It's been good. Dr Chi was the dr that started the denture process. Dr Chi left and dr Russo took over our case today. Dr Russo was very pleasant to work with. I drive my neighbor to the appts. She is blind and has had a vey bad gagging issue. So far everyone has been very patient and tried hard getting the dentures to fit. it's been more difficult in her case with the gagging issue. The women in the office are all wonderful. More
The UltimateFit Denture is our most innovative denture made with patented high-pressure injection technology. This unique process creates dentures that fit every contour of your mouth and oral topography and are second-to-none. The dentures are also remarkably strong, lightweight, as well as odor and stain resistant. For patients that have worn traditional dentures, a new experience awaits.
The field of dentistry has made incredible strides over the last 50 years, and we take great care to remain at the forefront of outstanding dentistry. Tools such as cone-beam computed tomography (CT) allow us to look beyond the soft tissues of your smile to assess the health of the jawbone. This technology provides high-definition three-dimensional images of your craniofacial structure. This is crucial to determining exactly where dental implants should be placed in order to ensure beneficial long-term outcomes. Our patients have experienced life-changing benefits thanks to our sophisticated treatments.
Been struggling with getting my dentures since June. After waiting weeks for first appointment, came back for second appointment. Was told can't complete services because location was then closing for a week because first doc was fired. Asked me to reschedule at least a week after reopening since they'd need to catch up. So I rearranged my schedule. OK. Came back yesterday, Thursday, and the girl dropped my impression on the floor right in front of me, then told me to come back at 1:00. I asked if needed to redo the impression but she just brushed it off. As soon as I was 10 miles away, I was called back to redo the impression because they needed a better one. OK. So I return and make another impression, and left with pain, bleeding, and swelling. Told to return at 1:30 to get my new teeth. OK.
HOME About Us Meet Dr. Scott Meet Dr. Yonan Meet Dr. Bushnell Meet Dr. Wasserman Meet Dr. Fairbanks Meet Dr. Quigley Meet Our Team Reviews New Patients First Visit Financial Info Patient Forms Online Bill Pay Services Cleaning and Prevention Cosmetic Dentistry Extractions & Preservation Family Dentistry Oral Appliances Orthodontics Sedation Dentistry Technology Tooth Replacement Contact Us Book Online Refer a Friend 541-383-0754
BEWARE: I have purchased the most expensive denture offered called the "Ultimate Fit Package". Upper denture only at $1200.00. This is my experience in this office. I went in for my first visit at Affordable Dentures in Shelbyville, with Dr. Marvo **, in October 2017. My upper teeth had already been extracted 2 months earlier at a local dentist office in Lewisburg. I spent a lot of time researching all of the available options online at Affordable Dentures in Shelbyville, TN., before contacting them to set up an appointment. I purposely chose the "Ultimate Fit Denture" because it was supposed to fit every contour of my mouth, the oral topography was touted as being "second-to-none" plus it comes with a 7 year warranty.
This will be my second set of dentures. I've learned there are different types for different budgets. My first pair were premium and lasted over 25 years. After searching all over town 1 800 dentist referred me to Dr Jerry he is semi retired and wonderful he mastered dentures but there not cheap but you get what you pay for. So if you need dentures try to afford the premium cause cheap dentures are not worth it in the long run
Our practice owner is Cameron Blair, DDS, MICOI, MAAIP, a general dentist and member of the Academy of General Dentistry, the Dallas Dental Society, the American Dental Association, and the Texas Dental Association. He�s a graduate of the University of North Carolina at Chapel Hill School of Dentistry and a Master in the International Congress of Oral Implantologists. Using industry-leading technology in his practice, he�s able to provide patients with a wide range of denture and implant solutions.
