After graduating from the University of Connecticut Dental School in 2014, Dr. Secola underwent a general practice residency before relocating to Dallas. She enjoys providing high-quality dental care to all patients. Dr. Secola's residency training was at the same facility where Dr. Damon and Dr. Blankenship were residents as well. This program is through the VA hospital system and only allows for 2 residents per year.
The shoddy work of Drs. ** and ** resulted in blisters, lesions, sores and bleeding in my mouth. All caused by Affordable Dentures' defective product. The lowers would not allow my mouth to rotate or chew. And I was expected to be tortured like this for no less than one year and up to two years! Subsequently, I was examined in an emergency room and by a dentist in federal practice, all advising me to contact Dr. ** for adjustment.
A full arch denture is a removable tooth replacement option for those who need all their teeth replaced. They can be crafted to provide the characteristics (tooth shape and color) the patient desires. Advances have been made in the materials used for dentures and in the way they are designed. If you already have dentures (partial or full arch) you may be experiencing a loose fit or denture slipping. This can lead to gum sores, can affect your chewing and your speech and decrease your confidence when speaking and/or laughing with others. We can help restore your dentures to the correct fit.
More modern dentures can be fitted immediately after removal of the last tooth. They are made prior to the operation and allow the user full faculty of their mouth straight after their insertion. However, immediate dentures may lose their fit as the bones and gum shrink during the healing process. Immediate dentures are often used as a temporary solution until conventional dentures can be fitted at a later date.
Your unique dental needs will dictate the overall cost of your partial denture. However, partial dentures are certainly a cost-effective solution for most patients, especially with our low prices. Additionally, DDS Dentures + Implant Solutions offers a Price Beat Guarantee. If you have a written treatment plan and cost from a competitor and choose to receive comparable services from DDS Dentures + Implant Solutions, we will beat the competitor’s price by 10 percent. Chances are, our rates already beat those of our competitors!
Are you missing many or all of your teeth? If so, dentures may be the solution for you! Dr. Taylor or Dr. Carmichael provide custom full and partial dentures at Affordable Dentistry and Orthodontics, designed and created at our in-house dental lab, to restore your smile and the shape of your face. We invite you to call our office at 214-330-7771 to learn more about dentures in Dallas, Texas, and schedule a consultation with one of our skilled dentists.
New dentures may feel awkward or uncomfortable for the first few weeks or even months. Eating and speaking with dentures might take a little practice. A bulky or loose feeling is not uncommon, while the muscles of your cheeks and tongue learn to hold your dentures in place. Excessive saliva flow, a feeling that the tongue does not have adequate room, and minor irritation or soreness are also not unusual. If you experience irritation, see your dentist.
There are three main ways to replace missing teeth. The first is with a removable false tooth (or teeth) - called a partial denture. The second is with a fixed bridge. A bridge is usually used when there are fewer teeth to replace, or when the missing teeth are only on one side of the mouth. The third way is by the use of dental ‘implants'. This is where an artificial root is placed into the bone of the jaw and a crown or bridge placed on top of this. See our leaflet ‘Tell me about: dental implants'.
Whether you are considering getting dentures, already have them, or know someone with them, it’s very likely that you may have some questions about them. What follows is information on what dentures really are, what kind of care they require, and how dentures can improve your oral health. We hope to help you find the answers to all your denture queries and to find out, if necessary, whether dentures might be right for you.
Most partial dentures contain a thin metal framework that is designed to rest close to your gums and allow for a smooth, non-bulky feel. The framework is supported by your natural teeth to provide a reliable, secure appliance that is easy to use. Where teeth are missing, natural-looking replacement teeth are attached to the frame, and gum-colored acrylic is used to make the appliance blend with your mouth. Again, your mouth and your needs are unique, and Dr. Yonan, Scott, Quigley, Fairbanks & Bushnell work with skilled technicians to create a solution that is comfortable and esthetic.
Dentures do not function like natural teeth. It takes time to learn how to properly use dentures. Food must be cut up into small pieces and be placed on the back teeth on both sides to balance chewing. Denture chewing occurs up and down bilaterally, not on one side. One sided chewing will cause the dentures to dislodge. Biting with the front denture teeth will cause the back of the dentures to dislodge. Dentures only function properly when force is applied evenly over the entire chewing surface of the back teeth.
Once the actual extractions were over they stitched my mouth up and inserted my temporary denture. Now I consider myself a very tolerant person. I was willing to look past the sales pitches, the potentially broken jaw, and the incompetent receptionists. What really set me off is when the denture itself was so poorly made that it would not even stay in my mouth. I knew something was up when the lady who inserted the denture told me that I would need to wear "a lot" of adhesive to get the denture to stay in. Despite the fact that my mouth was swollen and that my gums had not yet receded at all.
