They do not use insurance, so don't ask. It's cash or credit card up front. I paid $1,330.00 for 7 extractions, a temporary denture till I heal and a permanent denture within a year. I know first hand that going the other way with a super good dentist, would have resulted in an Oral Surgeon, a Dentist and an expensive Denture Lab. It would have cost me over $5,000 if I had gone the best way... I made an appointment for a week later, to have the teeth removed and before that I went one morning to have my form made, so the temporary denture could be ready for the extraction day... The following lines are my thoughts about the people there...
Implant-supported dentures offer a number of benefits over traditional dentures. Patients with implant-supported dentures can eat, speak, and smile with confidence, knowing that their dentures are securely in place. Further, implant-supported dentures can actually improve a patient's oral health. Read on to learn more about the benefits of implant-supported dentures.
Tooth extraction and restoration: If tooth decay or gum disease is so severe that a tooth can't be saved, it will need to be extracted. Your dentist will examine the remaining teeth in your mouth and determine if they should be removed or restored with tooth-colored fillings, inlays, onlays, or dental crowns. After the teeth have been extracted, the gums need at least two to three months to heal before an implant can be placed or an impression taken.
The first visit was nice enough. The receptionists were polite even if they didn't seem to have a clue what they were doing. The only bad experience I had was a very rude lady who dealt with the mountains of paperwork I was filling out. You could clearly tell that she hated her job. With that being said you run into unpleasant people every day and unless you are incredibly thin skinned it shouldn't bother you. It was the least of my problems.
Once the actual extractions were over they stitched my mouth up and inserted my temporary denture. Now I consider myself a very tolerant person. I was willing to look past the sales pitches, the potentially broken jaw, and the incompetent receptionists. What really set me off is when the denture itself was so poorly made that it would not even stay in my mouth. I knew something was up when the lady who inserted the denture told me that I would need to wear "a lot" of adhesive to get the denture to stay in. Despite the fact that my mouth was swollen and that my gums had not yet receded at all.
In the past, the artificial teeth that make up dentures were made out of porcelain or plastic, but more modern dentures are generally made out of a hard resin. The materials used to make denture teeth are known to be more fragile than natural teeth and can easily chip or crack if dropped or otherwise uncared for. This material also wears down much quicker than natural teeth and thus must be replaced with a new set of dentures every five years or so.
After six months you receive the final denture, which locks into place, making it a long-lasting smile solution that will restore not just your smile, but a higher quality of life. From there, you’ll worry no more about smiling, eating or speaking, meaning you can focus on simply maintaining good oral hygiene to ensure the dentures last for many years to come.

DENTURES DO NOT FIT! DO NOT USE AFFORDABLE! #BOYCOTTAFFORDABLEDENTURES. My father went in for dentures, they are so loose he cannot eat healthy. The first time he went back they put a liner in the uppers to make them tighter, he is using a lot of Poligrip on both the uppers and lowers. He had teeth removed from the bottom and they waited for the gums to heal before measuring for dentures. It has been about 3 months and the dentures, especially the bottom are so loose it hurts him to eat because food gets stuck under the dentures. It is funny because on his first visit the Affordable dentist made fun of how loose his upper dentures were (he has had them for 4 years), they were done by a different dentist. On his first visit he was told by the dentist that the Affordable dentures would fit tight, they don't!
Every tooth in your mouth is vital to maintaining proper alignment, and spaces left behind by one or more missing teeth can have an effect on your bite, speech, smile, and face shape. Missing teeth can cause your remaining teeth to shift and cause problems with your bite. To preserve your oral health and dental hygiene, you should weigh your options when it comes to tooth replacement treatments and choose the procedure that meets your needs.
On the cheap or “discount denture” end, you get units with premade fits that often look artificial. Less expensive sets are generally made with lower quality materials and their warranties reflect that. In the end, cheap dentures lack the desired lifelike look, are more prone to crack or break outright, may have poor bite alignment, and are typically less comfortable.

A mid-priced (and better quality) heat cured denture typically costs $500–$1,500 per denture or $1,000-$3,000 for a complete set. The teeth look much more natural and are much longer lasting than cold cured or temporary dentures. In many cases, they may be tried out before they are finished to ensure that all the teeth occlude (meet) properly and look esthetically pleasing. These usually come with a 90-day to two-year warranty and in some cases a money-back guarantee if the customer is not satisfied. In some cases, the cost of subsequent adjustments to the dentures is included.


