Getting 16 teeth pulled is about as pleasant as it sounds. I have had many teeth extracted in the past and this was by far the most unpleasant experience I have had. The most curious thing about this visit was there was NO assistant involved in the actual dental work. The dentist was working alone for the entire time. Maybe this is standard procedure at some places but it felt odd to me. The dentist was VERY rough and borderline careless during the extractions. She had to yank especially hard to remove some of the teeth at the bottom of my mouth. I immediately felt pain despite being numb.
After deciding on having the extractions and the full plate, I decided on the "Premium" denture. You can see 3 different types of dentures. Economy, Good and Premium. It's pretty easy, if you want the longest lasting, then get the premium. Economy dentures often break after a couple years... I had to pay the full amount right then, before they would go any further. They want all the money in advance or they don't do the dentures. Be prepared to pay up front in full, before you go, or don't go.
The low-end cost for a full-mouth restoration is about $11,000, a reasonable financial investment compared to a mouthful of single implants (which could run $160,000). A dental practice representing that they can provide a complete-mouth restoration starting at $1,000 is certainly being disingenuous and deceptive. At a minimum, such a procedure requires at least 4 implants and would “start” at a figure closer to $9,000, although probably much higher when considering extractions and prosthetic costs.
As of now I essentially have no teeth and won't until at least 2-3 months later when I am supposed to return for my "permanent denture". It is incredibly humiliating having to go out in public with no teeth. I returned to ask what they could do and they wanted around 300 bucks for a reline but recommended I just get a new denture made (which they of course wanted to charge me around 600 bucks for). I couldn't believe what I was hearing. They made an awful denture and refused to fix it. Suddenly all of the nightmare stories began to make sense. I kindly told them to screw off and that I would just wait a few months.
Remember when I mentioned the people up front being incompetent? The worst part is that they botched the paperwork with my insurance company and now I owe Affordable Dentures 700 bucks (which I really don't have). I implore anyone who is thinking about Affordable Dentures to listen to what I am saying. If possible save your money and wait. Or perhaps see if you have a family member who can help you pay to get the work done at a reputable dentist.
The fabrication of a set of complete dentures is a challenge for any dentist/denturist. There are many axioms in the production of dentures that must be understood; ignorance of one axiom can lead to failure of the denture. In the vast majority of cases, complete dentures should be comfortable soon after insertion, although almost always at least two adjustment visits are necessary to remove the cause of sore spots. One of the most critical aspects of dentures is that the impression of the denture must be perfectly made and used with perfect technique to make an accurate model of the patient's edentulous (toothless) gums. The dentist or denturist must use a process called border molding to ensure that the denture flanges are properly extended. An array of problems may occur if the final impression of the denture is not made properly. It takes considerable patience and experience for a dentist to know how to make a denture, and for this reason it may be in the patient's best interest to seek a specialist, either a prosthodontist or denturist, to make the denture. A denturist is a trained and licensed professional who sees patients in need of dentures, partials, relines or repairs. A denturist not only takes the impression, but makes the entire denture in his or her own laboratory. The denturist then schedules a date for the delivery of the finished dentures to the patient. A general dentist may do a good job making dentures, but only if he or she is meticulous and experienced. Many dentists no longer make dentures themselves. but instead take an impression of the patients' mouth and then either send the impressions to a dental laboratory, which could be anywhere in the world, or send the patient to a denturist. Once the laboratory receives dental impressions of the patient's mouth, the laboratory creates plaster molds from them. The laboratory uses the molds to create the wax rims used to register the patient's bite. These wax rims are returned to the dentist, who uses them to register the patient's bite. The dentist may assist the patient in choosing the correct size of teeth for the dentures, or simply make the selection himself. Once bite registration is completed and the teeth are selected for the dentures, the wax rim is usually returned to the dental laboratory in order to have the denture teeth set into the wax. Once the teeth are set into the wax rim, the result is a prefinished denture that looks almost like the finished product. This prefinished denture is usually returned to the dentist's office and the patient usually has a chance to approve the setup (for immediate or standard dentures) or to try the denture before it is finished. After approval by the patient, the dentist returns the pre-denture to the laboratory for final processing. The finished denture is then returned to the dentist's office for delivery to the patient.
Bankrate.com is an independent, advertising-supported publisher and comparison service. Bankrate is compensated in exchange for featured placement of sponsored products and services, or your clicking on links posted on this website. This compensation may impact how, where and in what order products appear. Bankrate.com does not include all companies or all available products.
The lower denture's teeth surface is even with the gum surface making the lower plate essentially flat. I mean there is no white tooth higher than the pink gum material. Not knowing the difference and trusting these so called "professionals," I have worn the partials for 8 years now and my bite is so off that my upper and lower front teeth butt against each other and has resulted in wearing them flat, taking the edge off them.
I have only 4 teeth on the top of my mouth. This causes me to be pretty depressed. Maybe this is why I fell for it. I went to my free consultation, this I found out later was free because they would get money later. I explained to them I have been told I have a lot of bone loss so worry I am not able to get this done. The doctor came in after the 2d exam and explained to me he could do one with 4 implants. Although not the one I wanted as I want the nonremovable, these were affordable and could be done. They then come in and give you a sheet with the full plan.
Stability is the principle that describes how well the denture base is prevented from moving in a horizontal plane, and thus sliding from side to side or front to back. The more the denture base (pink material) is in smooth and continuous contact with the edentulous ridge (the hill upon which the teeth used to reside, but now only residual alveolar bone with overlying mucosa), the better the stability. Of course, the higher and broader the ridge, the better the stability will be, but this is usually a result of patient anatomy, barring surgical intervention (bone grafts, etc.).
Stability is the principle that describes how well the denture base is prevented from moving in a horizontal plane, and thus sliding from side to side or front to back. The more the denture base (pink material) is in smooth and continuous contact with the edentulous ridge (the hill upon which the teeth used to reside, but now only residual alveolar bone with overlying mucosa), the better the stability. Of course, the higher and broader the ridge, the better the stability will be, but this is usually a result of patient anatomy, barring surgical intervention (bone grafts, etc.).
Removable complete denture. This denture sits on top of the gums where the missing teeth were. It can be uncomfortable, affect your ability to experience the full taste of food, cause sore gums, and shift and click in your mouth when you speak, eat, smile, yawn or cough. While the initial costs are low, they only last an average of 7 to 15 years, and the replacement costs can be significant over the long term. They need to be removed regularly for cleaning, which can be a time-consuming hassle. Also, as with a partial denture, the natural bone underneath a complete denture may deteriorate over time, permanently changing the appearance of your smile and face.