The process of fabricating a denture usually begins with an initial dental impression of the maxillary and mandibular ridges. Standard impression materials are used during the process. The initial impression is used to create a simple stone model that represents the maxillary and mandibular arches of the patient's mouth. This is not a detailed impression at this stage. Once the initial impression is taken, the stone model is used to create a 'Custom Impression Tray' which is used to take a second and much more detailed and accurate impression of the patient's maxillary and mandibular ridges. Polyvinylsiloxane impression material is one of several very accurate impression materials used when the final impression is taken of the maxillary and mandibular ridges. A wax rim is fabricated to assist the dentist or denturist in establishing the vertical dimension of occlusion. After this, a bite registration is created to marry the position of one arch to the other.
It was our impression from viewing the video that this technique is very dependent on the dentist's skill in performing the needed steps (more so than with conventional construction, primarily due to time constraints needed to accomplish certain steps, and accomplish them the first time, properly, before the denture materials set). So in that regard, likely the dentist who fabricated your mother's denture is due as much credit as the system itself.
A partial denture is a removable, yet natural-looking dental appliance that helps restore the form and function of your jaw by replacing one or several missing teeth. Partial dentures are made from a combination of metal and acrylic – which gives them the strength to handle your needs for chewing and speaking, while also looking natural. Some partial dentures are entirely made from acrylic – these dentures tend to be less durable and structurally sound, but may be a solution for you depending on your situation. Rest assured DDS Dentures + Implant Solutions will help you select the right partial denture for your unique needs.
Most patients need a few weeks to get used to the feel and use of their new dentures. Until the muscles of the cheeks and tongue adjust to the new dentures and learn to keep them in place, they may feel a little loose. It will also take time before you are comfortable putting your dentures in place and removing them. Since the mouth increases the amount of saliva produced in reaction to the new dentures, patients should expect to have mild sores and irritations in their mouth.
Dr. Walton's dental center has an on-site dental lab that fabricates new dentures and provides repairs and relines, often with same-day service. He crafts single-visit crowns using the latest CAD/CAM technology to deliver a custom, natural-looking restoration. Dr. Walton has incorporated the use of Laser Technology in his practice to provide his patients with the leading edge options for surgery and periodontal treatment. Being able to provide dentures and crowns in a day is a significant advantage, especially for patients who have traveled far distances. The on-site lab also eliminates the need to use outside commercial labs, therefore helping to keep costs low.
The fabrication of a set of complete dentures is a challenge for any dentist/denturist. There are many axioms in the production of dentures that must be understood; ignorance of one axiom can lead to failure of the denture. In the vast majority of cases, complete dentures should be comfortable soon after insertion, although almost always at least two adjustment visits are necessary to remove the cause of sore spots. One of the most critical aspects of dentures is that the impression of the denture must be perfectly made and used with perfect technique to make an accurate model of the patient's edentulous (toothless) gums. The dentist or denturist must use a process called border molding to ensure that the denture flanges are properly extended. An array of problems may occur if the final impression of the denture is not made properly. It takes considerable patience and experience for a dentist to know how to make a denture, and for this reason it may be in the patient's best interest to seek a specialist, either a prosthodontist or denturist, to make the denture. A denturist is a trained and licensed professional who sees patients in need of dentures, partials, relines or repairs. A denturist not only takes the impression, but makes the entire denture in his or her own laboratory. The denturist then schedules a date for the delivery of the finished dentures to the patient. A general dentist may do a good job making dentures, but only if he or she is meticulous and experienced. Many dentists no longer make dentures themselves. but instead take an impression of the patients' mouth and then either send the impressions to a dental laboratory, which could be anywhere in the world, or send the patient to a denturist. Once the laboratory receives dental impressions of the patient's mouth, the laboratory creates plaster molds from them. The laboratory uses the molds to create the wax rims used to register the patient's bite. These wax rims are returned to the dentist, who uses them to register the patient's bite. The dentist may assist the patient in choosing the correct size of teeth for the dentures, or simply make the selection himself. Once bite registration is completed and the teeth are selected for the dentures, the wax rim is usually returned to the dental laboratory in order to have the denture teeth set into the wax. Once the teeth are set into the wax rim, the result is a prefinished denture that looks almost like the finished product. This prefinished denture is usually returned to the dentist's office and the patient usually has a chance to approve the setup (for immediate or standard dentures) or to try the denture before it is finished. After approval by the patient, the dentist returns the pre-denture to the laboratory for final processing. The finished denture is then returned to the dentist's office for delivery to the patient.
We continue to invest in our dental lab technicians by providing opportunities to advance their technical and professional skill sets. Our technicians receive assistance with continuing education, work with cutting-edge technology, and learn innovative techniques, including advanced implant prosthetic-restoration training. Our technicians also receive professional recognition within the field of dental lab technology, such as becoming a Certified Dental Lab Technician.
