I will ask to see the dentist when I return and tell him that if the permanent denture is not going to be formed with any more care than this, I want the remainder of my money back and I will go elsewhere. Even for an "affordable denture" the quality of this temporary is not worth the mouth pain and I will never be able to wear it for 6mo to 1yr while I wait for the permanent one. If you can afford better, then please do, as you will not be happy with the poor quality results.
I went to Affordable Dentures & Implants on 1/4/17 to get a full set of dentures. Before I went I, I had watched youtube videos to see the issues and complaints that people had about wearing dentures. I was surprised that Dr. Athari immediately addressed the same issues. The first thing he said to me was, " Dentures are not fun". I appreciated the honesty but still wanted them. So he suggested that I get dentures on the top and then wait and or save up to get implants on the bottom. This was to avoid the problem that most people have with the dentures on the bottom moving so much. I was curious about how much that would be so the administrative assistant typed up and printed out a detailed treatment plan. After she informed me that the total cost wasn't due up front, I realized that it was doable. I just got my upper dentures done today and I am really pleased. I can't wait to get my implants. Thank you Dr. Athari.
The fabrication of a set of complete dentures is a challenge for any dentist/denturist. There are many axioms in the production of dentures that must be understood; ignorance of one axiom can lead to failure of the denture. In the vast majority of cases, complete dentures should be comfortable soon after insertion, although almost always at least two adjustment visits are necessary to remove the cause of sore spots. One of the most critical aspects of dentures is that the impression of the denture must be perfectly made and used with perfect technique to make an accurate model of the patient's edentulous (toothless) gums. The dentist or denturist must use a process called border molding to ensure that the denture flanges are properly extended. An array of problems may occur if the final impression of the denture is not made properly. It takes considerable patience and experience for a dentist to know how to make a denture, and for this reason it may be in the patient's best interest to seek a specialist, either a prosthodontist or denturist, to make the denture. A denturist is a trained and licensed professional who sees patients in need of dentures, partials, relines or repairs. A denturist not only takes the impression, but makes the entire denture in his or her own laboratory. The denturist then schedules a date for the delivery of the finished dentures to the patient. A general dentist may do a good job making dentures, but only if he or she is meticulous and experienced. Many dentists no longer make dentures themselves. but instead take an impression of the patients' mouth and then either send the impressions to a dental laboratory, which could be anywhere in the world, or send the patient to a denturist. Once the laboratory receives dental impressions of the patient's mouth, the laboratory creates plaster molds from them. The laboratory uses the molds to create the wax rims used to register the patient's bite. These wax rims are returned to the dentist, who uses them to register the patient's bite. The dentist may assist the patient in choosing the correct size of teeth for the dentures, or simply make the selection himself. Once bite registration is completed and the teeth are selected for the dentures, the wax rim is usually returned to the dental laboratory in order to have the denture teeth set into the wax. Once the teeth are set into the wax rim, the result is a prefinished denture that looks almost like the finished product. This prefinished denture is usually returned to the dentist's office and the patient usually has a chance to approve the setup (for immediate or standard dentures) or to try the denture before it is finished. After approval by the patient, the dentist returns the pre-denture to the laboratory for final processing. The finished denture is then returned to the dentist's office for delivery to the patient.
Minor fractures in the teeth or acrylic base can usually be repaired by a dental lab in 1 to 2 days. Denture repair kits are even sold at most drugstores and online to fix minor cracks or replace loose teeth. Repairing the denture properly can be complicated, however, so if denture problems are noticed, it is best to contact a general dentist as soon as possible to arrange the denture repair.
The main alternatives are a fixed bridge or a dental implant. A dental bridge is made by putting crowns on the teeth at either side of the gap, and then joining these two crowns together by placing a false tooth in the space. This is all made in the laboratory and then the pieces are cemented into place with special adhesives. The bridge can't be removed.
Partial Dentures: Partial dentures can either be made with a plastic base or a metal framework that supports the number of teeth that need to be replaced. It is held in the mouth by using clasps and rests that are carefully adapted around the natural teeth. The partial denture that uses a metal framework is the traditional design, due to the rigidity and strength of the metal. Plastic partial dentures have normally been used as emergency or temporary replacements of missing teeth, allowing the gums and bone to heal before a definitive restorative solution is obtained. Recently, however, various materials such as Valplast have been developed to provide durable, flexible alternatives in certain situations.
Retention is the principle that describes how well the denture is prevented from moving vertically in the opposite direction of insertion. The better the topographical mimicry of the intaglio (interior) surface of the denture base to the surface of the underlying mucosa, the better the retention will be (in removable partial dentures, the clasps are a major provider of retention), as surface tension, suction and friction will aid in keeping the denture base from breaking intimate contact with the mucosal surface. It is important to note that the most critical element in the retentive design of a maxillary complete denture is a complete and total border seal (complete peripheral seal) in order to achieve 'suction'. The border seal is composed of the edges of the anterior and lateral aspects and the posterior palatal seal. The posterior palatal seal design is accomplished by covering the entire hard palate and extending not beyond the soft palate and ending 1–2 mm from the vibrating line.
A film of saliva typically helps hold dentures in place. Denture adhesives may be used if the salivary glands do not produce a sufficient amount of saliva. Denture adhesives are not, however, a remedy for ill-fitting dentures. A denture that fits poorly (i.e., feels loose or causes discomfort) may need to be relined or replaced as it can contribute to the development of mouth sores.
The term oral cancer includes cancer of the mouth (oral cavity) and the back of the mouth (oropharynx). Red and white patches inside the mouth, bleeding, loose teeth, pain upon swallowing, a lump in the neck, earache, and a sore on your lip or in your mouth that won't heal are all symptoms of oral cancer. Treatment for oral cancer depends upon the staging of the disease and usually involves surgery, radiation therapy, or chemotherapy.