I have only 4 teeth on the top of my mouth. This causes me to be pretty depressed. Maybe this is why I fell for it. I went to my free consultation, this I found out later was free because they would get money later. I explained to them I have been told I have a lot of bone loss so worry I am not able to get this done. The doctor came in after the 2d exam and explained to me he could do one with 4 implants. Although not the one I wanted as I want the nonremovable, these were affordable and could be done. They then come in and give you a sheet with the full plan.
The office people and assistants must be low wage workers. They have the typical low paid, high stress lack of concern for the patient. The person who did my form did not do it well. That was evidenced in the quality of the temporary denture. The Dentist who did the extractions was the absolute best dentist I have ever seen in my 55+ years. They give you a pill to take an hour before you get there and if needed, one when you arrive. It relaxes you and one was enough for me. I was ready to go to sleep. They took me straight in and the dentist took 20 minutes numbing every tooth with a local anesthetic.

The general rule is: brush, soak and brush again. Always clean your denture over a bowl of water or a folded towel in case you drop it. Brush your denture before soaking them, to help remove any bits of food. Using an effervescent (fizzy) denture cleaner will help remove stubborn stains and leave your denture feeling fresher - always follow the manufacturer's instructions. Then brush the denture again, as you would your own teeth, being careful not to scrub too hard as this may cause grooves in the surface.
Sulphamic acid is a type of acid cleanser that is used to prevent the formation of calculus on dentures. Suphlamic acid has a very good compatibility with many denture materials, including the metals used in denture construction.[32] 5% hydrochloric acid is another type of acid cleanser. In this case, the denture is immersed in the hydrochloric cleanser to soften the calculus so that it can be brushed away. The acid can cause damage to clothes if accidentally spilt and could cause corrosion of cobalt-chromium or stainless steel if immersed in the acid often and over long periods of time.[32]
I started getting bone protruding hurting so I called to see about going in and was told he couldn't see me till Monday. So I asked for my pain medicine to be refilled since I had to get through Friday till Monday. And the receptionist politely told me "no", that he wasn't in and told me just to rinse with warm salt water. I did what I was told and suffered through my weekend. By the time I was finally to be seen my dentist didn't even come in to see his handiwork.

If dentures are medically necessary, insurance might pay 15%-50% of the costs (up to the plan's annual limit, if there is one). A basic denture starts at about $300-$500 per plate, or $600-$1,000 for a full set of upper and lower teeth. These typically have limited warranties, don't last as long as more expensive models, tend to look artificial and may be adapted from a standard size instead of a customized fit.
Premium heat cured dentures can cost $2,000-$4,000 per denture, or $4,000-$8,000 or more for a set. Dentures in this price range are usually completely customized and personalized, use high-end materials to simulate the lifelike look of gums and teeth as closely as possible, last a long time and are warranted against chipping and cracking for 5–10 years or longer. Often the price includes several follow-up visits to fine-tune the fit.
Our hope is that, regardless of your skill level when you join one of our lab teams, you will continue to grow as a dental lab professional. ADDL was founded by and is managed by dental lab technicians. What does this mean for you? Not only will you be managed by someone who has experience working in your position, you will have the opportunity to be considered for management team positions, such as on-site management and upper-management roles.
The safe, healthy choice is to not sleep with your partial denture in place. Sleeping with partial dentures is not recommended for a number of reasons. Partial dentures are designed to be cleaned outside the mouth – which also provides the opportunity to ensure no food particles are lodged under or around the partial. Proper oral care and keeping you partial denture clean is vital for the overall health of your gums. From a physical standpoint, your gums will benefit from the opportunity to rest and recover. Also, some patients may clench their teeth in their sleep. This pressure can cause damage to both natural teeth as well as dentures.
Been struggling with getting my dentures since June. After waiting weeks for first appointment, came back for second appointment. Was told can't complete services because location was then closing for a week because first doc was fired. Asked me to reschedule at least a week after reopening since they'd need to catch up. So I rearranged my schedule. OK. Came back yesterday, Thursday, and the girl dropped my impression on the floor right in front of me, then told me to come back at 1:00. I asked if needed to redo the impression but she just brushed it off. As soon as I was 10 miles away, I was called back to redo the impression because they needed a better one. OK. So I return and make another impression, and left with pain, bleeding, and swelling. Told to return at 1:30 to get my new teeth. OK.
Tooth-supported fixed bridge. The most common alternative to dental implants for a single tooth, fixed bridges involve grinding away – in other words, intentionally damaging – healthy adjacent teeth that are used to attach and support the bridge. The tooth-supported bridge does not stimulate natural bone growth beneath it, so the bone may deteriorate over time. Bridges generally fail after 5-10 years because patient have difficulty flossing them, which makes the root surfaces below and around the bridgework highly susceptible to decay.