Getting 16 teeth pulled is about as pleasant as it sounds. I have had many teeth extracted in the past and this was by far the most unpleasant experience I have had. The most curious thing about this visit was there was NO assistant involved in the actual dental work. The dentist was working alone for the entire time. Maybe this is standard procedure at some places but it felt odd to me. The dentist was VERY rough and borderline careless during the extractions. She had to yank especially hard to remove some of the teeth at the bottom of my mouth. I immediately felt pain despite being numb.
They deserve ten stars. Took my elderly blind neighbor to Bright Now dental and waited over an hour and a half past our appt time. Was so angry we walked out and didn't know what to do so we found Dental Works in the same mall. We had no appt but they fit us right in. They were wonderful. Had to have 12 teeth pulled and now onto dentures. All the women that work there are very friendly and caring. Dr Chi was great and very gentle on a poor lady who was scared to death. Would highly recommend them and their price was the best too!!!!! More
Most partial dentures contain a thin metal framework that is designed to rest close to your gums and allow for a smooth, non-bulky feel. The framework is supported by your natural teeth to provide a reliable, secure appliance that is easy to use. Where teeth are missing, natural-looking replacement teeth are attached to the frame, and gum-colored acrylic is used to make the appliance blend with your mouth. Again, your mouth and your needs are unique, and Dr. Yonan, Scott, Quigley, Fairbanks & Bushnell work with skilled technicians to create a solution that is comfortable and esthetic.
The reason the cost for either "new" (conventional, non-immediate) or "replacement" full dentures is the same is that for the most part all of the steps that the dentist must take, and the number of appointments needed, are essentially the same in both cases. Also, all of the costs they encounter (like the price they pay a dental laboratory to fabricate the appliance) are the same too.
Teeth can fall out for a number of reasons, ranging from genetics to drug abuse. Most commonly, teeth are removed or fall out on their own due to severe tooth decay. Neglect to upkeep oral hygiene or not seeking proper treatment for damaged teeth, can lead to the onset of decay which in turn leads to loss of teeth. Visiting you dentist in 6 month intervals is a good preventive measure to spot any early signs of decay.
This type of denture is made to be placed in the mouth immediately after you have all your natural teeth extracted. This allows you to leave the office without the embarrassment of having no teeth while the gums heal from the extraction. The denture is made to conform to your mouth at the moment impressions were taken. Your gums will change drastically over the next few months and it is possible that the dentures will rub against the gums causing some soreness until the denture is adjusted. Most patients will require a realignment of their denture within the first few months due to the gums shrinking from the extraction of teeth. Another benefit of immediate dentures is the fact that the dentures act as a bandage to the extraction sites which covers the tooth sockets and prevents them from becoming irritated. Just remember, never remove the denture yourself, even for a brief moment unless your dentist has instructed you to. The gums have a tendency to swell when uncovered at first; and if you are without your dentures for a little while, they may never go back in.
Immediate Dentures: Immediate dentures, as the name implies, are placed as soon as the natural teeth are removed. With immediate dentures, the patient need not face the world without teeth, can eat normally much sooner than with conventional dentures, and does not have the speech problems associated with the normal denture process. However, since healing of the gums and jaw will change the fit of immediate dentures, the patient will typically need a new set in about six months.
Only his assistant - she did his job great. But I didn't pay her. I paid him. He nonchalantly walked down the hall not even stopping to take a look at my jawline that's showing. I love my immediate dentures. But the money I paid. I think I should have a decent dentist that is interested in helping his patient with care. My Medicaid dentist treats me better and he doesn't get paid so much.
When dentures no longer fit well, the correct action is to seek follow-up care. Denture adhesive is recommended for dentures, even well fitting ones. Adhesives improve retention, seal the borders to prevent food from slipping under, and cusion the soft tissues from the rigid acrylic. Using denture adhesive may improve the fit, but it tends to work best when only a small amount is used. Covering the entire denture fitting surface in adhesive makes it stay in less well. Adhesives may compensate for gradual loosening of a denture, but it is only a temporary solution; it does not solve the problem. Fortunately, dentures can often be relined with relining materials to improve the fit, and this process costs less than creation of new dentures. Overall, a well-made denture could last about 5 years (or more), but this is different for every patient.
Removable complete denture. This denture sits on top of the gums where the missing teeth were. It can be uncomfortable, affect your ability to experience the full taste of food, cause sore gums, and shift and click in your mouth when you speak, eat, smile, yawn or cough. While the initial costs are low, they only last an average of 7 to 15 years, and the replacement costs can be significant over the long term. They need to be removed regularly for cleaning, which can be a time-consuming hassle. Also, as with a partial denture, the natural bone underneath a complete denture may deteriorate over time, permanently changing the appearance of your smile and face.