I at age 16 was in car accident went through the windshield and lost 4 on top and 4 lower so have had partials the last 30 years. Now I have one tooth left on top so I at least need the upper denture implant as for the bottoms well they are not great but can make due a few more years before I will have to get them. I have very lil income as I have just started my cleaning business last year. That being said I am very willing to trade services so long as it a denture implant or something very similar. Right now business is pretty slow always is during the summer. I am OCD and a perfectionist most likely the reason I love cleaning and do it better than most anyone with lil to no chemicals except the normal items you already have at home that care not harmful to the environment people/pets. You give me a beautiful smile back so I can also eat more than soups/foods that require lil to no chewing. I will give u the cleanest office & home 5 days a week for 6-8 months promise
You should see your dentist 24 hours after delivery of your new dentures. It is not unusual to experience some initial discomfort. Minor adjustments can increase comfort and eliminate problems before they become more serious. Initially, a new denture may feel unusual in the mouth. The cheeks, lips, and tongue are very sensitive areas that require time to adjust. It is not uncommon to bite one’s cheek or tongue while acclimating to the new restoration. However, persistent soreness or irritation should be reported to your dentist.
If you are in need of replacing an entire arch of teeth, a full arch denture is going to be the most affordable tooth-replacement option. Additionally, not having any teeth causes mild to severe physical changes in your face mouth and lips. A full arch denture can restore some biting and chewing functionality and bring back a more attractive appearance.
Dentures must be handled with great care and placed in a container of water or denture cleaner when not being worn. They should never be placed in hot water, for they can be damaged or warped. They must be cleaned daily using a soft toothbrush with soap and water. The mouth should be rinsed daily without the dentures in place to clean off any plaque and reduce the risk of infection like candidiasis.
Throughout the years, a key driver of our expansion (now more than 230 affiliated practice locations...and counting!) has been Affordable Care, a dental support organization that equips affiliated practice owners to meet their ever-growing patient needs. Affordable Care provides lab and business services through a nationwide network of on-site Affordable Dentures Dental Laboratories (ADDL) and extensive nonclinical support.
Problems with dentures may arise because patients are not used to having something in their mouth that is not food. The brain senses the appliance and interprets it as 'food', sending messages to the salivary glands to produce more saliva and to secrete it at a higher rate. This usually only happens in the first 12 to 24 hours, after which the salivary glands return to their normal output. New dentures can also be the cause of sore spots as they compress the denture-bearing soft tissues (mucosa). A few denture adjustments in the days following insertion of the dentures can take care of this problem. Gagging is another problem encountered by a minority of patients. At times, this may be due to a denture that is too loose, too thick or extended too far posteriorly onto the soft palate. At times, gagging may also be attributed to psychological denial of the denture. Psychological gagging is the most difficult to treat since it is out of the dentist's control. In such cases, an implant-supported palateless denture may have to be constructed. Sometimes there could be a gingivitis infection under the completed dentures, caused by the accumulation of dental plaque. One of the most common problems for wearers of new upper complete denture is a loss of taste sensations.
As far as back office goes, Carlos the assistant has the patience of a saint. Seriously. We had to do a full series of x-rays because my mom couldn't stand up for the pano. My mom had trouble holding still and repeatedly failed to follow instructions. Carlos never stopped smiling and encouraging her. He had a lot of positive energy and kept joking with her throughout, which I know went a long way to making her feel good about the office. He did the same during the other visits, but the x-rays I'm sure were the biggest challenge.
When you see these low costs advertised, it is almost always a "bait and switch." With dentures, you get about what you pay for, but rarely would you find even average quality for $399-$599 and that is for each, not both. Since well-fitting dentures are essential for good health, to say nothing of cosmetics, one should not consider price alone. Low cost dentures use cheap and "soft" teeth that wear rapidly and look fake, while higher quality teeth last for many years. The pink denture base made of cheap material discolors, breaks easily and usually fits poorly. I would advise that, as with hand grenades and parachutes, don't always look for the lowest cost.
Patients can become entirely edentulous (without teeth) for many reasons, the most prevalent being removal due to dental disease typically relating to oral flora control, i.e., periodontal disease and tooth decay. Other reasons include pregnancy, tooth developmental defects caused by severe malnutrition, genetic defects such as dentinogenesis imperfecta, trauma, or drug use.