The fabrication of a set of complete dentures is a challenge for any dentist/denturist. There are many axioms in the production of dentures that must be understood; ignorance of one axiom can lead to failure of the denture. In the vast majority of cases, complete dentures should be comfortable soon after insertion, although almost always at least two adjustment visits are necessary to remove the cause of sore spots. One of the most critical aspects of dentures is that the impression of the denture must be perfectly made and used with perfect technique to make an accurate model of the patient's edentulous (toothless) gums. The dentist or denturist must use a process called border molding to ensure that the denture flanges are properly extended. An array of problems may occur if the final impression of the denture is not made properly. It takes considerable patience and experience for a dentist to know how to make a denture, and for this reason it may be in the patient's best interest to seek a specialist, either a prosthodontist or denturist, to make the denture. A denturist is a trained and licensed professional who sees patients in need of dentures, partials, relines or repairs. A denturist not only takes the impression, but makes the entire denture in his or her own laboratory. The denturist then schedules a date for the delivery of the finished dentures to the patient. A general dentist may do a good job making dentures, but only if he or she is meticulous and experienced. Many dentists no longer make dentures themselves. but instead take an impression of the patients' mouth and then either send the impressions to a dental laboratory, which could be anywhere in the world, or send the patient to a denturist. Once the laboratory receives dental impressions of the patient's mouth, the laboratory creates plaster molds from them. The laboratory uses the molds to create the wax rims used to register the patient's bite. These wax rims are returned to the dentist, who uses them to register the patient's bite. The dentist may assist the patient in choosing the correct size of teeth for the dentures, or simply make the selection himself. Once bite registration is completed and the teeth are selected for the dentures, the wax rim is usually returned to the dental laboratory in order to have the denture teeth set into the wax. Once the teeth are set into the wax rim, the result is a prefinished denture that looks almost like the finished product. This prefinished denture is usually returned to the dentist's office and the patient usually has a chance to approve the setup (for immediate or standard dentures) or to try the denture before it is finished. After approval by the patient, the dentist returns the pre-denture to the laboratory for final processing. The finished denture is then returned to the dentist's office for delivery to the patient.


After deciding on having the extractions and the full plate, I decided on the "Premium" denture. You can see 3 different types of dentures. Economy, Good and Premium. It's pretty easy, if you want the longest lasting, then get the premium. Economy dentures often break after a couple years... I had to pay the full amount right then, before they would go any further. They want all the money in advance or they don't do the dentures. Be prepared to pay up front in full, before you go, or don't go.
While wearing removable dentures, patients should not chew gum or use toothpicks. In addition, patients need to be careful when eating food that is hot or hard, as well as anything with bones or shells. It may take a while to get used to chewing with dentures, so Dallas Laser Dentistry suggests patients start with softer foods that are cut into small pieces. Chewing slowly and using both sides of the mouth may also help some patients.
Our process allows most patients to arrive early in the morning to make impressions for your denture, have your extractions done during the day, and receive your dentures by the end of the day. With our DDS All-In-One Solution, you could have an all-new smile in the same day, thanks to our state-of-the-art 3D X-ray technology. This set of teeth, although temporary, locks into place, meaning you can immediately begin the transition from eating softer foods, to eating the foods you want again.
Dentures are just one option for replacing missing teeth; some of the others include fixed bridgework and dental implants. Each method has its particular pluses and minuses, which should be carefully considered. There are also several varieties of dentures available to address specific issues, from partial dentures to implant-supported overdentures. The best option for you will depend on your individual situation.
Occasionally, denture wearers may use adhesives. Adhesives come in many forms: creams, powders, pads/wafers, strips or liquids. If you use one of these products, read the instructions, and use them exactly as directed. Your dentist can recommend appropriate cleansers and adhesives; look for products with the ADA Seal of Acceptance. Products with the ADA Seal have been evaluated for safety and effectiveness.
×