MCCALLA, ALABAMA -- 5/8/18 I had all my remaining top teeth removed & an immediate denture (ID) put in. First, I was the last surgery of the day. The dentist let all his experienced staff leave & had the receptionist assist him! He had to tell her every little thing to do. She couldn't even work the suction instrument correctly & she finally just quit suctioning my mouth!
Dentures are essentially removable replacements for missing teeth. Two types of dentures are available: complete, or full, dentures and partial dentures. Patients who need to replace an entire row of teeth use full dentures. On the other hand, partial dentures, or partials, are used when only a few of the teeth need to be replaced and some of the natural teeth are still intact. At the Family Dental Group, full and partial dentures are fabricated to resemble natural teeth as closely as possible while also taking into consideration the patient’s comfort when wearing them.
The field of dentistry has made incredible strides over the last 50 years, and we take great care to remain at the forefront of outstanding dentistry. Tools such as cone-beam computed tomography (CT) allow us to look beyond the soft tissues of your smile to assess the health of the jawbone. This technology provides high-definition three-dimensional images of your craniofacial structure. This is crucial to determining exactly where dental implants should be placed in order to ensure beneficial long-term outcomes. Our patients have experienced life-changing benefits thanks to our sophisticated treatments.
The reason the cost for either "new" (conventional, non-immediate) or "replacement" full dentures is the same is that for the most part all of the steps that the dentist must take, and the number of appointments needed, are essentially the same in both cases. Also, all of the costs they encounter (like the price they pay a dental laboratory to fabricate the appliance) are the same too.
Tooth extraction and restoration: If tooth decay or gum disease is so severe that a tooth can't be saved, it will need to be extracted. Your dentist will examine the remaining teeth in your mouth and determine if they should be removed or restored with tooth-colored fillings, inlays, onlays, or dental crowns. After the teeth have been extracted, the gums need at least two to three months to heal before an implant can be placed or an impression taken.
Premium dentures can cost $2,000-$4,000 per plate, or $4,000-$8,000 or more for a set. Dentures in this price range are a personalized fit, use high-end materials to simulate the look of gums and teeth as closely as possible, last a long time and are warranted against chipping and cracking for 5-10 years or longer. Often the price includes several follow-up visits to fine-tune the fit.
In addition to the complications that are specific to the implant, abutments, and dentures, there are various oral health problems that can occur in patients with dentures. Patients should keep their teeth and gums clean, and visit the dentist every six months so problems, if they exist, can be identified and treated. The types of oral health problems that commonly affect patients with dentures include:
Most new denture issues are caused by gums adjusting to extractions and the placing of artificial teeth. These are not problems particular to me. My gums were ready for permanent partials, yet Affordable Dentures refused to provide them. At one point, Dr. **, in an effort to deflect responsibility for her inferior work, pointed to my natural tooth #22, and said, "It's this one that's causing all the trouble. This tooth gave us FITS!" Tooth #22 had nothing to do with the creation or placement of her shoddy partials. My #22 is perfectly normal and was not in the way of anything. Dr.** simply had to divert attention from her fraud by projecting away from herself.
The reason the cost for either "new" (conventional, non-immediate) or "replacement" full dentures is the same is that for the most part all of the steps that the dentist must take, and the number of appointments needed, are essentially the same in both cases. Also, all of the costs they encounter (like the price they pay a dental laboratory to fabricate the appliance) are the same too.
I bought a full upper denture and within months, they were way too loose. I was told by my dentist they would need relining after several months. My dentist now wants $475 to reline and fit these very thin dentures, but she never mentioned I would be charged to have these refitted. After paying $2,500 total (and unexpectedly), I was just wondering Is this the norm? Or was I just unlucky?Answer: Whenever teeth are extracted, the jawbone and gums in the areas where the teeth used to be start to shrink. This shrinkage can continue for the rest of your life, and this is part of the reason that most dentures need to be refit periodically. Because the most rapid jaw shrinkage occurs during the first six months after extractions, it would be quite normal for your dentures to be loose after six months and require relining. Because the need for this additional and continual treatment (refitting) can vary greatly from patient to patient and time to time, it is most often considered as a separate part of your treatment plan, and the time necessary to accomplish this service is billed accordingly.Response provided by the American College of Prosthodontists. Back to top
While we strive to offer the highest quality of care possible, we know that a person who can’t afford treatment is not going to come in, regardless of how great a job we do. That is why we work with our patients as much as we possibly can. We want to make sure that they get the care they need and that they get it a price they can afford. To that end, we offer significant discounts over other care providers. Additionally, we are always happy to help set up a flexible financing program with our clients.
The process starts by taking a series of impressions or molds of the oral tissues that will support the denture. A dental lab will use these impressions to make models of the patient's mouth. The dentist and laboratory technician will then slowly start building the dentures on these models and transferring them to the patient's mouth at each step to ensure proper fit, establish a proper bite, and ensure that the appearance and esthetics of the denture are desirable. The patient will generally need to be seen by the dentist once per week for about 4 to 5 weeks until the denture is complete. The patient will then need to return occasionally during the first month after the denture is delivered to have adjustments made.
Later that afternoon I came back to have 16 teeth extracted. I got to the office and waited about 30 minutes before I was seen. I got to the back and began injections. After this I went to a full blown panic attack and came close to passing out. The one positive is the dentist who was working on me took it in stride. I wasn't treated disrespectfully and after about 30 minutes the panic subsided and she was able to finish my injections and begin pulling teeth.