Retention is the principle that describes how well the denture is prevented from moving vertically in the opposite direction of insertion. The better the topographical mimicry of the intaglio (interior) surface of the denture base to the surface of the underlying mucosa, the better the retention will be (in removable partial dentures, the clasps are a major provider of retention), as surface tension, suction and friction will aid in keeping the denture base from breaking intimate contact with the mucosal surface. It is important to note that the most critical element in the retentive design of a maxillary complete denture is a complete and total border seal (complete peripheral seal) in order to achieve 'suction'. The border seal is composed of the edges of the anterior and lateral aspects and the posterior palatal seal. The posterior palatal seal design is accomplished by covering the entire hard palate and extending not beyond the soft palate and ending 1–2 mm from the vibrating line.
The next week I came in early in the morning to have my impressions made. This was fairly quick and I was only in the office for about an hour total. The impression taking process was very unpleasant and I gagged the entire way through. I personally don't blame the dentist because I do have a very strong gag reflex. Other than that the whole process was very smooth. So far so good right?
Dr. Walton's dental center has an on-site dental lab that fabricates new dentures and provides repairs and relines, often with same-day service. He crafts single-visit crowns using the latest CAD/CAM technology to deliver a custom, natural-looking restoration. Dr. Walton has incorporated the use of Laser Technology in his practice to provide his patients with the leading edge options for surgery and periodontal treatment. Being able to provide dentures and crowns in a day is a significant advantage, especially for patients who have traveled far distances. The on-site lab also eliminates the need to use outside commercial labs, therefore helping to keep costs low.
The fabrication of a set of complete dentures is a challenge for any dentist/denturist. There are many axioms in the production of dentures that must be understood; ignorance of one axiom can lead to failure of the denture. In the vast majority of cases, complete dentures should be comfortable soon after insertion, although almost always at least two adjustment visits are necessary to remove the cause of sore spots. One of the most critical aspects of dentures is that the impression of the denture must be perfectly made and used with perfect technique to make an accurate model of the patient's edentulous (toothless) gums. The dentist or denturist must use a process called border molding to ensure that the denture flanges are properly extended. An array of problems may occur if the final impression of the denture is not made properly. It takes considerable patience and experience for a dentist to know how to make a denture, and for this reason it may be in the patient's best interest to seek a specialist, either a prosthodontist or denturist, to make the denture. A denturist is a trained and licensed professional who sees patients in need of dentures, partials, relines or repairs. A denturist not only takes the impression, but makes the entire denture in his or her own laboratory. The denturist then schedules a date for the delivery of the finished dentures to the patient. A general dentist may do a good job making dentures, but only if he or she is meticulous and experienced. Many dentists no longer make dentures themselves. but instead take an impression of the patients' mouth and then either send the impressions to a dental laboratory, which could be anywhere in the world, or send the patient to a denturist. Once the laboratory receives dental impressions of the patient's mouth, the laboratory creates plaster molds from them. The laboratory uses the molds to create the wax rims used to register the patient's bite. These wax rims are returned to the dentist, who uses them to register the patient's bite. The dentist may assist the patient in choosing the correct size of teeth for the dentures, or simply make the selection himself. Once bite registration is completed and the teeth are selected for the dentures, the wax rim is usually returned to the dental laboratory in order to have the denture teeth set into the wax. Once the teeth are set into the wax rim, the result is a prefinished denture that looks almost like the finished product. This prefinished denture is usually returned to the dentist's office and the patient usually has a chance to approve the setup (for immediate or standard dentures) or to try the denture before it is finished. After approval by the patient, the dentist returns the pre-denture to the laboratory for final processing. The finished denture is then returned to the dentist's office for delivery to the patient.
New dentures may feel a little odd or loose for a few weeks until the muscles of the cheeks and tongue learn to keep them in place and you get comfortable inserting and removing them. Also, it is not unusual for minor irritation or soreness to occur and for saliva flow to increase when you first start wearing dentures, but these problems will diminish as the mouth adjusts.
