing the correct size of teeth for the dentures, or simply make the selection himself. Once bite registration is completed and the teeth are selected for the dentures, the wax rim is usually returned to the dental laboratory in order to have the denture teeth set into the wax. Once the teeth are set into the wax rim, the result is a prefinished denture that looks almost like the finished product. This prefinished denture is usually returned to the dentist's office and the patient usually has a chance to approve the setup (for immediate or standard dentures) or to try the denture before it is finished. After approval by the patient, the dentist returns the pre-denture to the laboratory for final processing. The finished denture is then returned to the dentist's office for delivery to the patient.
While we strive to offer the highest quality of care possible, we know that a person who can’t afford treatment is not going to come in, regardless of how great a job we do. That is why we work with our patients as much as we possibly can. We want to make sure that they get the care they need and that they get it a price they can afford. To that end, we offer significant discounts over other care providers. Additionally, we are always happy to help set up a flexible financing program with our clients.
If you have ever wondered, “What are partial dentures?” you most likely have a need they can fulfill. The partial lack of teeth, also known as edentulism affects the majority of American adults. We can provide you with partial dentures or complete dentures to restore a smile to full functionality. Complete dentures are for patients who are missing all their teeth. Dentures are also a great option for many people.

Denture cleanser tablets are dropped into warm water to create an effervescent solution. Dentures are removed from the mouth and placed in the solution.  Soaking dentures in the cleaning solution helps kill germs that can cause odor. The amount of time dentures should be soaked—from a few minutes to overnight—depends on the manufacturer’s instructions.

Remember: You can do serious harm to your denture and to your health by trying to adjust or repair your denture. Using a do-it-yourself kit can damage the appliance beyond repair. Glues sold over-the-counter often contain harmful chemicals and should not be used on a denture. If your denture breaks, cracks or chips, or if one of the teeth becomes loose, call your dentist immediately. In many cases, dentists can make necessary adjustments or repairs, often on the same day. Complicated repairs may require that the denture be sent to a special dental laboratory. 

Partial dentures, or partials, are dentures that replace only a few missing teeth in the patient’s mouth. Partials rest on a metal framework that will be latched onto the patient’s natural teeth for support. If the patient’s existing teeth are insufficient, dental crowns are usually used to augment the natural teeth and serve as more stable anchors for the partial dentures.

In either case, as you are making the decision between dentures versus bridges, it is very important to speak with your dental professional. Contact Arkansas Family Dental if you have questions about dentures or bridges. You can also schedule an appointment with either Dr. Nichols or Dr. Mascagni for help deciding between your tooth replacement options.
There are several types of partial and full dentures. Complete dentures, also called full dentures, may be recommended when all teeth in the upper or lower jaw are missing. There are two options for complete dentures: immediate and conventional. Immediate dentures are made before the patient's teeth are removed and can be inserted as soon as the tooth removal surgery is complete.

According to the Kaiser Family Foundation report, Oral Health in the US: Key Facts, 15% of the US population lives in dental Health Professional Shortage Areas. Forty percent of Americans have no dental insurance, according to US News and World Report, even though enrollment in a dental plan is the primary indicator of a patient’s ability (and likelihood) to get proper dental care.

Premium dentures can cost $2,000-$4,000 per plate, or $4,000-$8,000 or more for a set. Dentures in this price range are a personalized fit, use high-end materials to simulate the look of gums and teeth as closely as possible, last a long time and are warranted against chipping and cracking for 5-10 years or longer. Often the price includes several follow-up visits to fine-tune the fit.

Stability is the principle that describes how well the denture base is prevented from moving in a horizontal plane, and thus sliding from side to side or front to back. The more the denture base (pink material) is in smooth and continuous contact with the edentulous ridge (the hill upon which the teeth used to reside, but now only residual alveolar bone with overlying mucosa), the better the stability. Of course, the higher and broader the ridge, the better the stability will be, but this is usually a result of patient anatomy, barring surgical intervention (bone grafts, etc.).

According to the Kaiser Family Foundation report, Oral Health in the US: Key Facts, 15% of the US population lives in dental Health Professional Shortage Areas. Forty percent of Americans have no dental insurance, according to US News and World Report, even though enrollment in a dental plan is the primary indicator of a patient’s ability (and likelihood) to get proper dental care.

It is important to inquire about the dentist’s training and experience when investigating the denture procedure. Although many general dentists offer the treatment, prosthodontists receive three years of advanced training in restorative dentistry. As a result they may be a better or more experienced option for you to consider when it comes to dentures or an alternative like implants or bridges. The American College of Prosthodontists offers additional resource information about the training of prosthodontists in the U.S.

I bought a full upper denture and within months, they were way too loose. I was told by my dentist they would need relining after several months. My dentist now wants $475 to reline and fit these very thin dentures, but she never mentioned I would be charged to have these refitted. After paying $2,500 total (and unexpectedly), I was just wondering Is this the norm? Or was I just unlucky?Answer: Whenever teeth are extracted, the jawbone and gums in the areas where the teeth used to be start to shrink. This shrinkage can continue for the rest of your life, and this is part of the reason that most dentures need to be refit periodically. Because the most rapid jaw shrinkage occurs during the first six months after extractions, it would be quite normal for your dentures to be loose after six months and require relining. Because the need for this additional and continual treatment (refitting) can vary greatly from patient to patient and time to time, it is most often considered as a separate part of your treatment plan, and the time necessary to accomplish this service is billed accordingly.Response provided by the American College of Prosthodontists. Back to top
_{Our practice owner is Cameron Blair, DDS, MICOI, MAAIP, a general dentist and member of the Academy of General Dentistry, the Dallas Dental Society, the American Dental Association, and the Texas Dental Association. He�€™s a graduate of the University of North Carolina at Chapel Hill School of Dentistry and a Master in the International Congress of Oral Implantologists. Using industry-leading technology in his practice, he�€™s able to provide patients with a wide range of denture and implant solutions.}
^{As of now I essentially have no teeth and won't until at least 2-3 months later when I am supposed to return for my "permanent denture". It is incredibly humiliating having to go out in public with no teeth. I returned to ask what they could do and they wanted around 300 bucks for a reline but recommended I just get a new denture made (which they of course wanted to charge me around 600 bucks for). I couldn't believe what I was hearing. They made an awful denture and refused to fix it. Suddenly all of the nightmare stories began to make sense. I kindly told them to screw off and that I would just wait a few months.}

New dentures may feel awkward for a few weeks until you become accustomed to them. The dentures may feel loose while the muscles of your cheek and tongue learn to keep them in place. It is not unusual to experience minor irritation or soreness. You may find that saliva flow temporarily increases. As your mouth becomes accustomed to the dentures, these problems should go away. Follow-up appointments with the dentist are generally needed after a denture is inserted so the fit can be checked and adjusted. If any problem persists, particularly irritation or soreness, be sure to consult your dentist.